- Index
- About This Guide
- Introduction to the PRIME Fulfillment API
- Getting Started
- Common APIs
- Using Templates
- Monitoring APIs
- MPLS Provisioning
- VPLS Provisioning
- FlexUNI/EVC Provisioning
- Traffic Engineering Management Provisioning
- IP RAN Provisioning
- MPLS-TP Provisioning
- GUI to API Mapping
- Implementing a Notification Server
- Scripts
- Prime Fulfillment XDE SDK
- EVC Service Definitions
- Overview
- End-To-End Wires
- Service Request Examples
- Local Connect Service Request
- Pseudowire Service Request
- VPLS Service Request
- Modifying a EVC Service Request
- Creating Access Ring with two NPEs
- Creating NPC
- Configuring an SVI/EVC Hybrid Scenario Service Request
- Specifying Service Instance Name for EVC Service Requests
- Creating a Local Connect Service Request for IOS-XR using Bridge Domain
- Creating a Pseudowire Service Request with P2P E-line Name
- Creating a Local Connect Service Request with ATM Ethernet
- Creating a Pseudowire Service Request with ATM Ethernet
- Creating a VPLS Service Request with IOS XR
EVC Provisioning
This chapter describes the provisioning support for EVC (flexible user network interface/Ethernet Virtual Circuit) provided in Cisco Prime Fulfillment.
The following EVC support is available:
•
Allow the "service designers" plan the services that are specific to the services offered through a new type of policy - "EVC Policy". This single policy will be flexible enough to cater to different service offerings using EVC architecture
•Allow service designers to utilize most of the EVC features in a flexible manner, nearly matching the hardware/platform flexibilities
•Allow operators deploy services as per the EVC policies created by creating Service Requests (SRs).
Note that CE devices are not supported.
To provision EVC using Prime Fulfillment APIs, you need an EVC service definition and an EVC service request. The service definition specifies the core type, policy subtype, and common device properties. The service request defines the service definition to use, VPNs, attributes for each interface in the EVC link, and template information.
This chapter describes EVC service concepts and the steps required to provision EVC services using the Prime Fulfillment API. The provisioning example includes all steps from creating the inventory to auditing the service deployment.
For a detailed description of supported EVC features, policy attribute definitions, GUI implementation, and other information, see the Cisco Prime Fulfillment User Guide 6.2.
This chapter contains the following sections:
•End-to-End Provisioning Process.
EVC Service Definitions
A EVC service definition specifies the core type, policy subtype, and the attributes common to all EVC attachment circuits.
This section lists the supported service definitions, service orders, and policies and includes corresponding examples.
To provision EVC using Prime Fulfillment API, an EVC service policy and an EVC service request are required and only one subtype will be defined and of type EVC.
The EVC service policy/service definition specifies the attributes related to the end-to-end EVC links and non-EVC links. The service request defines the device interfaces for each EVC/non-EVC link connection and can optionally override policy attributes in each of the corresponding links.
When you deploy an EVC service request using a service order, the attributes specified in the service definition are applied to the devices and interfaces listed in the service request, along with the attributes for each of the EVC/non-EVC links.
Supported Service Definitions and Service Orders
Prime Fulfillment supports the following EVC features:
•Creating:
–EVC Service Definition/Policy
–EVC Service Order/Request
•Modifying:
–EVC Service Definition
–EVC Service Order/Request
•Deleting:
–EVC Service Definition/Policy
–EVC Service Order/Request
•Viewing:
–EVC Service Definition
–EVC Service Request
The above operations are supported for policies and service requests, which are created to provision a variety of network configurations.
Template-based support is available for EVC Policy and service requests.
Policy Types
For EVC, the following policy types are supported:
•Ethernet—Ethernet to Ethernet services can be configured using this policy type.
•ATM-Ethernet interworking—ATM to Ethernet services can be configured using this policy type. This new policy type is depicted in two of the policy XML examples.
MPLS Core Connectivity Types
There are three MPLS core connectivity types:
•PSEUDOWIRE—Allows connectivity between two N-PEs across the MPLS core.
This option does not limit the service to point-to-point (E-Line). This is because even with the PSEUDOWIRE option selected, multiple CEs can still be connected to a bridge domain on one or both sides of the pseudowire.
•VPLS—Allows connectivity between multiple N-PEs across the MPLS core.
There is no limit on the number of N-PEs across the MPLS core within a service request. However, many service requests can refer to the same customer-associated VPN.
•LOCAL—For local connect cases in which no connectivity is required across the MPLS core.
In the following, policy examples are given for each of these connectivity types.
Policy Examples
The following constitute XML policy examples for the three connectivity types that are supported across the MPLS core:
•Create Local Connect Policy with ATM/Ethernet internetworking
•Create Pseudowire Policy with ATM/Ethernet Internetworking
•Configuring an SVI/EVC Hybrid Scenario
•Policy for Specifying Service Instance Name for EVC Service Requests
Local Connect Policy
In this example, a EVC policy is created using local connect.
Example: CreateEVCServiceDefn_LOCAL.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinition</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Name</name>
<value xsi:type="xsd:string">doc_local</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinitionDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SubType</name>
<value xsi:type="xsd:string">Evc</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AccessType</name>
<value xsi:type="xsd:string">ETHERNET</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TransportType</name>
<value xsi:type="xsd:string">LOCAL</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniProtocolTunneling</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniKeepAlive</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniSpeed</name>
<value xsi:type="xsd:string">100</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniDuplex</name>
<value xsi:type="xsd:string">Half</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseExistingACLName</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanTranslationType</name>
<value xsi:type="xsd:string">NONE</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanTranslationNode</name>
<value xsi:type="xsd:string">AUTO</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DirectConnect</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBDVlanId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EnablePWRedundancy</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AllowBothTags</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseEVC</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseBD</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EncapsulationType</name>
<value xsi:type="xsd:string">DOT1QTRUNK</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
</properties>
</objectPath>
</objectPath>
</ns1:createInstance>
</soapenv:Body>
</soapenv:Envelope>
Pseudowire Policy
In this example, a EVC policy is created using pseudowire.
Example: CreateEVCServiceDefn_PW.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinition</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Name</name>
<value xsi:type="xsd:string">doc_pw</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinitionDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SubType</name>
<value xsi:type="xsd:string">Evc</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AccessType</name>
<value xsi:type="xsd:string">ETHERNET</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TransportType</name>
<value xsi:type="xsd:string">PSEUDOWIRE</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DirectConnect</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBDVlanId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EnablePWRedundancy</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PwTunnelSelection</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AllowBothTags</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseEVC</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseBD</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EncapsulationType</name>
<value xsi:type="xsd:string">DOT1QTRUNK</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
</properties>
</objectPath>
</objectPath>
</ns1:createInstance>
</soapenv:Body>
</soapenv:Envelope>
Create VPLS Policy
In this example, a EVC policy is created using VPLS.
