Skip to content
Skip to search
Skip to footer

MPLS Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 7.5.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 1, 2023

Chapter: New and Changed MPLS Features

New and Changed MPLS Features
New and Changed MPLS Feature Information

New and Changed MPLS Features

This table summarizes the new and changed feature information for the MPLS Configuration Guide for Cisco 8000 Series Routers, and tells you where they are documented.

New and Changed MPLS Feature Information

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
Enhanced Policy-Based Tunnel Selection to Support Recursive Prefixes	This feature was modified.	Release 7.5.4	Policy-Based Tunnel Selection
Attribute Set for Named Tunnels	This feature was introduced.	Release 7.5.3	Attribute Set for Named Tunnels
Configure MPLS over UDP	This feature was introduced.	Release 7.5.3	Configure MPLS over UDP
Enable LDP over TE Automatically on Cloned Tunnels	This feature was introduced.	Release 7.5.3	Enable LDP over TE Automatically on Cloned Tunnels
Increase in RSVP-TE Tunnel Scale for LDP over TE	This feature was introduced.	Release 7.5.3	Increase in RSVP-TE Tunnel Scale for LDP over TE
Self-Ping Probe for Reoptimized LSP	This feature was introduced.	Release 7.5.3	Self-Ping Probe for Reoptimized LSP
Policy-Based Tunnel Selection	This feature was introduced.	Release 7.5.3	Policy-Based Tunnel Selection
Controlling State Advertisements in an mLDP-Only Setup	This feature was introduced.	Release 7.5.2	Controlling State Advertisements in an mLDP-Only Setup
Load Balancing based on the Position of Entropy Label	This feature was introduced.	Release 7.5.2	Load Balancing based on the Position of Entropy Label

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)