MPLS Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 29, 2018

New and Changed MPLS Features

This table summarizes the new and changed feature information for the MPLS Configuration Guide for the Cisco NCS 5500 Series Router and tells you where they are documented.

New and Changed MPLS Feature Information

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
Configuring MPLS Static over BVI	This feature was introduced.	Release 6.3.2	Configuring MPLS Static over BVI
Configuring Static LSP Next Hop Resolve with Recursive Prefix	This feature was introduced.	Release 6.3.2	Configuring Static LSP Next Hop Resolve with Recursive Prefix
Configuring MPLS-TE Path Protection	This feature was introduced.	Release 6.3.2	Configuring MPLS-TE Path Protection
LDP over MPLS-TE	This feature was introduced.	Release 6.3.2	Configuring LDP over MPLS-TE

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)