Feature, Release, and Platform Matrix for Timing and Synchronization
Feature Name |
8000 Series Routers |
Other IOS XR Routing Platforms |
---|---|---|
PTP Support on 88-LC1-12TH24FH-E and 88-LC1-52Y8H-EM |
8000, R24.3.1 |
— |
PTP on Cisco 8608 Router |
8000, R24.3.1 |
— |
Synchronous Ethernet (SyncE) Support on Cisco 8711-32FH-M Router |
— |
|
Precision Time Protocol (PTP) Support on Cisco 8711-32FH-M Router |
8000, R24.3.1 |
— |
Global Navigation Satellite System (GNSS) Support on Cisco 8711-32FH-M Router |
— |
|
PTP on 88-LC0-36FH-M and 8800-LC-36FH |
— |
|
PTP on Route Processor 8000-RP2 |
8000, R7.11.1 |
— |
NTP-PTP Interworking |
||
Synchronous Ethernet (SyncE) on Cisco 8011-2X2XP4L PLE Service Endpoint Routers |
— |
|
Precision Time Protocol (PTP) on Cisco 8011-2X2XP4L PLE Service Endpoint Routers |
— |
|
FQDN for NTP Server on Non-default VRF |
||
Synchronous Ethernet (SyncE) on 8202-32FH-M Routers and 88-LC0-36FH-M Line cards |
— |
|
Precision Time Protocol (PTP) on 8202-32FH-M Routers and 88-LC0-36FH-M Line cards |
— |
|
PTP Delay Asymmetry |
||
Frequency Synchronization |
— |
|
Ethernet Synchronization Message Channel (ESMC) |
— |
|
Precision Time Protocol (PTP) |
— |
|
ITU-T G.8263 standard for secondary clock with ITU-T G.8265.1 profile |
— |
|
ITU-T G.8275.1 profile |
— |
|
Support for ITU-T G.8264 Standard |
— |
|
ITU-T G.8275.2 and Default PTP profiles over IPv6 |
— |
|
PTP Double Failure Clock Class |
— |
|
Use PTP Virtual Port to Select Timing Source |
— |
|
Use APTS to Select Timing Source |
— |
|
PTP Holdover Traceability Suppression |
— |
|
SyncE Support on 5th Generation 10-Port 400 Gigabit Ethernet Line Cards:
|
— |
|
Class C Timing Mode |
— |
|
Precision Time Protocol on 12-port 100 Gigabit Ethernet line cards, ASR 9000 5th generation 400G line cards, ASR 9902 Series Routers, and 0.8T PEC |
— |
|
PTP support on 5th Generation 10-Port 400 Gigabit Ethernet Line Cards:
|
— |
|
Enhanced SyncE and extended ESMC |
— |
|
Synchronous Ethernet ESMC and SSM on N540X-16Z4G8Q2C-A/D |
— |
|
Synchronous Ethernet ESMC and SSM on N540-6Z14S-SYS-D |
— |
|
Synchronous Ethernet ESMC and SSM, and ITU-T G.8262.1 |
— |
|
Frequency Synchronization on the N540X-4Z14G2Q-SYS-A/D routers. |
— |
|
TSoP Smart SFP for SDH and SONET Encapsulation |
— |
|
PTP and SyncE support on breakout ports for N540-24Q8L2DD-SYS and N540X-16Z4G8Q2C-A/D Routers |
— |
|
PTP Profiles Support for N540-6Z14S-SYS-D |
— |
|
PTP Profiles Support for N540-24Q8L2DD-SYS |
— |
|
PTP Profiles Support for N540X-16Z4G8Q2C-A/D |
— |
|
Assisted Partial Timing Support |
— |
|
PTP Holdover Traceability Suppression for T-GM and T-GM with VP/APTS modes |
— |
|
Support for Frequency Synchronization on the Cisco N560-IMA8Q interface module |
— |
|
Assisted Partial Timing Support on this routers |
— |