Frame Relay show Command and debug Command Enhancements
The Frame Relay show Command and debug Command Enhancements feature provides the ability to filter the output of certain Frame Relay show and debug commands on the basis of the interface and data-link connection identifier (DLCI). These enhancements facilitate network scalability and simplify network management and troubleshooting.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Information About Frame Relay show Command and debug Command Enhancements
- Overview of the Frame Relay show Command and debug Command Enhancements
- Benefits of the Frame Relay Show Command and Debug Command Enhancements
Overview of the Frame Relay show Command and debug Command Enhancements
This feature introduces the following enhancments:
- The show frame-relay map command has been enhanced to allow map information to be displayed for specific interfaces and DLCIs.
- The show frame-relay ip tcp header-compression and show frame-relay ip rtp header-compression commands have been enhanced to allow header-compression information to be displayed for specific DLCIs.
- The summary keyword was added to the show frame-relay pvc command, allowing a summary of all PVCs on the system to be displayed.
- Conditional debugging support, which allows debug output to be filtered on the basis of interface and DLCI, was introduced for the following commands:
- debug frame-relay end-to-end
- debug frame-relay events
- debug frame-relay fragment
- debug frame-relay fragment event
- debug frame-relay ip
- debug frame-relay ppp
- debug frame-relay verbose
 Note |
Conditional debugging for Frame Relay debug commands is configured by using the debug condition command. |
Benefits of the Frame Relay Show Command and Debug Command Enhancements
The Frame Relay show Command and debug Command Enhancements allow the output for some Frame Relay show commands and debug commands to be filtered on the basis of interface and DLCI. This enhancement saves network administrators time and frustration by eliminating the need to look through a large amount of output for information about a specific interface or DLCI. These enhancements can also reduce the amount of CPU processing time that is required to generate large amounts of show and debug output.
Additional References
Related Documents
| Related Topic |
Document Title |
|---|---|
| Cisco IOS XE Wide-Area Networking configuration tasks |
Cisco IOS XE Wide-Area Networking Configuration Guide, Release 2 |
| Wide-Area networking commands |
Cisco IOS Wide-Area Networking Command Reference |
Standards
| Standard |
Title |
|---|---|
| None |
-- |
MIBs
| MIB |
MIBs Link |
|---|---|
| No new or modified MIBs are supported by this feature, and support for existing MIBs has not been modified by this feature. |
To locate and download MIBs for selected platforms, Cisco IOS XE software releases, and feature sets, use Cisco MIB Locator found at the following URL: |
RFCs
| RFC |
Title |
|---|---|
| None |
-- |
Technical Assistance
| Description |
Link |
|---|---|
| The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. |
Feature Information for Frame Relay show Command and debug Command Enhancements
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
| Table 1 | Feature Information for Frame Relay show Command and debug Command Enhancements |
| Feature Name |
Releases |
Feature Information |
|---|---|---|
| Frame Relay show Command and debug Command Enhancements |
Cisco IOS XE Release 2.1 |
The Frame Relay show Command and debug Command Enhancements feature provides the ability to filter the output of certain Frame Relay show and debug commands on the basis of the interface and DLCI. |
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
Feedback