Interface and Hardware Component Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 7.11.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 1, 2023

Chapter: New and Changed Feature Information

New and Changed Feature Information
Interface and Hardware Component Features Added or Modified in IOS XR Release 7.11.x

New and Changed Feature Information

This table summarizes the new and changed feature information for the Interfaces Configuration Guide for Cisco 8000 Series Routers for Cisco 8000 Series Routers, and tells you where they are documented.

Interface and Hardware Component Features Added or Modified in IOS XR Release 7.11.x

Table 1. New and Changed Features
Feature	Description	Introduced in Release	Where Documented
Outer IP Header-Driven Hash Computation for Incoming GUE Packets	This feature was introduced.	Release 7.11.1	Configuring Generic UDP Encapsulation
Loopback on Optical Transceivers	This feature was introduced.	Release 7.11.1	Loopback on Optical Transceivers
Disable Auto-Squelching	This feature was introduced.	Release 7.11.1	Disable Auto-Squelching

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)