Example: CreateVplsEVCPolicy.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinition</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Name</name>
<value xsi:type="xsd:string">VplsPolicy</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinitionDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SubType</name>
<value xsi:type="xsd:string">Evc</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AccessType</name>
<value xsi:type="xsd:string">ETHERNET</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TransportType</name>
<value xsi:type="xsd:string">VPLS</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniProtocolTunneling</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniKeepAlive</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniSpeed</name>
<value xsi:type="xsd:string">100</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniDuplex</name>
<value xsi:type="xsd:string">Half</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseExistingACLName</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanTranslationType</name>
<value xsi:type="xsd:string">NONE</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanTranslationNode</name>
<value xsi:type="xsd:string">AUTO</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DirectConnect</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBDVlanId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AllowBothTags</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseEVC</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseBD</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EncapsulationType</name>
<value xsi:type="xsd:string">DOT1QTRUNK</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">L2VpnGrpName</name>
<value xsi:type="xsd:string">VPNSC</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ElineName</name>
<value xsi:type="xsd:string">LocalSRTest1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickBridgeGroupName</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickBridgeDomainName</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
</properties>
</objectPath>
</objectPath>
</ns1:createInstance>
</soapenv:Body>
</soapenv:Envelope>
Create Local Connect Policy with ATM/Ethernet internetworking
In this example, a EVC policy is created using local connect with ATM/Ethernet internetworking.
The ATM_ETHERNET policy attribute is highlighted with bold in this example.
Example: ATM_ETHERNET_VC-Pol-LOCAL_Create-NBI-4.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinition</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Name</name>
<value xsi:type="xsd:string">ATM_ETHERNET_Local_VC</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Organization</name>
<value xsi:type="xsd:string">Customer1</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinitionDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SubType</name>
<value xsi:type="xsd:string">Evc</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TransportType</name>
<value xsi:type="xsd:string">LOCAL</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AccessType</name>
<!-- Access Type ATM_ETHERNET newly added for interworking -->
<value xsi:type="xsd:string">ATM_ETHERNET</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TemplateEnabled</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<!--AtmEncapsulationType newly added which can have values AAL0,AAL5,ALL5SNAP -->
<name xsi:type="xsd:string">AtmEncapsulationType</name>
<value xsi:type="xsd:string">AAL0</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<!--ATmTransportMode newly Added which can have values VP or VC -->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AtmTransportMode</name>
<value xsi:type="xsd:string">VC</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniProtocolTunneling</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniKeepAlive</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniSpeed</name>
<value xsi:type="xsd:string">None</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniDuplex</name>
<value xsi:type="xsd:string">None</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseExistingACLName</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">false</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DirectConnect</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">false</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EnablePWRedundancy</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PwTunnelSelection</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBDVlanId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<!-- Service Instance Name -->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiName</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item >
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AllowBothTags</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRanges</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">false</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopOuter</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopInner</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseEVC</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">false</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseBD</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EncapsulationType</name>
<value xsi:type="xsd:string">DOT1QTRUNK</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">PolicyTemplate</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RoleType</name>
<value xsi:type="xsd:string">N-PE</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DatafileName</name>
<value xsi:type="xsd:string">SampleData0</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DatafilePath</name>
<value xsi:type="xsd:string">Audit/Set-Audit-Rule</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TemplateAction</name>
<value xsi:type="xsd:string">APPEND</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TemplateActive</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</ns1:createInstance>
</soapenv:Body>
</soapenv:Envelope>
Create Pseudowire Policy with ATM/Ethernet Internetworking
In this example, a EVC policy is created using pseudowire with ATM/Ethernet internetworking.
The ATM_ETHERNET policy attribute is highlighted with bold in this example.
Example: ATM_ETHERNET_VC-Pol-PW_Create-NBI-4.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinition</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Name</name>
<value xsi:type="xsd:string">ATM_ETHERNET_PW_VC</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Organization</name>
<value xsi:type="xsd:string">Customer1</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinitionDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SubType</name>
<value xsi:type="xsd:string">Evc</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TransportType</name>
<value xsi:type="xsd:string">PSEUDOWIRE</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AccessType</name>
<!-- Access Type ATM_ETHERNET newly added for interworking -->
<value xsi:type="xsd:string">ATM_ETHERNET</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TemplateEnabled</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<!--AtmEncapsulationType newly added which can have values AAL0,AAL5,ALL5SNAP -->
<name xsi:type="xsd:string">AtmEncapsulationType</name>
<value xsi:type="xsd:string">AAL0</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<!--ATmTransportMode newly Added which can have values VP or VC -->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AtmTransportMode</name>
<value xsi:type="xsd:string">VC</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniProtocolTunneling</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniKeepAlive</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniSpeed</name>
<value xsi:type="xsd:string">None</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniDuplex</name>
<value xsi:type="xsd:string">None</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseExistingACLName</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">false</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DirectConnect</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">false</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EnablePWRedundancy</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PwTunnelSelection</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBDVlanId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<!-- Service Instance Name -->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiName</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item >
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AllowBothTags</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRanges</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">false</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopOuter</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopInner</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseEVC</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">false</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseBD</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EncapsulationType</name>
<value xsi:type="xsd:string">DOT1QTRUNK</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">PolicyTemplate</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RoleType</name>
<value xsi:type="xsd:string">N-PE</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DatafileName</name>
<value xsi:type="xsd:string">SampleData0</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DatafilePath</name>
<value xsi:type="xsd:string">Audit/Set-Audit-Rule</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TemplateAction</name>
<value xsi:type="xsd:string">APPEND</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TemplateActive</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</ns1:createInstance>
</soapenv:Body>
</soapenv:Envelope>
Configuring an SVI/EVC Hybrid Scenario
In the following example, a EVC policy is created with the EVC/SVI Hybrid scenario. The attribute relevant for the EVC/SVI Hybrid scenario is XconnectOnSVI (in bold below), which in the example is set to true.
Example: CreateEVCServiceDefn_PW_1.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinition</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Name</name>
<value xsi:type="xsd:string">doc_pw</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinitionDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SubType</name>
<value xsi:type="xsd:string">Evc</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AccessType</name>
<value xsi:type="xsd:string">ETHERNET</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TransportType</name>
<value xsi:type="xsd:string">PSEUDOWIRE</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DirectConnect</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBDVlanId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EnablePWRedundancy</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<!-- XConnect ON SVI-->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PwTunnelSelection</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AllowBothTags</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseEVC</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseBD</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EncapsulationType</name>
<value xsi:type="xsd:string">DOT1QTRUNK</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
</properties>
</objectPath>
</objectPath>
</ns1:createInstance>
</soapenv:Body>
</soapenv:Envelope>
Policy for Specifying Service Instance Name for EVC Service Requests
The following example shows how to create a policy that specifies a service instance name for EVC service requests. The attribute used to specify a service instance name in EVC service requests is AutoPickEsiName (in bold below), which in the example is set to true.
