Skip to content
Skip to search
Skip to footer

IP Addresses and Services Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 13, 2017

Chapter: New and Changed IP Addresses and Services Features

New and Changed IP Addresses and Services Features
New and Changed IP Addresses and Services Features

New and Changed IP Addresses and Services Features

This table summarizes the new and changed feature information for the IP Addresses and Services Configuration Guide for Cisco NCS 5500 Series Routers, and tells you where they are documented.

New and Changed IP Addresses and Services Features

Table 1. New and Changed Features
Feature	Description	Introduced/Changed in Release	Where Documented
ABF with GRE Tunnel as Destination	This feature was introduced.	Release 6.2.2	Configuring ACL-based Forwarding
Packet Length Match	This feature was introduced	Release 6.2.2	Implementing Access Lists and Prefix Lists chapter: Configuring ACL Filtering by IP Packet Length For commands, see the Access List Commands chapter in IP Addresses and Services Command Reference for Cisco NCS 5500 Series and NCS 540 and NCS 560 Series Routers.
Fragment-offset Match	This feature was introduced	Release 6.2.2	Implementing Access Lists and Prefix Lists chapter: Matching by Fragment Offset in ACLs For commands, see the Access List Commands chapter in IP Addresses and Services Command Reference for Cisco NCS 5500 Series and NCS 540 and NCS 560 Series Routers.
Defining Dynamic LPTS Flow Type	This feature was introduced	Release 6.2.2	Implementing LPTS chapter For commands, see the LPTS Commands chapter in IP Addresses and Services Command Reference for Cisco NCS 5500 Series and NCS 540 and NCS 560 Series Routers.
Understanding and Configuring Object-Group ACLs	This feature was introduced	Release 6.2.2	See the Implementing Access Lists and Prefix Lists chapter: Understanding Object-Group ACLs, Configuring an Object-Group ACL, and Verifying Object-Group ACL Compression

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)