Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 7.0.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 12, 2020

Chapter: New and Changed Feature Information

New and Changed Feature Information
Interface and Hardware Component Features Added or Modified in IOS XR Release 7.0.x

New and Changed Feature Information

This table summarizes the new and changed feature information for the Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, and tells you where they are documented.

Interface and Hardware Component Features Added or Modified in IOS XR Release 7.0.x


Feature	Description	Introduced/Changed in Release	Where Documented
Event-driven Telemetry Support	Provides support for Event-driven Telemetry Support on LLDP.	Release 7.0.1	Programmability Configuration Guide for Cisco NCS 5500 Series Routers
SPAN over Pseudo-Wire	Provides support for SPAN over Pseudo-Wire.	Release 7.0.2	For more information about the feature, see the Configuring Traffic Mirroring chapter in the Interface and Hardware Component Command Reference for Cisco NCS 5500 and NCS 540 and NCS 560 Series Routers .

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)