New and Changed Segment Routing Features
Segment Routing Features Added or Modified in IOS XR Release 7.3.x
| Feature | Description | Introduced/Changed in Release | Where Documented |
|---|---|---|---|
|
Data Plane Validation for SR-MPLS IPv6-based Controller Instantiated LSPs |
You can now verify the network configuration and paths and policies set up, without interrupting or potentially disrupting live network traffic, for SR-MPLS (Segment Routing over Multiprotocol Label Switching) IPv6-based Label Switched Paths (LSPs). With this feature, you can validate controller instantiated LSPs programmed directly into the forwarding hardware. |
Release 7.3.6 |
|
|
BGP Best Path Computation using SR Policy Paths |
BGP selects the best path from the available pool of paths such as iBGP, eBGP, color, or noncolor paths with native next hop and SR policy next hop. BGP uses either native next hop or an SR policy next hop for best path computation. |
Release 7.3.4 |
|
|
Improved Segment List Information for Inactive or Invalid Policies |
This feature provides for displaying detailed segment list information, and also lists information on invalid and inactive policies. This allows you to determine if the policies have been received correctly, to the SR-TE policies with explicit path. |
Release 7.3.3 | |
|
Support for SRv6 Micro-Segments (uSID) and SRv6 Full-length Segments |
This release supports both SRv6 Micro SIDs (uSID) and SRv6 Base/Full-length SIDs. |
Release 7.3.2 |
Configure Segment Routing over IPv6 (SRv6) with Full-Length SIDs |
|
SRv6/MPLS L3 Service Interworking Gateway (SRv6 uSID) |
This feature is introduced. |
Release 7.3.2 | |
|
SRv6/MPLS L3 Service Interworking Gateway (SRv6 Full-Length SID) |
This feature is introduced. |
Release 7.3.2 | |
|
SRv6/MPLS Dual-Connected PE (SRv6 Full-Length SID) |
This feature is introduced. |
Release 7.3.2 | |
|
SRv6/MPLS Dual-Connected PE (SRv6 uSID) |
This feature is introduced. |
Release 7.3.2 | |
|
SRv6 Services: EVPN VPWS — All-Active Multi-Homing (SRv6 uSID) |
This feature is introduced. |
Release 7.3.2 | |
|
SRv6-Services: VPNv4/VPNv6 Dual-Stack Support |
This feature is introduced. |
Release 7.3.2 | |
|
Segment Routing Treetrace Enhancements |
This feature is introduced. |
Release 7.3.2 | |
|
SR-TE PCE Groups |
This feature is introduced. |
Release 7.3.2 | |
|
BGP PIC over SR-TE |
This feature is introduced. |
Release 7.3.2 | |
|
Microloop Avoidance for OSPF Flexible Algorithm |
This feature is introduced. |
Release 7.3.2 | |
|
Segment Routing Conditional Prefix Advertisement for OSPF |
This feature is introduced. |
Release 7.3.1 | |
|
Link Delay Measurement with IPv6 Link Local Address |
This feature is introduced. |
Release 7.3.1 | |
|
SRv6 Micro-Segment (uSID) |
This feature is introduced. |
Release 7.3.1 | |
|
SRv6 Services: IPv6 L3VPN |
This feature is introduced. |
Release 7.3.1 | |
|
SRv6 Services: BGP Global IPv6 |
This feature is introduced. |
Release 7.3.1 | |
|
Weighted Anycast SID-Aware Path Computation |
This feature is introduced. |
Release 7.3.1 | |
|
Prefer Manual Adj-SID in Path Calculation |
This feature is introduced. |
Release 7.3.1 | |
|
Multicast VPN: Tree-SID MVPN With TI-LFA |
This feature is introduced. |
Release 7.3.1 | |
|
SR Performance Measurement Named Profiles |
This feature is introduced. |
Release 7.3.1 | |
|
SR OAM for SR Policy (Policy Name / Binding SID / Custom label stack) |
This feature is introduced. |
Release 7.3.1 |
SR OAM for SR Policy (Policy Name / Binding SID / Custom label stack) |
|
Cumulative Metric Bounds (Delay-Bound Use-Case) |
This feature is introduced. |
Release 7.3.1 | |
|
SR-MPLS over GRE as TI-LFA Backup Path |
This feature is introduced. |
Release 7.3.1 |
Feedback