New and Changed L2VPN Features

This table summarizes the new and changed feature information for the L2VPN Configuration Guide for Cisco 8000 Series Routers, and tells you where they are documented.

New and Changed L2VPN Features

Table 1. L2VPN Features Added or Modified in IOS XR Release 7.3.x

Feature

Description

Changed in Release

Where Documented

CFM on VPLS

This feature was introduced.

Release 7.3.2

CFM on VPLS

Split-Horizon Groups

This feature was introduced.

Release 7.3.2

Split-Horizon Groups

Traffic Storm Control

This feature was introduced.

Release 7.3.2

Traffic Storm Control

Transparent Layer 2 Protocol Tunneling

This feature was introduced.

Release 7.3.2

Transparent Layer 2 Protocol Tunneling

Virtual Private LAN Services

This feature was introduced.

Release 7.3.2

Virtual Private LAN Bridging Services

GTP Load Balancing

This feature was introduced.

Release 7.3.2

GTP Load Balancing

Inter-AS Mode for L2VPN Pseudowire

This feature was introduced.

Release 7.3.15

Inter-AS Mode

Load Balance MPLS PW Traffic using Control-Word

This feature was introduced.

Release 7.3.15

Load Balance MPLS PW Traffic using Control-Word and Flow-Label

Load Balance MPLS PW Traffic using Flow-Label

This feature was introduced.

Release 7.3.15

Load Balance MPLS PW Traffic using Control-Word and Flow-Label

Pseudowire over MPLS

This feature was introduced.

Release 7.3.15

Pseudowire over MPLS

Pseudowire VC Type 4

This feature was introduced.

Release 7.3.15

VLAN Mode

Pseudowire VC Type 5

This feature was introduced.

Release 7.3.15

Ethernet Port Mode

Support of Tagged or Untagged VLAN on Physical Rewrite

This feature was introduced.

Release 7.3.15

Configure Local Switching Between Attachment Circuits