Implementing Performance Management

Performance management (PM) on the Cisco IOS XR Software provides a framework to perform these tasks:

  • Collect and export PM statistics to a TFTP server for data storage and retrieval

  • Monitor the system using extensible markup language (XML) queries

  • Configure threshold conditions that generate system logging messages when a threshold condition is matched.

The PM system collects data that is useful for graphing or charting system resource utilization, for capacity planning, for traffic engineering, and for trend analysis.


YANG Data Model

You can programmatically monitor the system resources using openconfig-system.yang OpenConfig data model. To get started with using data models, see the Programmability Configuration Guide for Cisco NCS 540 Series Routers.

Prerequisites for Implementing Performance Management

Before implementing performance management in your network operations center (NOC), ensure that these prerequisites are met:

  • You must install and activate the Package Installation Envelope (PIE) for the manageability software.

  • You must be in a user group associated with a task group that includes the proper task IDs. The command reference guides include the task IDs required for each command. If you suspect user group assignment is preventing you from using a command, contact your AAA administrator for assistance.

  • You must have connectivity with a TFTP server.

Information About Implementing Performance Management

PM Functional Overview

The Performance Management (PM) frameworks consists of two major components:

PM Statistics Server

The PM statistics server is the front end for statistic collections, entity instance monitoring collections, and threshold monitoring. All PM statistic collections and threshold conditions configured through the command-line interface (CLI) or through XML schemas are processed by the PM statistics server and distributed among the PM statistics collectors.

PM Statistics Collector

The PM statistics collector collects statistics from entity instances and stores that data in memory. The memory contents are checkpointed so that information is available across process restarts. In addition, the PM statistics collector is responsible for exporting operational data to the XML agent and to the TFTP server.

PM Component Communications illustrates the relationship between the components that constitute the PM system.

Figure 1. PM Component Communications
PM Component Communications

PM Benefits

The PM system provides these benefits:

  • Configurable data collection policies

  • Efficient transfer of statistical data in the binary format via TFTP

  • Entity instance monitoring support

  • Threshold monitoring support

  • Data persistency across process restarts and processor failovers

PM Statistics Collection Overview

A PM statistics collection first gathers statistics from all the attributes associated with all the instances of an entity in the PM system. It then exports the statistical data in the binary file format to a TFTP server. For example, a Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) statistics collection gathers statistical data from all the attributes associated with all MPLS LDP sessions on the router.

This table lists the entities and the associated instances in the PM system.

Table 1. Entity Classes and Associated Instances

Entity Classes

Instance

BGP

Neighbors or Peers

Interface Basic Counters

Interfaces

Interface Data Rates

Interfaces

Interface Generic Counters

Interfaces

MPLS LDP

LDP Sessions

Node CPU

Nodes

Node Memory

Nodes

Node Process

Processes

OSPFv2

Processes

OSPFv3

Processes


Note

For a list of all attributes associated with the entities that constitute the PM system, see Table 1.


Note

Based on the interface type, the interface either supports the interface generic counters or the interface basic counters. The interfaces that support the interface basic counters do not support the interface data rates.

Binary File Format for Exporting PM Statistics

This sample describes the binary file format: 



Version : 4 Bytes
NoOf Entities : 1 Byte  (e.g. . 4 )
Entity Identifier         : 1 Byte  (e.g NODE=1,Interface=2,BGP=3)
Options                    :2 Bytes 
NoOf SubEntities             :1 Byte  (2)
SubEntity Identifier     :1 Byte  (e.g BGP-PEERS )
Time Stamp 4 Bytes (Reference Time : Start Ref Time)
No Of Instances    :2 Byte  (e.g 100)
                   Key Instance   :Variable 
                        NoOfSamples: 1 Byte (e.g 10 Samples)
                           SampleNo : 1 Byte (e.g Sample No 1)
Time Stamp 4 Bytes (Sample Time)
                            StatCounterName :1 Byte (PeerSessionsEst=1)
                            StatCounterValue :8 Bytes ( for all counters)
                            Repeat for Each StatCounterName
                        Repeat for Each Sample No(Time Interval)
                Repeat for All Instances
        Repeat for All SubTypes
Repeat for All Entities

Binary File ID Assignments for Entity, Subentity, and StatsCounter Names

This table describes the assignment of various values and keys which is present in the binary file.

