New and Changed Information for Segment Routing Features

This table summarizes the new and changed feature information for the Segment Routing Configuration Guide for Cisco 8000 Series Routers, and lists where they are documented.

New and Changed Segment Routing Features

Segment Routing Features Added or Modified in IOS XR Release 7.10.x

Feature Description Changed in Release Where Documented

SRv6 Traffic Engineering

The feature is introduced

Release 7.10.1

Configure SRv6 Traffic Engineering

SRv6 Traffic Accounting

The feature is introduced

Release 7.10.1

SRv6 Traffic Accounting

Local ECMP Support on SRTE

The feature is introduced

Release 7.10.1

Local ECMP Support on SRTE

Configurable Filters for IS-IS Advertisements to BGP-Link State

The feature is introduced

Release 7.10.1

Configurable Filters for IS-IS Advertisements to BGP-Link State

Static Route Traffic-Steering using SR-TE Policy

The feature is introduced

Release 7.10.1

Static Route Traffic-Steering using SR-TE Policy

Multicast VPN: Dynamic Tree-SID Multicast VPN IPv6

The feature is introduced

Release 7.10.1

Multicast VPN: Dynamic Tree-SID Multicast VPN IPv6

Multicast: Cisco Nonstop Forwarding for Tree-SID

The feature is introduced

Release 7.10.1

Multicast: Cisco Nonstop Forwarding for Tree-SID

Label Distribution Protocol over Segment Routing Policy

The feature is introduced

Release 7.10.1

Label Distribution Protocol over Segment Routing Policy

IS-IS Partition Detection and Leakage of Specific Route Advertisements

The feature is introduced

Release 7.10.1

IS-IS Partition Detection and Leakage of Specific Route Advertisements