L2VPN and Ethernet Services Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 27, 2018

New and Changed VPN Features

This table summarizes the new and changed feature information for the L2VPN and Ethernet Services Configuration Guide for Cisco NCS 5000 Series Routers, and tells you where they are documented.

New and Changed VPN Features

Table 1. VPN Features Added or Modified in IOS XR Release 6.3.x
Feature	Description	Changed in Release	Where Documented
Traffic Storm Control	Traffic Storm Control provides Layer 2 port security under a Virtual Private LAN Services (VPLS) bridge by preventing excess traffic from disrupting the bridge.	Release 6.3.1	Storm Control
Multiple Spanning Tree Protocol	The Multiple Spanning Tree Protocol (MSTP) is a Spanning Tree Protocol (STP) variant that allows multiple and independent spanning trees to be created over the same physical network.	Release 6.3.1	Configure Multiple Spanning Tree Protocol
L2VPN Autodiscovery and Signaling	L2VPN Autodiscovery and Signaling enables the discovery of remote Provider Edge (PE) routers and the associated signaling in order to provision the pseudowires	Release 6.3.1	Configure L2VPN Autodiscovery and Signaling

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)