Table 2. Binary Format Values and Keys

Entity

Subentity

Key

StatsCounters

Node (1)

CPU (1)

CPU Key <Node ID>

See Table 2

Memory (2)

Memory Key <Node ID>

Process (3)

Node Process Key <NodeProcessID>

Interface (2)

Generic Counters (1)

Generic Counters Key <ifName>

Data Rate Counters (2)

Data Rate Counters Key <ifName>

Basic Counters (3)

Basic Counters Key <ifName>

BGP (3)

Peer (1)

Peer Key <IpAddress>

MPLS (4)

Reserved (1)

—

Reserved (2)

—

LDP (4)

LDP Session Key <IpAddress>

OSPF (5)

v2protocol (1)

Instance <process_instance>

v3protocol (2)

Instance <process_instance


Note

<ifName>—The length is variable. The first two bytes contain the size of the Instance ID; this is followed by the Instance ID string (that is, an Interface name).

<IpAddress>—4 bytes that contain the IP address.

<NodeProcessID>—64-bit Instance ID. The first 32 bits contain the node ID, and the second 32 bits contain the process ID.

<NodeID>—32-bit instance ID that contains the Node ID.

<process_instance>—The length is variable. The first two bytes contain the size of Instance ID followed by Instance ID string (that is, a process name).


Note

The numbers in parenthesis (the numbers that are associated with each entity and subentity in Table 1 ) denote the entity and subEntity IDs that are displayed in the TFTP File.

This table describes the supported statistics counters that are collected in the binary file for entities and subentities.

Table 3. Supported StatsCounters for Entities and Subentites

Entity

Subentity

StatsCounters

Node (1)

CPU (1)

NoProcesses

Memory (2)

CurrMemory, PeakMemory

Process (3)

PeakMemory, NoThreads

Interface (2)

Generic Counters (1)

InPackets, InOctets, OutPackets, OutOctets, InUcastPkts, InMulticastPkts, InBroadcastPkts, OutUcastPkts, OutMulticastPkts, OutBroadcastPkts, OutputTotalDrops, InputTotalDrops, InputQueueDrops, InputUnknownProto, OutputTotalErrors, OutputUnderrun, InputTotalErrors, InputCRC,InputOverrun, InputFrame

Data Rate Counters (2)

InputDataRate, InputPacketRate, OutputDataRate, OutputPacketRate, InputPeakRate, InputPeakPkts, OutputPeakRate, OutputPeakPkts, Bandwidth

Basic Counters

InPackets, InOctets, OutPackets, OutOctets, InputTotalDrops, InputQueueDrops,InputTotalErrors, OutputTotalErrors, OutputQueueDrops, OutputTotalErrors

BGP (3)

Peer (1)

InputMessages, OutputMessages, InputUpdateMessages, OutputUpdateMessages, ConnEstablished, ConnDropped, ErrorsReceived, ErrorsSent

MPLS (4)

LDP (4)

TotalMsgsSent, TotalMsgsRcvd, InitMsgsSent, InitMsgsRcvd, AddressMsgsSent, AddressMsgsRcvd, AddressWithdrawMsgsSent, AddressWithdrawMsgsRcvd, LabelMappingMsgsSent, LabelMappingMsgsRcvd, LabelWithdrawMsgsSent, LabelWithdrawMsgsRcvd, LabelReleaseMsgsSent, LabelReleaseMsgsRcvd, NotificationMsgsSent, NotificationMsgsRcvd KeepAliveMsgsSent, KeepAliveMsgsRcvd

OSPF (5)

v2protocol (1)