Example: CreateEVCServiceDefn_PW_2.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinition</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Name</name>
<value xsi:type="xsd:string">doc_pw</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceDefinitionDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SubType</name>
<value xsi:type="xsd:string">Evc</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AccessType</name>
<value xsi:type="xsd:string">ETHERNET</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TransportType</name>
<value xsi:type="xsd:string">PSEUDOWIRE</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DirectConnect</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBDVlanId</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EnablePWRedundancy</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickEsiName</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item >
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PwTunnelSelection</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCId</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AllowBothTags</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PushInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PopInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateInner</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TranslateOuter</name>
<value xsi:type="xsd:string">false</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseEVC</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseBD</name>
<value xsi:type="xsd:string">true</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">EncapsulationType</name>
<value xsi:type="xsd:string">DOT1QTRUNK</value>
<qualifier xsi:type="ns1:CIMQualifier">
<name xsi:type="xsd:string">editable</name>
<value xsi:type="xsd:string">true</value>
</qualifier>
</item>
</properties>
</objectPath>
</objectPath>
</ns1:createInstance>
</soapenv:Body>
</soapenv:Envelope>
Related APIs
•CreateMPLSServiceDefn_PE_NO_CE_IPV4_IPV6_Unique_RT.xml
Note CreateMPLSServiceDefn_PE_NO_CE_IPV4_IPV6_Unique_RT.xml is omitted from the build as the same result is obtained by creating a PE_NO_CE policy.
•CreateMPLSServiceDefn_Bundle_PE_CE_IPV4_IPV6.xml
•CreateMPLSServiceDefn_Bundle_PE_NO_CE_IPV4_IPV6.xml
EVC Service Requests
With a EVC service request, you can configure interfaces on an N-PE to support EVC infrastructure features.
Before creating a service request, a service policy has to be defined. Use a predefined policy template as is or with modifications to create a service request, and deploy the service. For information on EVC policies, see EVC Service Definitions.
Overview
A EVC service request defines the service definition and VPN to use, assigns interfaces and attributes for each attachment circuit (EvcLink), and applies template information.
Note The attachment circuit, or EvcLink, defines the layer 2 path from the U-PE to the NPE, including any intermediate devices.
When you deploy a EVC service request using a service order, the attributes specified in the service definition are applied to the devices and interfaces defined in the service request, along with the link attributes for each attachment circuit.
The service request link attributes include any parameters marked as editable in the service definition and link parameters specific to each attachment circuit.
The following XML example shows a partial list of the properties that can be specified for the attachment circuit EvcLink.
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/3</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">261</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">7845</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">false</value>
</item>
</properties>
</objectPath>
</objectPath>
End-To-End Wires
An end-to-end wire is the link from one endpoint through the service provider cloud to another endpoint. In most cases, these links are from CE to CE. An attachment circuit is the link from the CE to the PE. If no is CE present, the attachment circuit link is from PE-CLE to PE-CLE.
The following network diagrams depict the three types of connectivity:
•Local Connect Network Diagram
Note ATM/Ethernet internetworking only supports pseudowire and local connect.
Pseudowire Network Diagram
In the EVC network example shown in Figure 9-1, there are two EvcLinks:
•ence132 to enswosr1
•ence61 to enswosr2.
Figure 9-1 End to End Wire Network Example - Pseudowire
VPLS Network Diagram
In the EthernetEVCS network example shown in Figure 9-2, there are three EvcLinks:
•ence132 to enswosr1
•ence61 to enswosr2
•ence51 to enpe5.
Figure 9-2 End to End Wire Network Example - VPLS
Local Connect Network Diagram
In the EthernetEVC network example shown in Figure 9-3, there are two EvcLinks:
•ence132 to enswosr1
•ence51 to enswosr1.
Figure 9-3 End to End Wire Network Example - Local Connect
Service Request Examples
The following XML examples illustrate how you work with service requests for EVC APIs. They also demonstrate the kinds of properties (attributes) that need to be specified for each request.
The first three are XML examples of service requests for the three supported connectivity types:
•Local Connect Service Request
•Modifying a EVC Service Request
•Creating Access Ring with two NPEs
•Configuring an SVI/EVC Hybrid Scenario Service Request
•Specifying Service Instance Name for EVC Service Requests
•Creating a Local Connect Service Request for IOS-XR using Bridge Domain
•Creating a Pseudowire Service Request with P2P E-line Name
•Creating a Local Connect Service Request with ATM Ethernet
•Creating a Pseudowire Service Request with ATM Ethernet
•Creating a VPLS Service Request with IOS XR
Local Connect Service Request
In this example, a EVC service request is created using local connect.
Example: CreateEVCServiceOrder_LOCAL.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">doc_local</value>
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">cust3_vpn2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7600-3</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">FastEthernet2/3</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">18</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">1947</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">745</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">746</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
<!-- L2Access Links -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Upe</name>
<value xsi:type="xsd:string">iscind-3750-6</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">FastEthernet1/0/7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NPC</name>
<value xsi:type="xsd:string">27</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickOuterVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1570</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">false</value>
</item>
</properties>
</objectPath>
<!-- <objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">2458</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">547</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">545</value>
</item>
</properties>
</objectPath> -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ProtocolTunnelling</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpDropThreshold</name>
<value xsi:type="xsd:string">10</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpDropThreshold</name>
<value xsi:type="xsd:string">20</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpDropThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RecoveryInterval</name>
<value xsi:type="xsd:string">4789</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SpeedType</name>
<value xsi:type="xsd:string">Auto</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DuplexType</name>
<value xsi:type="xsd:string">Half</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ViolationActionType</name>
<value xsi:type="xsd:string">RESTRICT</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Aging</name>
<value xsi:type="xsd:string">124</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MacAddress</name>
<value xsi:type="xsd:string">2458</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BroadcastTraffic</name>
<value xsi:type="xsd:string">24</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MulticastTraffic</name>
<value xsi:type="xsd:string">34</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UnicastTraffic</name>
<value xsi:type="xsd:string">44</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DisableCDP</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">Description</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniKeepAlive</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
Pseudowire Service Request
In this example, a EVC service request is created using pseudowire.
