New and Changed Information for Segment Routing Features

This table summarizes the new and changed feature information for the Segment Routing Configuration Guide for Cisco 8000 Series Routers, and lists where they are documented.

New and Changed Segment Routing Features

Segment Routing Features Added or Modified in IOS XR Release 7.11.x

Feature Description Changed in Release Where Documented

Two-Way Active Measurement Protocol Light Source Address Filtering

The feature is introduced.

Release 7.11.1

Two-Way Active Measurement Protocol Light Source Address Filtering

SR Policy Liveness Monitoring on Segment Routing over IPv6 (SRv6)

The feature is introduced.

Release 7.11.1

SR Policy Liveness Monitoring

IS-IS Flexible Algorithm with Exclude Maximum Delay Constraint

The feature is introduced.

Release 7.11.1

Flexible Algorithm with Exclude Maximum Delay Constraint

IS-IS Flexible Algorithm with Exclude Minimum Bandwidth Constraint

The feature is introduced.

Release 7.11.1

Flexible Algorithm with Exclude Minimum Bandwidth Constraint

Microloop Avoidance for IS-IS with Per-Prefix Filtering

The feature is introduced.

Release 7.11.1

Microloop Avoidance for IS-IS with Per-Prefix Filtering

Maximum Paths Per IS-IS Flexible Algorithm Per Prefix

The feature is introduced.

Release 7.11.1

Maximum Paths Per IS-IS Flexible Algorithm Per Prefix

SR-TE Application Programming Interface (API)

The feature is introduced.

Release 7.11.1

SR-TE Application Programming Interface (API)

SRv6-Services: L3 Services with Local SIDs from W-LIB

The feature is introduced.

Release 7.11.1

SRv6-Services: L3 Services with Local SIDs from W-LIB

SR-TE: Per Flow Automated Steering

The feature is introduced.

Release 7.11.1

Per-Flow Automated Steering

Autoroute Include

The feature is introduced.

Release 7.11.1

Autoroute Include

VRF Allocation Mode for uDT46 Endpoint Behavior

The feature is introduced.

Release 7.11.1

Configuring SRv6 BGP-Based Services