List of Variables Used in CSP 2100 Sample Files

To create the user-data file, to configure the ESC you must have values ready for the following list of variables used in the sample files:

Table 1. List of Variables

Variable Name

Purpose

VAR_TIMEZONE

The timezone for the ESC clock to use

VAR_SERVICE_NAME

The name of the ESC service on the CSP

VAR_NTP_SERVER

The IP address of an NTP server

VAR_NETWORK1_NETMASK

The netmask for the eth1 interface (Dual Interface ESC)

VAR_NETWORK1_NAME

The name of the network on the CSP where ESC's eth1 interface exists (Dual Interface ESC)

VAR_NETWORK1_IPADDR

The IP address for the eth1 interface (Dual Interface ESC)

VAR_NETWORK1_GATEWAY

The gateway for the eth1 interface (Dual Interface ESC)

VAR_NETWORK0_NETMASK

The netmask for the eth0 interface

VAR_NETWORK0_NAME

The name of the network on the CSP where ESC's eth0 interface exists

VAR_NETWORK0_KADVRI

The VRRP ID used for HA. Must be unique in the subnet for the HA pair and the same value used on both ESCs

Range is from 1 to 254

VAR_NETWORK0_KADVIP

The VIP for the HA pair that connects to the current Active ESC

VAR_NETWORK0_IPADDR2

The IP address for the other ESC's eth0 interface

VAR_NETWORK0_IPADDR

The IP address for ESC (eth0 interface)

VAR_NETWORK0_GATEWAY

The gateway for the eth0 interface

VAR_NAMESERVER_IP

The IP address of a DNS server

VAR_LOCAL_HOSTNAME

The hostname for ESC

CSP_IP_ADDRESS

IP address of the CSP 2100 to be used