Example: CreateEVCServiceOrder_PW.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CarrierId</name>
<value xsi:type="xsd:string">322</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">doc_pw</value>
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">cust1_vpn1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCID</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseBackupVCID</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/3</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">261</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">7845</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">false</value>
</item>
</properties>
</objectPath>
<!-- SRAssociated Templates -->
</objectPath>
<!-- L2Access Links -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Upe</name>
<value xsi:type="xsd:string">iscind-3750-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">FastEthernet1/0/8</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NPC</name>
<value xsi:type="xsd:string">31</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ProtocolTunnelling</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpDropThreshold</name>
<value xsi:type="xsd:string">10</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpDropThreshold</name>
<value xsi:type="xsd:string">20</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpDropThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SpeedType</name>
<value xsi:type="xsd:string">100</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DuplexType</name>
<value xsi:type="xsd:string">Half</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MacAddress</name>
<value xsi:type="xsd:string">5</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Aging</name>
<value xsi:type="xsd:string">201</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ViolationActionType</name>
<value xsi:type="xsd:string">RESTRICT</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BroadcastTraffic</name>
<value xsi:type="xsd:string">25</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MulticastTraffic</name>
<value xsi:type="xsd:string">25</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UnicastTraffic</name>
<value xsi:type="xsd:string">25</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
VPLS Service Request
In this example, a EVC service request is created using VPLS.
Example: CreateEVCServiceOrder_VPLS.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">doc_vpls</value>
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">cust1_vpn2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCID</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/1</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1544</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">243</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
<!-- L2Access Links -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Upe</name>
<value xsi:type="xsd:string">iscind-3750-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">FastEthernet1/0/12</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NPC</name>
<value xsi:type="xsd:string">31</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1685</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ProtocolTunnelling</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpDropThreshold</name>
<value xsi:type="xsd:string">10</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpDropThreshold</name>
<value xsi:type="xsd:string">20</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpDropThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SpeedType</name>
<value xsi:type="xsd:string">Auto</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DuplexType</name>
<value xsi:type="xsd:string">Full</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ViolationActionType</name>
<value xsi:type="xsd:string">RESTRICT</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Aging</name>
<value xsi:type="xsd:string">1244</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MacAddress</name>
<value xsi:type="xsd:string">2458</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BroadcastTraffic</name>
<value xsi:type="xsd:string">54</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MulticastTraffic</name>
<value xsi:type="xsd:string">55</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UnicastTraffic</name>
<value xsi:type="xsd:string">15</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DisableCDP</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">Description</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniKeepAlive</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
Modifying a EVC Service Request
In this example, a EVC service request is modified.
Example: ModifyEVCServiceOrder.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2008-04-15T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList" soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CarrierId</name>
<value xsi:type="xsd:string">322</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2009-04-15T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">modifyInstance</actionName>
<objectPath subAction="modifyInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">MYSR-1-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath subAction="modifyInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<keyProperties xsi:type="ns1:CIMKeyPropertyList"
soapenc:arrayType="ns1:CIMKeyProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">LocatorId</name>
<value xsi:type="xsd:string">485</value>
</item>
</keyProperties>
<!-- delete instance -- >
<objectPath subAction="deleteInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<keyProperties xsi:type="ns1:CIMKeyPropertyList"
soapenc:arrayType="ns1:CIMKeyProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">LocatorId</name>
<value xsi:type="xsd:string">524</value>
</item>
</keyProperties>
</objectPath>
<!-- Modify Instance -->
<objectPath subAction="modifyInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<keyProperties xsi:type="ns1:CIMKeyPropertyList"
soapenc:arrayType="ns1:CIMKeyProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">LocatorId</name>
<value xsi:type="xsd:string">527</value>
</item>
</keyProperties>
<objectPath subAction="modifyInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanTranslationNode</name>
<value xsi:type="xsd:string">AUTO</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanTranslationType</name>
<value xsi:type="xsd:string">2:1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanID</name>
<value xsi:type="xsd:string">188</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CeVlanID</name>
<value xsi:type="xsd:string">195</value>
</item>
</properties>
</objectPath>
<objectPath subAction="modifyInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">5258</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">1928</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">2684</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath subAction="modifyInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ProtocolTunnelling</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpDropThreshold</name>
<value xsi:type="xsd:string">11</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpDropThreshold</name>
<value xsi:type="xsd:string">22</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpDropThreshold</name>
<value xsi:type="xsd:string">25</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpThreshold</name>
<value xsi:type="xsd:string">281</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpThreshold</name>
<value xsi:type="xsd:string">2017</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpThreshold</name>
<value xsi:type="xsd:string">2107</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath subAction="modifyInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">******AC2*******</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MacAddress</name>
<value xsi:type="xsd:string">568</value>
</item>
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UserDefinedACLName</name>
<value xsi:type="xsd:string">ACL</value>
</item> -->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BroadcastTraffic</name>
<value xsi:type="xsd:string">55</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Aging</name>
<value xsi:type="xsd:string">1330</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniKeepAlive</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StdUniPort</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ViolationActionType</name>
<value xsi:type="xsd:string">PROTECT</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">FilterBPDU</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DuplexType</name>
<value xsi:type="xsd:string">Half</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UnicastTraffic</name>
<value xsi:type="xsd:string">54</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MulticastTraffic</name>
<value xsi:type="xsd:string">56</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SpeedType</name>
<value xsi:type="xsd:string">1000</value>
</item>
</properties>
</objectPath>
<!-- <objectPath subAction="createInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIMacACLAddresses</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MacAddress</name>
<value xsi:type="xsd:string">2222.3333.6666</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Permission</name>
<value xsi:type="xsd:string">permit</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MacAclRange</name>
<value xsi:type="xsd:string">1111.2222.4444</value>
</item>
</properties>
</objectPath> -->
<objectPath subAction="createInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcSecureMacAddress</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MacAddress</name>
<value xsi:type="xsd:string">cccc.cccc.dddd</value>
</item>
</properties>
</objectPath>
</objectPath>
<!-- Create Instance -->
<!-- <objectPath subAction="createInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/9</value>
</item>
</properties>
<objectPath subAction="createInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath subAction="createInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">1584</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MatchInnerVlan</name>
<value xsi:type="xsd:string">false</value>
</item>
</properties>
</objectPath>
<objectPath subAction="createInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ProtocolTunnelling</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpDropThreshold</name>
<value xsi:type="xsd:string">10</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpDropThreshold</name>
<value xsi:type="xsd:string">20</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpDropThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath subAction="createInstance" xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">**Half**</value>
</item>
</properties>
</objectPath>
</objectPath> -->
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
Creating Access Ring with two NPEs
In the following three XMLs, a two calls for setting up an access ring are depicted. It is done using the following sequence:
1. Create Ring with Two NPE's - CreateRing.xml
2. Create NPC - CreateNamedPhysicalCircuitRingExisting.xml
Both examples are depicted in the following.
