Step 1

Choose Administration > Settings > System Settings > General > Prime Data Migration Tool, and then click Launch Prime Data Migration Tool to open Prime Infrastructure - Prime Data Migration Tool page.

Step 2

Click Job history, in the top-right corner of the Prime Data Migration Tool, the Prime Data Migration Job History window appears.

Step 3

In the Prime Data Migration Job History window, do the following:

1. Click Force Sync to view the list of jobs that are force synced and the job details such as Cisco Catalyst Center IP, Start Time, End Time, Status and Info. You can click on the i icon next to the status column of the corresponding jobs to view the detailed information. You can also click on the hyperlinked completed or failed status to view the respective job summary in the Job Summary window.

2. Click Dynamic Sync to view the list of dynamically synced job details such as Cisco Catalyst Center IP, Start Time, End Time, Status, and Info. You can click on the i icon next to the status column of the corresponding jobs to view the detailed information.

3. You can search for the job history by choosing a category from the drop-down list such as Groups/Maps, Devices, ISE, CMX and Templates or by using the search box.

   If you choose Devices or ISE or CMX categories, enter the IP address in the search box and click Search to retrieve the job details.

Step 4

Click Download Logs in the top-right corner of the Prime Data Migration Tool, to download the prime migration logs in the .ZIP format.

Step 5

Click Add Cisco Catalyst Center Server.

Step 6

Enter the following Cisco Catalyst Center server details:

1. Server IP Address or Hostname.

2. Username.

3. Password.

4. Confirm Password.

Step 7

Click Save, to check server reachability.

Step 8

(Optional) Click Multi Server Settings, to archive, and restore the data that is migrated from Prime Infrastructure to Catalyst Center. It is recommended to use this option after Force Sync.

Step 9

In the Sync Settings window:

1. You can check for the Supported or Available Limits of the Cisco Catalyst Center server for the Site Groups/Site Maps , Devices, and Templates. Supported or Available Limits of Cisco Catalyst Center varies based on the Cisco Catalyst Center server model.

   The Supported/Available limits are specified in the following table:

   Table 1. Supported/ Available limits for Catalyst Center

   Catalyst Center Model	Site Groups/ Site Maps	Devices	Templates
   DN2-HW-APL DN3-HW-APL	2500	2000	1000
   DN2-HW-APL-L DN3-HW-APL-L	2500	4000	1000
   DN2-HW-APL-XL DN3-HW-APL-XL	2500	8000	1000

   Table 2. Supported/Available Limits for Catalyst Center on Esxi

   Catalyst Center on Esxi	Site Groups/Site Maps	Devices	Templates
   32vCPU/256G	2500	2000	1000

2. Check the Enables automatic synchronization of data integrated with Cisco Catalyst Center check box to automatically synchronize any updates to the set of migrated Groups, Devices and CMX from Cisco Prime Infrastructure to Cisco Catalyst Center.

3. Select the Include newly added data during dynamic synchronization check box to automatically migrate any new addition to the set of migrated Groups, Devices and CMX from Cisco Prime Infrastructure to Cisco Catalyst Center.

   Note

   Dynamic Synchronization does not support add, update or delete operations for the already migrated data and will not synchronize the data automatically for the following components: Maps CLI Templates ISE Server Maps, CLI templates, and ISE server migration is achieved only by Force Sync. This check box is enabled only if you select the Enables automatic synchronization of data integrated with Cisco Catalyst Center check box. During force synchronization, if the Enables automatic synchronization of data integrated with Cisco Catalyst Center check box is enabled, any modifications that are made through force synchronization to the Location Group and Devices entities are dynamically synced in Cisco Catalyst Center. If the Enables automatic synchronization of data integrated with Cisco Catalyst Center check box is selected, CMX is dynamically assigned to Cisco Catalyst Center floor groups, when Cisco Prime Infrastructure imports maps to CMX.

4. If you select the Enable CMX settings check box, CMX will be pushed with floor groups. If you do not select the Enable CMX settings check box, CMX data will not be pushed to the Cisco Catalyst Center server.

5. If you select the Enable ISE settings check box, ISE server details will be pushed. If you do not select the Enable ISE settings check box, ISE data will not be pushed to the Cisco Catalyst Center server.

6. Select the Migrate User Defined CLI Templates check box to migrate the user-defined CLI and/or Composite Templates to Cisco Catalyst Center.

7. Choose the Migrate CLI System Templates check box to migrate the CLI System Templates to Cisco Catalyst Center.

Step 10

Click Next to go to the Select Groups page.

Step 11

In the Select Groups window:

1. Check the Sync only new selection checkbox to migrate only the newly selected groups for migration. If you click Force sync, only newly selected groups will be migrated to Catalyst Center.