InputPackets, OutputPackets, InputHelloPackets, OutputHelloPackets, InputDBDs, InputDBDsLSA, OutputDBDs, OutputDBDsLSA, InputLSRequests, InputLSRequestsLSA, OutputLSRequests, OutputLSRequestsLSA, InputLSAUpdates, InputLSAUpdatesLSA, OutputLSAUpdates, OutputLSAUpdatesLSA, InputLSAAcks, InputLSAAcksLSA, OutputLSAAcks, OutputLSAAcksLSA, ChecksumErrors

v3protocol (2)

InputPackets, OutputPackets, InputHelloPackets, OutputHelloPackets, InputDBDs, InputDBDsLSA, OutputDBDs, OutputDBDsLSA, InputLSRequests, InputLSRequestsLSA, OutputLSRequests, OutputLSRequestsLSA, InputLSAUpdates, InputLSAUpdatesLSA, OutputLSAUpdates, OutputLSAUpdatesLSA, InputLSAAcks, InputLSAAcksLSA, OutputLSAAcks, OutputLSAAcksLSA

Filenaming Convention Applied to Binary Files

These filenaming convention is applied to PM statistics collections that are sent to the directory location configured on the TFTP server:

<LR_NAME>_<EntityName>_<SubentityName>_<TimeStamp>

How to Implement Performance Management

Configuring an External TFTP Server or Local Disk for PM Statistics Collection

You can export PM statistical data to an external TFTP server or dump the data to the local file system. Both the local and TFTP destinations are mutually exclusive and you can configure either one of them at a time.

Configuration Examples

This example configures an external TFTP server for PM statistics collection. 

RP/0/RP0/CPU0:Router# configure
RP/0/RP0/CPU0:Router(config)# performance-mgmt resources tftp-server 10.3.40.161 directory mypmdata/datafiles
RP/0/RP0/CPU0:Router(config)# commit

This example configures a local disk for PM statistics collection. 

RP/0/RP0/CPU0:Router# configure
RP/0/RP0/CPU0:Router(config)# performance-mgmt resources dump local
RP/0/RP0/CPU0:Router(config)# commit

Configuring PM Statistics Collection Templates

PM statistics collections are configured through PM statistics collection templates. A PM statistics collection template contains the entity, the sample interval, and the number of sampling operations to be performed before exporting the data to a TFTP server. When a PM statistics collection template is enabled, the PM statistics collection gathers statistics for all attributes from all instances associated with the entity configured in the template. You can define multiple templates for any given entity; however, only one PM statistics collection template for a given entity can be enabled at a time.

Guidelines for Configuring PM Statistics Collection Templates

When creating PM statistics collection templates, follow these guidelines:

  • You must configure a TFTP server resource or local dump resource if you want to export statistics data onto a remote TFTP server or local disk.

  • You can define multiple templates for any given entity, but at a time you can enable only one PM statistics collection template for a given entity.
  • When configuring a template, you can designate the template for the entity as the default template using the default keyword or name the template. The default template contains the following default values:
    • A sample interval of 10 minutes.
    • A sample size of five sampling operations.
  • The sample interval sets the frequency of the sampling operations performed during the sampling cycle. You can configure the sample interval with the sample-interval command. The range is from 1 to 60 minutes.

  • The sample size sets the number of sampling operations to be performed before exporting the data to the TFTP server. You can configure the sample size with the sample-size command. The range is from 1 to 60 samples.


    Note

    Specifying a small sample interval increases CPU utilization, whereas specifying a large sample size increases memory utilization. The sample size and sample interval, therefore, may need to be adjusted to prevent system overload.

  • The export cycle determines how often PM statistics collection data is exported to the TFTP server. The export cycle can be calculated by multiplying the sample interval and sample size (sample interval x sample size = export cycle).

  • Once a template has been enabled, the sampling and export cycles continue until the template is disabled with the no form of the performance-mgmt apply statistics command.

  • You must specify either a node with the location command or enable the PM statistic collections for all nodes using the location all command when enabling or disabling a PM statistic collections for the following entities:
    • Node CPU
    • Node memory
    • Node process

Configuration Example

This example shows how to create and enable a PM statistics collection template. 