Example: CreateRing.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">Ring</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">PhysicalLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcDevice</name>
<value xsi:type="xsd:string">iscind-3750-4</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestDevice</name>
<value xsi:type="xsd:string">iscind-7600-3</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcIfName</name>
<value xsi:type="xsd:string">FastEthernet1/0/16</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestIfName</name>
<value xsi:type="xsd:string">FastEthernet2/13</value> </item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">PhysicalLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcDevice</name>
<value xsi:type="xsd:string">iscind-7600-3</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestDevice</name>
<value xsi:type="xsd:string">iscind-7609-2</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcIfName</name>
<value xsi:type="xsd:string">LoopBack1000</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestIfName</name>
<value xsi:type="xsd:string">LoopBack100</value> </item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">PhysicalLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcDevice</name>
<value xsi:type="xsd:string">iscind-7609-2</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestDevice</name>
<value xsi:type="xsd:string">iscind-3750-4</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcIfName</name>
<value xsi:type="xsd:string">GigabitEthernet1/0/4</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestIfName</name>
<value xsi:type="xsd:string">FastEthernet1/0/18</value> </item>
</properties>
</objectPath>
</properties>
</objectPath>
</ns1:createInstance>
</soapenv:Body>
</soapenv:Envelope>
Creating NPC
In this second step, an NPC (Named Physical Circuit) is configured before the access ring service request can be created.
Example: CreateNamedPhysicalCircuitRingExisting.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">NamedPhysicalCircuit</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">NamedPhysicalCircuitRing</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">LocatorId</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">PhysicalLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcDevice</name>
<value xsi:type="xsd:string">iscind-3750-4</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestDevice</name>
<value xsi:type="xsd:string">iscind-7600-2</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcIfName</name>
<value xsi:type="xsd:string">FastEthernet1/1</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestIfName</name>
<value xsi:type="xsd:string">FastEthernet3/1</value> </item>
</properties>
</objectPath>
</objectPath>
</ns1:createInstance>
</soapenv:Body>
</soapenv:Envelope>
Configuring an SVI/EVC Hybrid Scenario Service Request
The following is an example of how to configure a hybrid EVC/SVI scenario in a EVC service request.
If XConnectOnSVI is enabled, the forwarding commands will be configured under SVI for both flex and non-flex. If it is disabled, the forwarding commands will be configured under service instance if it is an EVC link. If the link is a non-flex link, these commands will be configured under a subinterface.
The attribute relevant for the EVC/SVI Hybrid scenario is XconnectOnSVI (in bold below), which in the example is set to true
Example: CreateEVCServiceOrder_PW_1.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CarrierId</name>
<value xsi:type="xsd:string">322</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">L2_NBI_1</value>
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">vpn</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCID</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseBackupVCID</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Description</name>
<value xsi:type="xsd:string">BD=T,SVI = F Flex and SVI=T,Non-Flex created thru NBI</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/8</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">2611</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">false</value>
</item>
</properties>
</objectPath>
</objectPath>
<!-- L2Access Links -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Upe</name>
<value xsi:type="xsd:string">iscind-3750-2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">FastEthernet1/0/4</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NPC</name>
<value xsi:type="xsd:string">4</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ProtocolTunnelling</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpDropThreshold</name>
<value xsi:type="xsd:string">10</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpDropThreshold</name>
<value xsi:type="xsd:string">20</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpDropThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpThreshold</name>
<value xsi:type="xsd:string">27</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpThreshold</name>
<value xsi:type="xsd:string">2007</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CdpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VtpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">StpEnable</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PortSecurity</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SpeedType</name>
<value xsi:type="xsd:string">100</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DuplexType</name>
<value xsi:type="xsd:string">Half</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MacAddress</name>
<value xsi:type="xsd:string">5</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Aging</name>
<value xsi:type="xsd:string">201</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ViolationActionType</name>
<value xsi:type="xsd:string">RESTRICT</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BroadcastTraffic</name>
<value xsi:type="xsd:string">25</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">MulticastTraffic</name>
<value xsi:type="xsd:string">25</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UnicastTraffic</name>
<value xsi:type="xsd:string">25</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
Specifying Service Instance Name for EVC Service Requests
The following is an example of how to specify a service instance name for EVC service requests. The attributes relevant for the Service Instance Name are ServiceInstName and AutoPickServiceInstName (both in bold below), which in the example are set to manualNameNBI4 and false respectively.
Example: CreateEVCServiceOrder_PW_2.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<!-- item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CarrierId</name>
<value xsi:type="xsd:string">322</value>
</item -->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">GUI_PW</value>
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">vpn-core-PW</value>
</item>
<!-- item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCID</name>
<value xsi:type="xsd:string">true</value>
</item -->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/12</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">100</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstName</name>
<value xsi:type="xsd:string">manualNameNBI4</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstName</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">256</value>
</item>
</properties>
</objectPath>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/13</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">100</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstName</name>
<value xsi:type="xsd:string">manualNameNBI4</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstName</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">256</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
Creating a Local Connect Service Request for IOS-XR using Bridge Domain
The following is an example of how to create a EVC bridge domain service request using local connect with IOS XR. The attributes relevant for the bridge domain feature are BridgeGroupName, BridgeDomainName, UsePwClass, and PwClassId (all in bold below).
Example: CreateEVCSR_IOSXR_Local_With_BridgeDomain.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">Policy1</value>
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">vpn1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">met1-asr9k-dist1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet0/0/0/36</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">19</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BridgeGroupName</name>
<value xsi:type="xsd:string">SampleBG1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BridgeDomainName</name>
<value xsi:type="xsd:string">SampleBD1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UsePwClass</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PwClassId</name>
<value xsi:type="xsd:string">1</value>
</item>
<!--<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">L2VpnGrpName</name>
<value xsi:type="xsd:string">VPNSC</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ElineName</name>
<value xsi:type="xsd:string">thfda</value>
</item> -->
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>-->
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">99</value>
</item>-->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">1845</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">1376</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
<!-- Test -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">met1-asr9k-dist1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet0/0/0/34</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">1009</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BridgeGroupName</name>
<value xsi:type="xsd:string">SampleBG1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BridgeDomainName</name>
<value xsi:type="xsd:string">SampleBD1</value>
</item>
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">L2VpnGrpName</name>
<value xsi:type="xsd:string">VPNSC</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ElineName</name>
<value xsi:type="xsd:string">gfhghf</value>
</item> -->
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>-->
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">999</value>
</item>-->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">1231</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">1046</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
Creating a Pseudowire Service Request with P2P E-line Name
In the following example, a EVC service request with pseudowire and p2p e-line name is created. The attributes relevant for the bridge domain feature are L2VpnGrpName, ElineName, UsePwClass, and PwClassId (all in bold below).
