System Management Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 7.5.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: April 30, 2022

Chapter: Configuration and File System Management

Configuration and File System Management
Auto-Save Configuration
- Configure Auto-Save

Configuration and File System Management

This module describes methods for configuration management and file transfer enhancements.

Auto-Save Configuration

You can configure the router to automatically take the backup of the running configuration by using configuration commit auto-save command. This auto-save feature saves the configuration to the specified location on the router after every commit is made. These auto-save files are stored in the form of Linux files.

Configure Auto-Save

Use the configuration commit auto-save command to auto save the configuration.

Router#configure
Router(config)#configuration commit auto-save
Router(config-cfg-autosave)#commit

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)