- Preface
- Installation Roadmap
- Overview
- Installing the Power Enclosure, Power Trays, and Exterior Cosmetics
- Installing the Power Components
- Installing the Shelf Controller Cards and Fabric Cards
- Removing and Replacing Chassis Components
- System Specifications
- System Product IDs
- Cabling a Multi-Chassis Configuration
Preface
This document describes how to install a Cisco Network Convergence System (NCS) 6000 Fabric Card Chassis and its components. The Cisco NCS 6000 Fabric Card Chassis (FCC) is a product in the Cisco Network Convergence System 6000 Series family. The chassis specifications are included in Appendix A “System Specifications.” The Cisco product IDs (PIDs) are listed in Appendix B “System Product IDs.”
- Audience
- Documentation Conventions
- Related Documentation
- Changes to This Document
- Obtaining Documentation and Submitting a Service Request
Audience
This guide is intended for chassis installers and Cisco installation partners who are responsible for installing the Cisco NCS 6000 FCC and its components. The installers are expected to have installed networking hardware in the past. No additional knowledge of routing or the Cisco IOS XR software is assumed.
Documentation Conventions
This document uses the following conventions:
Convention | Description |
---|---|
bold font |
Commands and keywords and user-entered text appear in bold font. |
Italic font |
Document titles, new or emphasized terms, and arguments for which you supply values are in italic font. |
[ ] |
Elements in square brackets are optional. |
{x | y | z} |
Required alternative keywords are grouped in braces and separated by vertical bars. |
[x | y | z] |
Optional alternative keywords are grouped in brackets and separated by vertical bars. |
string |
A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks. |
courier font |
Terminal sessions and information the system displays appear in courier font. |
|
Indicates a variable for which you supply values, in context where italics cannot be used. |
< > |
Nonprinting characters such as passwords are in angle brackets. |
[ ] |
Default responses to system prompts are in square brackets. |
!, # |
An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. |
Note | Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual. |
Tip | Means the following information will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information, similar to a Timesaver. |
Caution | Means reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data. |
Warning | IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. SAVE THESE INSTRUCTIONS |
Warning | Statements using this symbol are provided for additional information and to comply with regulatory and customer requirements. |
Related Documentation
For complete planning, installation, and configuration information, see the following documents that are available on Cisco.com at the following URL: http://www.cisco.com/c/en/us/support/routers/network-convergence-system-6000-series-router/products-installation-guides-list.html.
-
Cisco Network Convergence System 6000 Series Routers Site Planning Guide
-
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
-
Cisco Network Convergence System 6000 Series Routers Hardware Installation Guide
-
Regulatory Compliance and Safety Information for the Cisco Network Convergence System 6000 Series Routers
Changes to This Document
Date | Summary |
---|---|
January 2018 |
Added support for the 2nd generation S2 fabric card (NCS-F-FC2) and CXP2 optics modules (ONS-CXP2-SR25). |
September 2014 |
Added Telercordia GR-63 requirements for air filter and other minor updates. |
July 2014 |
This document introduces the Cisco NCS 6000 Fabric Card Chassis. |
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation, at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.
Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service, and Cisco currently supports RSS Version 2.0.