UsePwClass and PwClassId are supported only for IOS XR devices and serve to associate the PW class inventories created from the CreatePWclass.xml API.
Example: CreateEVCSR_IOSXR_PW_With_p2p_Elinename.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">Policy2</value>
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">vpn1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCID</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">met1-asr9k-dist1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet0/0/0/36</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">19</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UsePwClass</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PwClassId</name>
<value xsi:type="xsd:string">1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">L2VpnGrpName</name>
<value xsi:type="xsd:string">VPNSC</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ElineName</name>
<value xsi:type="xsd:string">abc</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>-->
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">99</value>
</item>-->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">1845</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">1376</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
<!-- Test -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">met1-asr9k-dist2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet0/1/0/34</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">1009</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">L2VpnGrpName</name>
<value xsi:type="xsd:string">VPNSC</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ElineName</name>
<value xsi:type="xsd:string">abc</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>-->
<!-- <item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">999</value>
</item>-->
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">1845</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">1046</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
Creating a Local Connect Service Request with ATM Ethernet
In the following example, a EVC service request with ATM Ethernet and local connect is created. The attributes relevant for the bridge domain feature are AtmTransportMode, AtmVcd, VirtualConnId, and VirtualPvtId (all in bold below).
Example: CreateATM_ETHERNET_LOCAL_WithBD.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">ATM_Local</value>
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">vpn1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">ATM6/0/0</value>
</item>
</properties>
<!--EvcATMLinkAttrs class newly added to provide ATM Attributes values -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcATMLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AtmInterfaceEncapType</name>
<value xsi:type="xsd:string">AAL5SNAP</value><!--AtmInterfaceEncapType to provide ATM Encapsulation Types AAL0,ALL5 or AAL5SNAP -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AtmTransportMode</name>
<value xsi:type="xsd:string">VC</value><!--Transport Mode VC or VP -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">True</value><!--UniShutDown -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AtmVcd</name>
<value xsi:type="xsd:string">2222</value><!--ATM VCD (1-2147483647) -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VirtualConnId</name>
<value xsi:type="xsd:string">111</value><!-- VPI (0-255) -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VirtualPvtId</name>
<value xsi:type="xsd:string">222</value><!-- VPI (0-255) -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PwTunnelSelection</name>
<value xsi:type="xsd:string">true</value><!--PW Tunnel Selction -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InterfaceTunnel</name>
<value xsi:type="xsd:string">10</value><!--Tunnel ID (0-2147483647)-->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">20</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UsePwClass</name>
<value xsi:type="xsd:string">true</value><!--PW Tunnel Selction -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PwClassName</name>
<value xsi:type="xsd:string">pw-class</value><!--Tunnel ID -->
</item>
</properties>
</objectPath>
</objectPath>
<!--Ethernet Link -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/13</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">20</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">1948</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">745</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">746</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/14</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">20</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">1948</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">745</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">746</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
Creating a Pseudowire Service Request with ATM Ethernet
In the following example, a EVC service request with ATM Ethernet and pseudowire is created. The attributes for specifying the pw-class are UseExistingPwClass and ExistingPwClassName higlighted in bold.
UseExistingPwClass and ExistingPwClassName are applicable only for ATM Ethernet interworking services. They are supported only for IOS devices and require you to provide the PW class name, which should already exist in the device.
The attributes relevant for the bridge domain feature are AtmTransportMode, AtmVcd, VirtualConnId, and VirtualPvtId (all in bold below).
Example: CreateATM_ETH_PW_WithBridgeDomain.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:48.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:48.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">ATM_ETHERNET_PW_VC</value><!-- Interworking policy -->
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCID</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">vpn1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">ATM6/0/0</value>
</item>
</properties>
<!--EvcATMLinkAttrs class newly added to provide ATM Attributes values -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcATMLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AtmInterfaceEncapType</name>
<value xsi:type="xsd:string">AAL5SNAP</value><!--AtmInterfaceEncapType to provide ATM Encapsulation Types AAL0,ALL5 or AAL5SNAP -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AtmTransportMode</name>
<value xsi:type="xsd:string">VC</value><!--Transport Mode VC or VP -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniShutdown</name>
<value xsi:type="xsd:string">True</value><!--UniShutDown -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AtmVcd</name>
<value xsi:type="xsd:string">2222</value><!--ATM VCD -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VirtualConnId</name>
<value xsi:type="xsd:string">111</value><!-- VCI values -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VirtualPvtId</name>
<value xsi:type="xsd:string">222</value><!-- VPI values -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">70</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseExistingPwClass</name>
<value xsi:type="xsd:string">true</value><!--PW Tunnel Selction -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ExistingPwClassName</name>
<value xsi:type="xsd:string">pwclass1</value><!--Tunnel ID -->
</item>
</properties>
</objectPath>
</objectPath>
<!-- Ethernet Link -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/16</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">71</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseExistingPwClass</name>
<value xsi:type="xsd:string">true</value><!--PW Tunnel Selction -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ExistingPwClassName</name>
<value xsi:type="xsd:string">pwclass2</value><!--Tunnel ID -->
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">3222</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">745</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">746</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
<!-- Ethernet Link -->
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">iscind-7609-2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet7/0/15</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">71</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseExistingPwClass</name>
<value xsi:type="xsd:string">true</value><!--PW Tunnel Selction -->
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ExistingPwClassName</name>
<value xsi:type="xsd:string">pwclass2</value><!--Tunnel ID -->
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickServiceInstId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceInstID</name>
<value xsi:type="xsd:string">3222</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BothTags</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">OuterVlanRange</name>
<value xsi:type="xsd:string">745</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">InnerVlanRange</name>
<value xsi:type="xsd:string">746</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">*** AC1 ***</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
Creating a VPLS Service Request with IOS XR
In the following example, a VPLS EVC service request is created. The attributes for specifying the vpls class are AutoPickBridgeGroupName, AutoPickBridgeDomainName, BridgeGroupName, and BridgeDomainName higlighted in bold.
