The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix provides information about the product IDs for components of the Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Enhanced router.
The tables list the components that make up the routing system, their product IDs (the part numbers to use to order the components), and descriptions.
![]() Note | Although this appendix provides product IDs for routing system components, the Cisco online ordering and pricing tool has the most up-to-date information on the routing system and product IDs. You can access the ordering tool at the following URL (CCO login required), and enter a search term such as “CRS” to view a list of components: http://www.cisco.com/cgi-bin/front.x/pricing |
The following table lists the product IDs for components in the Cisco CRS 8-Slot Line Card Chassis Enhanced router.
Component |
Product ID |
Description |
||
---|---|---|---|---|
CRS 8-slot routing system |
CRS-8/S |
Cisco CRS 8-slot routing system |
||
Cisco CRS 8-Slot Line Card Chassis Enhanced router |
CRS-8-LCC(=) |
Cisco CRS 8-Slot Line Card Chassis Enhanced router (spare chassis) |
||
Fan tray |
CRS-8-LCC-FAN-TR(=) CRS-8-FANTRAY-B |
Cisco CRS 8-slot fan tray and fans (spare)(2 required for each chassis) |
||
Air filter |
CRS-8-LCC-FILTER(=) |
Line card chassis filter pack (spare) |
||
Inlet grille |
CRS-8-FRNT-GRILL(=) CRS-8-PW-GRILL(=) |
Line card chassis inlet air grille—modular configuration power |
||
Installation kit |
CRS-8-INSTALL-KT(=) |
Line card chassis installation kit(includes a set of horizontal shelf brackets, mounting screws, and other items) |
||
Modular Configuration Power Components |
||||
AC power components, single-phase |
||||
AC power shelf |
CRS-8-PSH-AC(=) |
Cisco CRS 8-Slot Line Card Chassis Enhanced router single-phase AC power shelf(two required for each chassis) |
||
AC PM |
CRS-PM-AC(=) |
|
||
DC power components |
||||
DC power shelf |
CRS-8-PSH-DC(=) |
Cisco CRS 8-Slot Line Card Chassis Enhanced routerDC power shelf (two required for each chassis) |
||
DC PM |
CRS-PM-DC(=) |
Cisco CRS 8-Slot Line Card Chassis Enhanced router DC PM(up to four required for each power shelf) |
||
Switch fabric cards |
||||
Switch fabric cards |
CRS-8-FC/S(=) CRS-8-FC140/S(=) CRS-8-FC400/S (=) (400G) |
Cisco CRS 8-Slot Line Card Chassis Enhanced router switch fabric card (half-height)(four required for each chassis) |
||
Switch fabric blank |
CRS-8-FC-BLANK(=) |
Blank card carrier for each switch fabric slot (used during shipment, must be replaced by a switch fabric card) |
||
Switch fabric handle |
CRS-8-FC-HANDLE(=) |
Handle for carrying card (spare) |
||
Route processor card |
||||
|
CRS-8-RP(=) |
Cisco CRS 8-Slot Line Card Chassis Enhanced router RP card(one required for each chassis; for redundant operation, you also need CRS-8-RP/R=) |
||
Route processor, redundant |
CRS-8-RP/R(=) |
Optional route processor for redundant RP operation(one required for each Cisco CRS 8-Slot Line Card Chassis Enhanced router, along with CRS-8-RP=) |
||
Route processor memory |
CRS-MEM-2G(=)CRS-MEM-4G(=) |
RP memory module, 2 gigabytesRP memory module, 4 gigabytes |
||
Route processor blank |
CRS-8-RP-BLANK(=) |
Blank card carrier for each route processor slot(used during shipment, must be replaced by a route processor card) |
||
|
CRS-8-PRP-6G(=) CRS-8-PRP-12G(=) |
Cisco CRS 8-Slot Line Card Chassis Enhanced router performance route processor card |
||
Route processor handle |
CRS-8-RP-HANDLE(=) |
Handle for carrying card (spare) |
The following table list the product IDs for the modular services cards (MSCs) available for the Cisco CRS 8-Slot Line Card Chassis Enhanced router.