RP/0/RP0/CPU0:Router# configure
RP/0/RP0/CPU0:Router(config)# performance-mgmt statistics interface generic-counters template template 1 
RP/0/RP0/CPU0:Router(config)# performance-mgmt statistics interface generic-counters template 1 sample-size 10 
RP/0/RP0/CPU0:Router(config)# performance-mgmt statistics interface generic-counters template 1 sample-interval 5
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply statistics interface generic-counters 1 
RP/0/RP0/CPU0:Router# commit

Enabling PM Entity Instance Monitoring

Entity instance monitoring gathers statistics from attributes associated with a specific entity instance. When an entity instance is enabled for monitoring, the PM system gathers statistics from only attributes associated with the specified entity instance. The PM system uses the sampling cycle that is configured in the PM statistics collection template for the entity being monitored. Entity instance monitoring, however, is a separate process from that of the PM statistics collection; therefore, it does not interfere with PM statistics collection. Furthermore, the data from entity instance monitoring collection is independent of PM statistics collection. Unlike PM statistics collection, the data from entity instance monitoring is not exported to the TFTP server. For more information about all the attributes associated with each entity instance and commands, see Performance Management: Details.

Configuration Example

This example shows how to enable entity instance monitoring for a node CPU entity instance. 

RP/0/RP0/CPU0:Router# configure
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply monitor node cpu location 0/RP0/CPU0 default
RP/0/RP0/CPU0:Router(config)# commit

Configuring PM Threshold Monitoring Templates

The PM system supports the configuration of threshold conditions to monitor an attribute (or attributes) for threshold violations. Threshold conditions are configured through PM threshold monitoring templates. When a PM threshold template is enabled, the PM system monitors all instances of the attribute (or attributes) for the threshold condition configured in the template. If at end of the sample interval a threshold condition is matched, the PM system generates a system logging message for each instance that matches the threshold condition. For the list of attributes and value ranges associated with each attribute for all the entities, see Performance Management: Details

Guidelines for Configuring PM Threshold Monitoring Templates

While you configure PM threshold monitoring templates, follow these guidelines:

  • Once a template has been enabled, the threshold monitoring continues until the template is disabled with the no form of the performance-mgmt apply thresholds command.

  • Only one PM threshold template for an entity can be enabled at a time.

  • You must specify either a node with the location command or enable the PM statistic collections for all nodes using the location all command when enabling or disabling a PM threshold monitoring template for the following entities:
    • Node CPU
    • Node memory
    • Node process

  • You can monitor the comparison of current and previous values of a data metric by enabling the delta option in the performance-mgmt thresholds command.


Note

The argument delta was introduced in the performance-mgmt thresholds command in Cisco IOS XR software release 7.7.1.

Configuration Example

This example shows how to create and enable a PM threshold monitoring template. In this example, a PM threshold template is created for the CurrMemory attribute of the node memory entity. The threshold condition in this PM threshold condition monitors the CurrMemory attribute to determine whether the current memory use is greater than 50 percent. 


Router# conf t
Router(config)# performance-mgmt thresholds node memory template template20
Router(config-threshold-cpu)# CurrMemory gt 50 percent
Router(config-threshold-cpu)# sample-interval 5
Router(config-threshold-cpu)# exit
Router(config)# performance-mgmt apply thresholds node memory location 0/RP0/CPU0 template20
Router(config)# commit

This example shows how to create a template for monitoring interface generic counters. The template named ge_delta is configured to check if the value of InPackets counter exceeds 10, considering the difference delta between the current and previous values. The purpose is to trigger an alarm when the threshold is crossed. This allows for monitoring and tracking any significant changes in the incoming packet count on the interface.

By using these threshold templates, you can actively monitor various aspects of your network performance.