Example: CreateEVCSR_IOSXR_VPLS.xml
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://www.cisco.com/cim-cx/2.0"
xmlns:ns1="urn:CIM">
<soapenv:Header>
<!-- WaitTimeout has a default set in system properties.-->
<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"
Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>
</soapenv:Header>
<soapenv:Body>
<ns1:performBatchOperation>
<actions xsi:type="ns1:CIMActionList"
soapenc:arrayType="ns1:CIMAction[]">
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceOrder</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceName</name>
<value xsi:type="xsd:string">ServiceOrder257</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DesiredDueDate</name>
<value xsi:type="xsd:dateTime">2008-12-13T14:55:38.885Z</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">NumberOfRequests</name>
<value xsi:type="xsd:string">1</value>
</item>
</properties>
</objectPath>
</action>
<action>
<actionName xsi:type="xsd:string">createInstance</actionName>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequest</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">RequestName</name>
<value xsi:type="xsd:string">EvcSR-7</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Type</name>
<value xsi:type="xsd:string">Evc</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">ServiceRequestDetails</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">ServiceDefinition</name>
<value xsi:type="xsd:string">VplsPolicy</value>
<qualifier xsi:type="xsd:string">
<name xsi:type="xsd:string">ServiceDefinitionType</name>
<value xsi:type="xsd:string">Evc</value>
</qualifier>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VPN</name>
<value xsi:type="xsd:string">vpn2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseSVI</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutopickVCID</name>
<value xsi:type="xsd:string">true</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">met1-asr9k-dist2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet0/1/0/11</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">4005</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBridgeGroupName</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBridgeDomainName</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BridgeGroupName</name>
<value xsi:type="xsd:string">bg1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BridgeDomainName</name>
<value xsi:type="xsd:string">bd1</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">AC1</value>
</item>
</properties>
</objectPath>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Npe</name>
<value xsi:type="xsd:string">met1-asr9k-dist1</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UniInftId</name>
<value xsi:type="xsd:string">GigabitEthernet0/0/0/11</value>
</item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcETHLinkAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SystemMTU</name>
<value xsi:type="xsd:string">1563</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickVlanId</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">VlanID</name>
<value xsi:type="xsd:string">4006</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">UseServiceInst</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">XconnectOnSVI</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBridgeGroupName</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">AutoPickBridgeDomainName</name>
<value xsi:type="xsd:string">false</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BridgeGroupName</name>
<value xsi:type="xsd:string">bg2</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">BridgeDomainName</name>
<value xsi:type="xsd:string">bd2</value>
</item>
</properties>
</objectPath>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Shutdown</name>
<value xsi:type="xsd:string">true</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">PeIntfDesc</name>
<value xsi:type="xsd:string">AC1</value>
</item>
</properties>
</objectPath>
</objectPath>
</objectPath>
</objectPath>
</action>
</actions>
</ns1:performBatchOperation>
</soapenv:Body>
</soapenv:Envelope>
End-to-End Provisioning Process
This section describes the process for using the API to provision EVC, and includes the required operation, object definition (className), and parameter definitions.
Process Summary
This EVC provisioning example uses the following processes:
1. Create device groups (optional).
2. Create devices.
3. Collect device configurations.
4. Create provider.
5. Create regions.
6. Declare devices as PEs.
7. Create access domains and assign PEs to them.
8. Create customer.
9. Create sites.
10. Create named physical circuits.
11. Create VLAN ID pool.
12. Create VC ID pool.
13. Create VPN.
14. Create EVC service definition (policy).
15. Create EVC service request.
Prerequisites
For security reasons, Prime Fulfillment requires the virtual terminal protocol (VTP) to be configured in transparent mode on all switches before provisioning EVC service requests.
To set the VTP mode, enter the following Cisco IOS commands:
configure terminal
vtp mode transparent
Enter the following Cisco IOS command to verify that the VTP has changed to transparent mode:
Show vtp status
Detailed Process
To provision EVC using Prime Fulfillment API, an EVC service policy and an EVC service request are required and only one subtype will be defined and of type Evc.
The EVC service policy/service definition specifies the attributes related to the EVC links and non-EVC links. The service request defines the device interfaces for each EVC/non-EVC link connection and can optionally override policy attributes in each of the corresponding links.
When you deploy an EVC service request using a service order, the attributes specified in the service definition are applied to the devices and interfaces listed in the service request, along with the attributes for each of the EVC/non-EVC links.
This section describes the process for provisioning EVC using XML examples.
The complete list of XML examples for EVC is available here:
Cisco Prime Fulfillment API Programmer Reference 6.2
Note For clarity, this provisioning process shows each step as a separate XML request. Many of these steps can be combined using performBatchOperations.
Step 1 Create device groups (optional).
|
|
|
|
|---|---|---|
createInstance |
DeviceGroup |
Name |
XML Examples:
•CreateDeviceGroup.xml
Tip If you plan to create device groups, create the empty device groups before you create the devices. As you create each device, add the associated device group name as a key property in the create device XML request.
In the following example, the device group (CustDev) is added as a key property when creating the device CiscoRouter:
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">CiscoRouter</className>
<properties xsi:type="ns1:CIMPropertyList" soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DeviceGroup</name>
<value xsi:type="xsd:string">CustDev</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">CfgUpDnldMech</name>
<value xsi:type="xsd:string">DEFAULT</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">TransportMechanism</name>
<value xsi:type="xsd:string">DEFAULT</value>
</item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">Password</name>
<value xsi:type="xsd:string">vpnsc</value>
</item>
Step 2 Create devices.
Every network element that Prime Fulfillment manages must be defined as a device in the system. An element is any device from which Prime Fulfillment can collect configuration information.
|
|
|
|
|---|---|---|
createInstance |
• • |
One or more of the following: • • • |
XML Examples:
•CreateCiscoRouter.xml
•CreateCat.xml
Step 3 Collect device configurations.
A device configuration collection is a task. This task uploads the current configuration from the device to the Prime Fulfillment database. The collection task is executed through a service request, and the service request is scheduled through a service order.
Note The service request name must be unique for each NBI API.
XML Examples:
•CreateTaskServiceOrderCollection.xml
Step 4 Create a provider.
The provider is the administrative domain of an ISP, with one BGP autonomous system (AS) number. The network owned by the provider is called the backbone network. If an ISP has two AS numbers, you must define it as two provider administrative domains.
|
|
|
|
|---|---|---|
createInstance |
Provider |
• • |
XML Examples:
CreateProvider.xml
Step 5 Create regions.
Each provider can contain multiple regions.
|
|
|
|
|---|---|---|
createInstance |
Region |
• • |
XML Examples:
CreateRegion.xml
Step 6 Declare devices as PEs.
The XML request that assigns a PE role to a device is also used to:
•Assign PE devices to Regions/Provider
•Specify interface information
|
|
|
|
|---|---|---|
createInstance |
PE |
• • • – – • • |
XML Examples:
CreatePE.xml
Step 7 Create access domains.
Prime Fulfillment assigns a VLAN ID to the attachment circuit from the VLAN ID pool. Select all PE-POP devices to be associated with this domain, and later in the process, when VLAN ID pools are created, the PE-POP is automatically assigned a VLAN ID.
