MPLS Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 7.11.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 8, 2023

New and Changed MPLS Features

This table summarizes the new and changed feature information for the MPLS Configuration Guide for Cisco 8000 Series Routers, and tells you where they are documented.

New and Changed MPLS Feature Information

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
Tear down and Reestablishment of RSVP-TE Tunnels	This feature was introduced.	Release 7.11.1	Teardown and Reestablishment of RSVP-TE Tunnels
Auto-Enabling of LDP Tunnels over TE	This feature was introduced.	Release 7.11.1	Auto-enable LDP on all TE Tunnel Interfaces
GMPLS User Network Interface (UNI) to Manage Optical Networks	This feature was introduced.	Release 7.11.1	Implementing GMPLS UNI

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)