RP/0/0/CPU0:ios(config)#performance-mgmt thresholds interface generic-counters template ge_delta InPackets ge 10 delta
RP/0/0/CPU0:ios(config)#commit

performance-mgmt thresholds bgp template bgp_delta
 ConnEstablished ge 10 delta
!
performance-mgmt thresholds mpls ldp template mpls_delta
 InitMsgsRcvd ge 10 delta
!
performance-mgmt thresholds node cpu template cpu_delta
 AverageCpuUsed ge 10 delta
!
performance-mgmt thresholds interface generic-counters template default
 InPackets ge 10 delta
!
performance-mgmt thresholds interface basic-counters template basic_delta
 InPackets ge 10 delta
!
performance-mgmt thresholds interface data-rates template data_delta
 Bandwidth ge 10 delta
!
performance-mgmt thresholds node memory template memory_delta
 CurrMemory ge 10 delta
!
performance-mgmt thresholds node process template process_delta
 AverageCPUUsed ge 10 delta
!
performance-mgmt thresholds ospf v2protocol template ospf_v2_delta
 ChecksumErrors ge 10 delta
!
performance-mgmt thresholds ospf v3protocol template ospf_v3_delta
 OutputPackets ge 10 delta
!
end

Configuring Instance Filtering by Regular Expression

This task explains defining a regular expression group which can be applied to one or more statistics or threshold templates. You can also include multiple regular expression indices. The benefits of instance filtering using the regular expression group is as follows.

  • You can use the same regular expression group that can be applied to multiple templates.

  • You can enhance flexibility by assigning the same index values.

  • You can enhance the performance by applying regular expressions, which has OR conditions.


Note

The Instance filtering by regular-expression is currently supported in interface entities only (Interface basic-counters, generic-counters, data-rates.

Configuration Example

This example shows how to define a regular expression group. 

RP/0/RP0/CPU0:Router# configure
RP/0/RP0/CPU0:Router(config)# performance-mgmt regular-expression regexp
RP/0/RP0/CPU0:Router(config-perfmgmt-regex)# index 10 match
RP/0/RP0/CPU0:Router(config)# commit

Performance Management: Details

This section contains additional information which will be useful while configuring performance management.

This table describes the attributes and value ranges associated with each attribute for all the entities that constitute the PM system.

Table 4. Attributes and Values

Entity

Attributes

Description

Values

bgp

ConnDropped

Number of times the connection was dropped.

Range is from 0 to 4294967295.

ConnEstablished

Number of times the connection was established.

Range is from 0 to 4294967295.

ErrorsReceived

Number of error notifications received on the connection.

Range is from 0 to 4294967295.

ErrorsSent

Number of error notifications sent on the connection.

Range is from 0 to 4294967295.

InputMessages

Number of messages received.

Range is from 0 to 4294967295.

InputUpdateMessages

Number of update messages received.

Range is from 0 to 4294967295.

OutputMessages

Number of messages sent.

Range is from 0 to 4294967295.

OutputUpdateMessages

Number of update messages sent.

Range is from 0 to 4294967295.

interface data-rates

Bandwidth

Bandwidth in kbps.

Range is from 0 to 4294967295.

InputDataRate

Input data rate in kbps.

Range is from 0 to 4294967295.

InputPacketRate

Input packets per second.

Range is from 0 to 4294967295.

InputPeakRate

Peak input data rate.

Range is from 0 to 4294967295.

InputPeakPkts

Peak input packet rate.

Range is from 0 to 4294967295.

OutputDataRate

Output data rate in kbps.

Range is from 0 to 4294967295.

OutputPacketRate

Output packets per second.

Range is from 0 to 4294967295.

OutputPeakPkts

Peak output packet rate.

Range is from 0 to 4294967295.

OutputPeakRate

Peak output data rate.

Range is from 0 to 4294967295.

interface basic-counters

InPackets

Packets received.

Range is from 0 to 4294967295.

InOctets

Bytes received.

Range is from 0 to 4294967295.

OutPackets

Packets sent.

Range is from 0 to 4294967295.

OutOctets

Bytes sent.

Range is from 0 to 4294967295.

InputTotalDrops

Inbound correct packets discarded.

Range is from 0 to 4294967295.

InputQueueDrops

Input queue drops.

Range is from 0 to 4294967295.

InputTotalErrors

Inbound incorrect packets discarded.