Component |
Product ID |
Description |
||
---|---|---|---|---|
MSC
FP card |
CRS-MSC-B(=),CRS-MSC-140G(=)CRS-MSC-X (400G)
FP40FP-140CRS-FP-X (400G) |
Cisco CRS Layer 3 modular service card (every MSC must have an associated PLIM) Cisco CRS Layer 3 forwarding processor(every FP must have an associated PLIM) |
||
MSC impedance carrier |
CRS-MSC-IMPEDANCE(=) |
Blank card carrier for each empty MSC slot (required for EMI compliance and cooling) |
![]() Note | For a complete list of PLIM product IDs, see the Cisco CRS Carrier Routing System Ethernet Physical Layer Interface Module Installation Note. |
The following table list the physical layer interface modules (PLIMs) available for the Cisco CRS 8-Slot Line Card Chassis Enhanced router.
Component |
Product ID |
Description |
---|---|---|
1xOC-768 PLIM |
1OC768-POS-SR(=) |
1-port OC-768c/STM-256c PLIM, with short-reach optics (POS) |
4xOC-192 PLIM |
4OC192-POS/DPT-LR(=) |
4-port OC-192c/STM-64c PLIM, with long-reach optics (POS or DPT) |
4OC192-POS/DPT-IR(=) |
4-port OC-192c/STM-64c PLIM, with intermediate-reach optics (POS or DPT) |
|
4OC192-POS/DPT-SR(=) |
4-port OC-192c/STM-64c PLIM, withshort-reach optics (POS or DPT) |
|
4OC192-POS/DPT-VS(=) |
4-port OC-192c/STM-64c PLIM, with very-short-reach optics (POS or DPT) |
|
16xOC-48 PLIM |
16OC48-POS/DPT(=) POM-OC48-LR2-LC-C(=)POM-OC48-SR-LC-C(=) |
OC-48c/STM-16c PLIM, uses small form-factor pluggable (SFP) modules (POS or DPT) The PLIM uses 1 to 16 single-mode, long- and short-reach optic modules (mixing allowed): |
8x10-GE XENPAK PLIM |
8-10GBE(=) CRS-XENPAK10GB-LR(=) |
10-GE PLIM, uses XENPAK optic modules. The PLIM uses 1 to 8 single-mode, long-reachoptic modules: Long-reach optics (CRS-XENPAK10GB-LR=) |
8x10-GE and 4x10-GE XFP PLIMs |
8-10GBE-WL-XFP(=) 4-10GBE-WL-XFP(=) |
10-GE PLIM, uses XFP optic modules. These PLIMs use 1 to 8 (or 1 to 4) single-mode, XFP optic modules. |
20x10-GE and 14x10-GE XFP PLIMs |
20X10GBE-WL-XFP 14X10GBE-WL-XFP |
10-GE PLIM, uses XFP optic modules. These PLIMs use 1 to 20 (or 1 to 14) single-mode, XFP optic modules. |
1x100-GE CFP PLIM |
1X100GBE(=) |
100-GE PLIM, uses one CFP optic module. |
PLIM impedance carrier |
CRS-INT-IMPEDANCE(=) |
Blank card carrier for each empty PLIM slot (required for EMI compliance and cooling) |
![]() Note | For a complete list of SIP and SPA product IDs, see the Cisco CRS SIP and SPA Hardware Installation Guide . |
Component |
Product ID |
Description |
---|---|---|
Cisco CRS SPA Interface Processor-800 |
CRS1-SIP-800 |
Occupies one PLIM slot on the Cisco CRS 8-Slot Line Card Chassis Enhanced router. Supports six normal-height SPAs or three double-height SPAs or any combination in between. |
1-Port OC-192c/ STM- 64 POS/RPR XFP SPA |
SPA-OC192POS-XFP |
— |
4-Port OC-3c/STM-1 POS SPA |
SPA-4XOC3-POS |
— |
8-Port OC-12c/STM-4 Multirate POS SPA |
SPA-8XOC12-POS |
— |
8-Port Gigabit Ethernet SPA |
SPA-8X1GE |
— |