Skip to content
Skip to search
Skip to footer

System Management Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 24.1.x , 24.2.x , 24.3.x , 24.4.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 14, 2024

Chapter: New and Changed System Management Features

New and Changed System Management Features
System Management Features Added or Modified in IOS XR Release 24.X.X

New and Changed System Management Features

This chapter lists all the features that have been added or modified in this guide. The table also contains references to these feature documentation sections.

System Management Features Added or Modified in IOS XR Release 24.X.X


Feature	Description	Changed in Release	Where Documented
Periodic Shutdown Syslog Message	This feature is introduced.	Release 24.4.1	Periodic shutdown syslog messages
Machine Check Errors Notification	This feature is introduced.	Release 24.4.1	Machine check error notifications
Support for Precision Time Protocol (PTP) on 8212-48FH-M Router	This feature is introduced.	Release 24.4.1	Configuring PTP
Concurrent Configuration Rebase during Commit	This feature is introduced.	Release 24.3.1	Concurrent Configuration Rebase during Commit
Performance Monitoring for PTP Networks	This feature is introduced.	Release 24.3.1	Performance Monitoring for PTP Networks
Power Redundancy Protection	This feature is introduced.	Release 24.1.1	Power Redundancy Protection
View VRF-specific Configuration	This feature is introduced.	Release 24.2.11	View VRF-specific Configuration
Fault Recovery Handling	This feature is introduced.	Release 24.2.11	Fault Recovery Handling
Increasing Commit Limit	This feature is introduced.	Release 24.2.11	Increasing Commit Limit
Fabric Link Management for Uncorrectable Errors	This feature is introduced.	Release 24.2.11	Fabric Link Management for Uncorrectable Errors

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)