Range is from 0 to 4294967295.

OutputTotalDrops

Outbound correct packets discarded.

Range is from 0 to 4294967295.

OutputQueueDrops

Output queue drops.

Range is from 0 to 4294967295.

OutputTotalErrors

Outbound incorrect packets discarded.

Range is from 0 to 4294967295.

interface generic-counters

InBroadcastPkts

Broadcast packets received.

Range is from 0 to 4294967295.

InMulticastPkts

Multicast packets received.

Range is from 0 to 4294967295.

InOctets

Bytes received.

Range is from 0 to 4294967295.

InPackets

Packets received.

Range is from 0 to 4294967295.

InputCRC

Inbound packets discarded with incorrect CRC.

Range is from 0 to 4294967295.

InputFrame

Inbound framing errors.

Range is from 0 to 4294967295.

InputOverrun

Input overruns.

Range is from 0 to 4294967295.

InputQueueDrops

Input queue drops.

Range is from 0 to 4294967295.

InputTotalDrops

Inbound correct packets discarded.

Range is from 0 to 4294967295.

InputTotalErrors

Inbound incorrect packets discarded.

Range is from 0 to 4294967295.

InUcastPkts

Unicast packets received.

Range is from 0 to 4294967295.

InputUnknownProto

Inbound packets discarded with unknown protocol.

Range is from 0 to 4294967295.

OutBroadcastPkts

Broadcast packets sent.

Range is from 0 to 4294967295.

OutMulticastPkts

Multicast packets sent.

Range is from 0 to 4294967295.

OutOctets

Bytes sent.

Range is from 0 to 4294967295.

OutPackets

Packets sent.

Range is from 0 to 4294967295.

OutputTotalDrops

Outbound correct packets discarded.

Range is from 0 to 4294967295.

OutputTotalErrors

Outbound incorrect packets discarded.

Range is from 0 to 4294967295.

OutUcastPkts

Unicast packets sent.

Range is from 0 to 4294967295.

OutputUnderrun

Output underruns.

Range is from 0 to 4294967295.

mpls ldp

AddressMsgsRcvd

Address messages received.

Range is from 0 to 4294967295.

AddressMsgsSent

Address messages sent.

Range is from 0 to 4294967295.

AddressWithdrawMsgsRcd

Address withdraw messages received.

Range is from 0 to 4294967295.

AddressWithdrawMsgsSent

Address withdraw messages sent.

Range is from 0 to 4294967295.

InitMsgsSent

Initial messages sent.

Range is from 0 to 4294967295.

InitMsgsRcvd

Initial messages received.

Range is from 0 to 4294967295.

KeepaliveMsgsRcvd

Keepalive messages received.

Range is from 0 to 4294967295.

KeepaliveMsgsSent

Keepalive messages sent.

Range is from 0 to 4294967295.

LabelMappingMsgsRcvd

Label mapping messages received.

Range is from 0 to 4294967295.

LabelMappingMsgsSent

Label mapping messages sent.

Range is from 0 to 4294967295.

LabelReleaseMsgsRcvd

Label release messages received.

Range is from 0 to 4294967295.

LabelReleaseMsgsSent

Label release messages sent.

Range is from 0 to 4294967295.

LabelWithdrawMsgsRcvd

Label withdraw messages received.

Range is from 0 to 4294967295.

LabelWithdrawMsgsSent

Label withdraw messages sent.

Range is from 0 to 4294967295.

NotificationMsgsRcvd

Notification messages received.

Range is from 0 to 4294967295.

NotificationMsgsSent

Notification messages sent.

Range is from 0 to 4294967295.

TotalMsgsRcvd

Total messages received.

Range is from 0 to 4294967295.

TotalMsgsSent

Total messages sent.

Range is from 0 to 4294967295.

node cpu

NoProcesses

Number of processes.

Range is from 0 to 4294967295.

node memory

CurrMemory

Current application memory (in bytes) in use.

Range is from 0 to 4294967295.

PeakMemory

Maximum system memory (in MB) used since bootup.

