Telemetry Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.4.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 16, 2020

Chapter: New and Changed Feature Information

New and Changed Feature Information
New and Changed Telemetry Features

New and Changed Feature Information

This section lists all the new and changed features for the Telemetry Configuration Guide for Cisco NCS 5000 Series Routers.

New and Changed Telemetry Features

Note

This software release has reached end-of-life status. For more information, see the End-of-Life and End-of-Sale Notices.


Feature	Description	Changed in Release	Where Documented
Support for telemetry dark bandwidth	Model-driven telemetry supports MPLS dark bandwidth with the polling interval reduced to 10 seconds. The dark bandwidth is the total interface bandwidth utilization in the data plane, excluding the RSVP-TE bandwidth.	Release 6.4.1	Configuring Automatic Bandwidth topic in Implementing MPLS Traffic Engineering chapter in MPLS Configuration Guide
Support for Event-driven telemetry through NETCONF notification for Link Layer Discovery Protocol (LLDP) events	NETCONF client is configured to receive event notifications from a NETCONF server through a subscription.	Release 6.4.1	Configure Model-driven Telemetry chapter - Example: Configure Event-driven Telemetry for LLDP

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)