2. Uncheck the Sync only new selection checkbox to migrate only the newly selected groups and groups which is already migrated.

3. If you want to delete only the mapping from Prime data migration to Cisco Catalyst Center and retain the instances of migrated sites in the Catalyst Center for the current force sync, uncheck the Delete sites in Cisco Catalyst Center for the current Force Sync check box.

4. Check the Delete sites in Cisco Catalyst Center for the current Force Sync check box to delete the sites from Cisco Catalyst Center and remove the mapping from prime data migration to Cisco Catalyst Center for the current force sync.

   Uncheck the Delete sites in Cisco Catalyst Center for the current Force Sync check box to remove the mapping from Prime Data Migration Tool to Cisco Catalyst Center for the current force sync

5. If you want to move an entire group hierarchy to Cisco Catalyst Center, check the Replicate Parent Hierarchy check box and select the location groups in the Prime Infrastructure Location Groups pane.

   By default, when you select Site Groups, the buildings, floors, and associated maps are also selected.

   Click Select Catalyst Center Parent below the Prime Infrastructure Location Groups pane to open the Cisco Catalyst Center Site Groups window.

   Marked for Deletion label appears when you unselect an already migrated group with Delete sites in Cisco Catalyst Center for the current Force Sync check box, checked.

   Marked for Unmapping label appears when you unselect an already migrated group with Delete sites in Cisco Catalyst Center for the current Force Sync check box, unchecked.

   Select Global from the Cisco Catalyst Center Site Groups pane under which you want to move the PI groups and click OK. The selected groups will be added in the Group Movement Log pane with the label as Marked for Migration.

   Update Civic Location window pops up to enter the civic location details for the selected building, if no lcoation details are available. You can choose the Address or provide Latitude and Longitude values and click Save to update the civic details for the building which you selected.

6. If you want to move only a building or a floor to Cisco Catalyst Center under a different campus or area, click Select Catalyst Center Parent below the Prime Infrastructure Location Groups pane to open the Cisco Catalyst Center Site Groups window.

   Select a campus or an area from Cisco Catalyst Center Site Groups under which you need to move the building and select a building from Cisco Catalyst Center Site Groups under which you need to move the floor and click OK. The selected groups will be added in the Group Movement Log pane with the label as Marked for Migration.

Step 12

In the ISE & CMX Credentials window:

1. Click the ISE tab to view the ISE server details that are present in Prime Infrastructure such as:

   • Server Status

   • Server IP

   • Port

   • Server Name

   • Username

   • Shared Secret: You must ensure that this shared secret field is not empty.

   • Timeout: This value must not exceed 20.

   • Retries

   If no ISE server is present in Prime Infrastructure, a No data available message appears.

2. Click the CMX tab to can view the list of associated CMX servers for selected groups with the following details:

   • Credential Status

   • Server IP address

   • Device Name

   • Username

   • Password

   • SSH Username

   • SSH Password

   You must update the SSH Username and SSH Password, if it is not available for the respective CMX.

   If the associated CMX is not found, then click Next

   Note	When the Cisco Prime Infrastructure – Cisco Catalyst Center migration tool is active and auto sync is enabled, then CMX will be dynamically pushed to Cisco Catalyst Center floor groups. Cisco Catalyst Center will there by track the location data for assigned groups.

Step 13

If you check the Migrate User Defined CLI Templates check box or Migrate CLI System Templates check box in the Sync Settings page, then a new page Select CLI Templates appears after the CMX page.

Step 14

In the Select CLI Templates window:

1. Non-Migrated templates list all the available CLI templates, Composite User Defined templates, and CLI System templates available in Prime Infrastructure. Choose the templates that you want to migrate to Cisco Catalyst Center.

2. Migrated templates list all the migrated templates available in Cisco Catalyst Center. You can either update or delete these templates.

   Note	By default all the rows are selected. Selected templates from the list are updated and the deselected templates are deleted from Cisco Catalyst Center.

Step 15

Click Next.

Step 16

In the Summary window:

1. You can view the overall summary of selected location groups, devices, associated maps, user-defined templates, CLI System templates, CMX servers, and ISE servers before migrating to the Cisco Catalyst Center.

2. Click the CLI templates tab to view the selected CLI templates listed here. Based on the device selection in the groups you can Add, Update, or Delete the CLI templates, Composite user defined templates, and CLI System templates in Cisco Catalyst Center.

3. In the Sync Settings tab, you can view the summary of the sync status.

Step 17

Click Force Sync to push data to the Cisco Catalyst Center server after the first migration.