Range is from 0 to 4194304.

node process

NoThreads

Number of threads.

Range is from 0 to 4294967295.

PeakMemory

Maximum dynamic memory (in KB) used since startup time.

Range is from 0 to 4194304.

ospf v2protocol

InputPackets

Total number of packets received.

Range is from 0 to 4294967295.

OutputPackets

Total number of packets sent.

Range is from 0 to 4294967295.

InputHelloPackets

Number of Hello packets received.

Range is from 0 to 4294967295.

OutputHelloPackets

Number of Hello packets sent.

Range is from 0 to 4294967295.

InputDBDs

Number of DBD packets received.

Range is from 0 to 4294967295.

InputDBDsLSA

Number of LSA received in DBD packets.

Range is from 0 to 4294967295.

OutputDBDs

Number of DBD packets sent.

Range is from 0 to 4294967295.

OutputDBDsLSA

Number of LSA sent in DBD packets.

Range is from 0 to 4294967295.

InputLSRequests

Number of LS requests received.

Range is from 0 to 4294967295.

InputLSRequestsLSA

Number of LSA received in LS requests.

Range is from 0 to 4294967295.

OutputLSRequests

Number of LS requests sent.

Range is from 0 to 4294967295.

OutputLSRequestsLSA

Number of LSA sent in LS requests.

Range is from 0 to 4294967295.

InputLSAUpdates

Number of LSA updates received.

Range is from 0 to 4294967295.

InputLSAUpdatesLSA

Number of LSA received in LSA updates.

Range is from 0 to 4294967295.

OutputLSAUpdates

Number of LSA updates sent.

Range is from 0 to 4294967295.

OutputLSAUpdatesLSA

Number of LSA sent in LSA updates.

Range is from 0 to 4294967295.

InputLSAAcks

Number of LSA acknowledgements received.

Range is from 0 to 4294967295.

InputLSAAcksLSA

Number of LSA received in LSA acknowledgements.

Range is from 0 to 4294967295.

OutputLSAAcks

Number of LSA acknowledgements sent

Range is from 0 to 4294967295.

OutputLSAAcksLSA

Number of LSA sent in LSA acknowledgements.

Range is from 0 to 4294967295.

ChecksumErrors

Number of packets received with checksum errors.

Range is from 0 to 4294967295.

ospf v3protocol

InputPackets

Total number of packets received.

Range is from 0 to 4294967295.

OutputPackets

Total number of packets sent.

Range is from 0 to 4294967295.

InputHelloPackets

Number of Hello packets received.

Range is from 0 to 4294967295.

OutputHelloPackets

Number of Hello packets sent.

Range is from 0 to 4294967295.

InputDBDs

Number of DBD packets received.

Range is from 0 to 4294967295.

InputDBDsLSA

Number of LSA received in DBD packets.

Range is from 0 to 4294967295.

OutputDBDs

Number of DBD packets sent.

Range is from 0 to 4294967295.

OutputDBDsLSA

Number of LSA sent in DBD packets.

Range is from 0 to 4294967295.

InputLSRequests

Number of LS requests received.

Range is from 0 to 4294967295.

InputLSRequestsLSA

Number of LSA received in LS requests.

Range is from 0 to 4294967295.

OutputLSRequests

Number of LS requests sent.

Range is from 0 to 4294967295.

OutputLSRequestsLSA

Number of LSA sent in LS requests.

Range is from 0 to 4294967295.

InputLSAUpdates

Number of LSA updates received.

Range is from 0 to 4294967295.

InputLSRequestsLSA

Number of LSA received in LS requests.

Range is from 0 to 4294967295.

OutputLSAUpdates

Number of LSA updates sent.

Range is from 0 to 4294967295.

OutputLSAUpdatesLSA

Number of LSA sent in LSA updates.

Range is from 0 to 4294967295.

InputLSAAcks

Number of LSA acknowledgements received.

Range is from 0 to 4294967295.

InputLSAAcksLSA

Number of LSA received in LSA acknowledgements.

