Multicast Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 7.4.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 1, 2020

Chapter: New and Changed Multicast Features

New and Changed Multicast Features
Multicast Features Added or Modified in IOS XR Release 7.4.x

New and Changed Multicast Features

This chapter lists all the features that have been added or modified in this guide. The table also contains references to these feature documentation sections.

Multicast Features Added or Modified in IOS XR Release 7.4.x

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
Support for Layer 2 Multicast	This feature is now supported on routers that have the Cisco NC57 line cards installed and operate in native and compatibility mode.	Release 7.4.1	Implementing IGMP Snooping
Configure MVPN using Draft-Rosen (Profile 0)	The feature was modified.	Release 7.4.1	Configure MVPN using Draft-Rosen (Profile 0)
Designated Router Election Using StickyDR	The feature was introduced.	Release 7.4.1	Designated Router Election Using StickyDR
YANG Data Models for Multicast Interface Counters	The feature was introduced.	Release 7.4.1	Configure Multicast Route Statistics

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)