Note If provisioning for an Ethernet provider core, all PE devices must be in the same access domain and a single VLAN ID is used for the entire VPLS VPN. If provisioning for an MPLS provider core, the PE devices can be in different access domains.
|
|
|
|
|---|---|---|
createInstance |
AccessDomain |
• • • |
XML Examples:
•CreateAccessDomain.xml
Step 8 Create a customer.
A customer is a requestor of VPN services. Each customer can contain multiple customer sites. Each site belongs to only one customer and can contain multiple CPEs.
|
|
|
|
|---|---|---|
createInstance |
Organization |
• |
XML Examples:
•CreateOrganization.xml
Step 9 Create sites and assign customers (Organizations) to them.
|
|
|
|
|---|---|---|
createInstance |
Site |
• • |
XML Examples:
•CreateSite.xml
Step 10 Create Named Physical Circuits (NPCs). This step is not required if you plan to manually configure the physical links in the VPLS service request (Step 16).
Create an NPC for each attachment circuit (CE/UNI to PE-POP link). If there are intermediate devices, those links must also be added to the NPC using PhysicalLink.
Note When creating an NPC, you must specify the CPE as the source device and the PE-POP as the destination device. If there are intermediate devices, such as PE-CLEs, the source and destination devices must follow the direction of the CPE to PE-POP link.
|
|
|
|
|---|---|---|
createInstance |
NamedPhysicalCircut |
PhysicalLink |
PhysicalLink |
• • • • |
You can create one XML request for the NamedPhysicalCircuit and include multiple PhysicalLinks as shown in the following example:
<ns1:createInstance>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">NamedPhysicalCircuit</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">PhysicalLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcDevice</name>
<value xsi:type="xsd:string">Device1</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestDevice</name>
<value xsi:type="xsd:string">Device2</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcIfName</name>
<value xsi:type="xsd:string">Intf1/0</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestIfName</name>
<value xsi:type="xsd:string">Intf2/1</value> </item>
</properties>
<objectPath xsi:type="ns1:CIMObjectPath">
<className xsi:type="xsd:string">PhysicalLink</className>
<properties xsi:type="ns1:CIMPropertyList"
soapenc:arrayType="ns1:CIMProperty[]">
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcDevice</name>
<value xsi:type="xsd:string">Device3</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestDevice</name>
<value xsi:type="xsd:string">Device5</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">SrcIfName</name>
<value xsi:type="xsd:string">Intf3/0</value> </item>
<item xsi:type="ns1:CIMProperty">
<name xsi:type="xsd:string">DestIfName</name>
<value xsi:type="xsd:string">Intf5/1</value> </item>
</properties>
</objectPath>
</objectPath>
</ns1:createInstance>
XML Examples:
•CreateNamedPhysicalCircuit.xml
•CreateNamedPhysicalCircuitRing.xml—Use this example if there is a Ring topology configuration on the PE-CLEs.
•CreateNamedPhysicalCircuitRingExisting.xml—Use this example to reference an NPC ring that has already been created.
Step 11 Create VLAN ID pool.
Create a VLAN ID pool, specify a range, and associate it to an access domain to manually enter the parameters for a VLAN ID pool. To have Prime Fulfillment automatically assign VLANs to the attachment circuits, specify the Autopick_Vlan_ID keyword in the service definition (Step 15).
When provisioning for an Ethernet core, VPLS service requests use the VLAN ID to reference the attachment circuits.
|
|
|
|
|---|---|---|
createInstance |
VlanIdPool |
• • • • |
XML Examples:
•CreateVlanIdPool.xml
Step 12 Create VC ID pool.
For a VPLS VPN, all PE-POP routers use the same VC ID to establish the virtual circuit (VC) across the provider core. The VC ID is also the VPN ID and is assigned from the VC ID pool. Prime Fulfillment ensures that VC IDs are unique among VPLS VPNs.
Note A VC ID pool is global (not associated with a provider or organization).
|
|
|
|
|---|---|---|
createInstance |
VcIdPool |
• • |
XML Examples:
•CreateVcIdPool.xml
Step 13 Create a VPN.
When you create a VPN to use in VPLS provisioning, you must enable it to support VPLS (VplsVpn=true), and define the type of service (ERS or EWS).
Prime Fulfillment assigns a VPN ID (from the VC ID pool) to each VPLS VPN.
|
|
|
|
|---|---|---|
createInstance |
VPN |
• • • • – – |
XML Examples:
•CreateVPN.xml
Step 14 Create EVC service definition (policy).
A EVC service definition specifies the core type, service subtype, device properties, and the attributes common to all attachment circuits.
Note If AutoPickBDVlanId=true, be sure that an access domain is attached to the PE-POP, and a VLAN ID pool is assigned to the access domain (Step 7).
XML Examples:
•CreateEVCServiceDefn_LOCAL.xml
•CreateEVCServiceDefn_PW.xml
•CreateEVCServiceDefn_VPLS.xml
•Create_PW_EVCPolicy.xml
•CreateLocalEVCPolicy.xml
•CreateVplsEVCPolicy.xml
Step 15 Create EVC service request.
A EVC service request defines the service definition and VPN, assigns interfaces and attributes for each attachment circuit (EvcLink), and applies any template information.
|
|
|
|
|---|---|---|
createInstance |
ServiceOrder |
• • • Note • |
ServiceRequest |
• • • |
|
ServiceRequestDetails |
• – • • |
|
EvcLink |
• • • Note |
Tip Record the LocatorId value from the XML response for the service request. The Locator ID is required for subsequent service request tasks.
XML Example:
•CreateEVCServiceOrder_LOCAL.xml
•CreateEVCServiceOrder_VPLS.xml
•CreateEVCServiceOrder_PW.xml
Auditing Service Requests
A configuration audit occurs automatically each time you deploy a service request. During this configuration audit, Prime Fulfillment verifies that all Cisco IOS commands are present and that they have the correct syntax. An audit also verifies that there were no errors during deployment by examining the commands configured by the service request on the target devices. If the device configuration does not match what is defined in the service request, the audit flags a warning and sets the service request to a Failed Audit or Lost state.
If you do not want the configuration audit to occur, change the value for the Audit parameter. The Audit parameter supports these values:
•Audit—This is the default. A successfully deployed service request is automatically audited unless this flag is changed.
•NoAudit—Do not perform a configuration audit when the service request is deployed.
•ForceAudit—Perform a configuration audit even if the service request deployment is not successful.
You can use the Audit parameter with a Create, Modify, or Decommission service request or a Deployment task. See the "Service Decommission" section for more information. To perform a configuration audit as a separate task, see the "Configuration Audit" section.
Feedback