Range is from 0 to 4294967295.

OutputLSAAcks

Number of LSA acknowledgements sent

Range is from 0 to 4294967295.

OutputLSAAcksLSA

Number of LSA sent in LSA acknowledgements.

Range is from 0 to 4294967295.

This table describes the commands used to enable entity instance monitoring for different entity instances.

Table 5. Entity Instances and Monitoring Commands

Entity

Command Description

BGP

Use the performance-mgmt apply monitor bgp command to enable entity instance monitoring for a BGP entity instance.

Syntax: 

                      performance-mgmt
                         apply monitor
                         bgp 
                         ip-address
                         template-name | default} 
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply monitor bgp 10.12.0.4 default

Interface Data Rates

Use the performance-mgmt apply monitor data-rates command to enable entity instance monitoring for an interface data rates entity instance.

Syntax: 

                        performance-mgmt
                           apply
                           monitor
                           interface
                           data-rates
                           type
                           interface-path-id {template-name |
                           default} 
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply monitor interface data-rates
 HundredGigE 0/0/1/0 default

Interface Basic Counters

Use the performance-mgmt apply monitor interface basic-counters command to enable entity instance monitoring for an interface basic counters entity instance.

Syntax: 
performance-mgmt
                           apply
                           monitor
                           interface
                           basic-counters
                           type
                           interface-path-id {template-name |
                           default} 
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply monitor interface basic-counters 
HundredGigE 0/0/1/0 default

Interface Generic Counters

Use the performance-mgmt apply monitor interface generic-counters command to enable entity instance monitoring for an interface generic counters entity instance.

Syntax: 

                        performance-mgmt
                           apply
                           monitor
                           interface
                           generic-counters
                           type
                           interface-path-id {template-name |
                           default}  
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply monitor interface generic-counters
 HundredGigE 0/0/1/0 default

MPLS LDP

Use the performance-mgmt apply monitor mpls ldp command to enable entity instance monitoring for an MPLS LDP entity instance.

Syntax: 

                        performance-mgmt
                           apply monitor
                           mpls
                           ldp
                           ip-address {template-name |
                        default}  
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply monitor mpls ldp 10.34.64.154 default

Node CPU

Use the performance-mgmt apply monitor node cpu command to enable entity instance monitoring for a node CPU entity instance.

Syntax: 

                        performance-mgmt
                           apply
                           monitor
                           node
                           cpu
                           location
                           node-id {template-name |
                        default}  
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply 
monitor node cpu location 0/RP0/CPU0 default

Node Memory

Use the performance-mgmt apply monitor node memory command to enable entity instance monitoring for a node memory entity instance.

Syntax: 

                        performance-mgmt
                           apply
                           monitor
                           node
                           memory
                           location
                           node-id {template-name |
                        default}  
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply 
monitor node memory location 0/RP0/CPU0 default

Node Process

Use the performance-mgmt apply monitor node process command to enable entity instance monitoring collection for a node process entity instance.

Syntax: 

                        performance-mgmt
                           apply monitor node
                           process
                           location
                           node-id
                           pid {template-name | default} 
                           
RP/0/RP0/CPU0:Router(config)# performance-mgmt apply 
monitor node process location p 0/RP0/CPU0 process 275 default

Verifying Performance Management

Use the following show commands to view the performance management details.

RP/0/RP0/CPU0:router show performance-mgmt monitor bgp 10.12.0.4 all-samples
RP/0/RP0/CPU0:router show performance-mgmt monitor interface data-rates gig0/0/0/0 all-samples

RP/0/RP0/CPU0:router show performance-mgmt monitor node memory location 0/RP0/CPU all-samples
Thu Apr 16 13:22:57.330 UTC
Node     : 0/RP0/CPU0
Sample No: 1   (Thu Apr 16 13:22:54 2020 UTC)
-------------------------------------------------------------------------------
CurrMemory: 3852800000            PeakMemory: 0

RP/0/RP0/CPU0:router show performance-mgmt monitor node process location 0/RP0/CP0 process 230 all-samples