L2VPN Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 24.1.x , 24.2.x , 24.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 1, 2024

New and Changed L2VPN Features

This table summarizes the new and changed feature information for the L2VPN Configuration Guide for Cisco 8000 Series Routers, and tells you where they are documented.

New and Changed L2VPN Features

Table 1. L2VPN Features Added or Modified in IOS XR Release 24.x.x
Feature	Description	Changed in Release	Where Documented
Pseudowire Headend	This feature was introduced	Release 24.3.1	Pseudowire Headend
Traffic Mirroring on PWHE	This feature was introduced	Release 24.3.1	Traffic Mirroring on PWHE
Withdraw Dynamic MAC Addresses Between Peer PE Routers	This feature was introduced	Release 24.2.11	Withdraw Dynamic MAC Addresses Between Peer PE Routers
G.8032 Ethernet Ring Protection Switching	This feature was introduced	Release 24.2.11	G.8032 Ethernet Ring Protection Switching
Dot1Q Q-in-Q (0x8100/0x8100) Tunneling for VLAN Subinterface Encapsulation	This feature was introduced	Release 24.1.1	Introduction to Virtual LANs in Layer 2 VPNs

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)