Cisco Prime Provisioning API Programmer Guide, 7.2

EVC Service Definitions
EVC Service Requests
End-to-End Provisioning Process

EVC Provisioning

This chapter describes the provisioning support for EVC (flexible user network interface/Ethernet Virtual Circuit) provided in Cisco Prime Provisioning.

The following EVC support is available:

Allows the “service designers” to plan the services that are specific to the services offered through the EVC Policy. This single policy is flexible enough to cater to different service offerings using the EVC architecture.
Allows service designers to utilize most of the EVC features in a flexible manner, closely matching the hardware/platform flexibilities.
Allows operators to deploy services as per the created EVC policies by creating service requests.

Note that CE devices are not supported.

To provision EVC using Prime Provisioning APIs, you need an EVC service definition and an EVC service request. The service definition specifies the core type, policy subtype, and common device properties. The service request defines the service definition to use, VPNs, attributes for each interface in the EVC link, and template information.

This chapter describes EVC service concepts and the steps required to provision EVC services using the Prime Provisioning API. The provisioning example (see End-to-End Provisioning Process) includes all steps from creating the inventory to auditing the service deployment.

For a detailed description of supported EVC features, policy attribute definitions, GUI implementation, and other information, see the Cisco Prime Provisioning 7.2 User Guide.

This chapter contains the following sections:

EVC Service Definitions

A EVC service definition specifies the core type, policy subtype, and the attributes common to all EVC attachment circuits.

This section lists the supported service definitions, service orders, and policies and includes corresponding examples.

To provision EVC using Prime Provisioning API, an EVC service policy and an EVC service request are required and only one subtype will be defined and of type EVC.

The EVC service policy/service definition specifies the attributes related to the end-to-end EVC links and non-EVC links. The service request defines the device interfaces for each EVC/non-EVC link connection and can optionally override policy attributes in each of the corresponding links.

When you deploy an EVC service request using a service order, the attributes specified in the service definition are applied to the devices and interfaces listed in the service request, along with the attributes for each of the EVC/non-EVC links.

Supported Service Definitions and Service Orders

Prime Provisioning supports the following EVC features:

Creating:

– EVC Service Definition/Policy

– EVC Service Order/Request

Modifying:

– EVC Service Definition

– EVC Service Order/Request

Deleting:

– EVC Service Definition/Policy

– EVC Service Order/Request

Viewing:

– EVC Service Definition

– EVC Service Request

The above operations are supported for policies and service requests, which are created to provision a variety of network configurations.

Template-based support is available for EVC Policy and service requests.

Policy Types

For EVC, the following policy types are supported:

Ethernet—Ethernet to Ethernet services can be configured using this policy type.
ATM-Ethernet interworking—ATM to Ethernet services can be configured using this policy type. This new policy type is depicted in two of the policy XML examples.

MPLS Core Connectivity Types

There are three MPLS core connectivity types:

PSEUDOWIRE—Allows connectivity between two N-PEs across the MPLS core.

This option does not limit the service to point-to-point (E-Line). This is because even with the PSEUDOWIRE option selected, multiple CEs can still be connected to a bridge domain on one or both sides of the pseudowire.

VPLS—Allows connectivity between multiple N-PEs across the MPLS core.

There is no limit on the number of N-PEs across the MPLS core within a service request. However, many service requests can refer to the same customer-associated VPN.

LOCAL—For local connect cases in which no connectivity is required across the MPLS core.

In the following, policy examples are given for each of these connectivity types.

Policy Examples

The following constitute XML policy examples for the three connectivity types that are supported across the MPLS core:

Creating a Local Connect Policy

In this partial example, an EVC policy is created using local connect. The TransportType attribute is set to LOCAL as shown below.

See the full example in the API Programmer Reference.

Example: CreateEVCServiceDefn_LOCAL.xml

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ETHERNET</value>

</item>

<name xsi:type="xsd:string">TransportType</name>

<value xsi:type="xsd:string">LOCAL</value>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

Creating a Pseudowire Policy

In this partial example, a EVC policy is created using pseudowire. Here, the TransportType attribute is set to Pseudowire, indicated with bold text below.

See the full example in the API Programmer Reference.

Example: CreateEVCServiceDefn_PW.xml

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ETHERNET</value>

</item>

<name xsi:type="xsd:string">TransportType</name>

<value xsi:type="xsd:string">PSEUDOWIRE</value>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

Creating a VPLS Policy

In this partial example, a EVC policy is created using the VPLS transport type.

See the full example in the API Programmer Reference.

Example: CreateVplsEVCPolicy.xml

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ETHERNET</value>

</item>

<name xsi:type="xsd:string">TransportType</name>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

Creating a Local Connect Policy with ATM/Ethernet internetworking

In this example, a EVC policy is created using local connect with ATM/Ethernet internetworking.

The ATM_ETHERNET policy attribute is highlighted with bold in this example.

Example: ATM_ETHERNET_VC-Pol-LOCAL_Create-NBI-4.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:createInstance>

<className xsi:type="xsd:string">ServiceDefinition</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">ATM_ETHERNET_Local_VC</value>

</item>

</item>

<name xsi:type="xsd:string">Organization</name>

<value xsi:type="xsd:string">Customer1</value>

</item>

</properties>

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">TransportType</name>

<value xsi:type="xsd:string">LOCAL</value>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ATM_ETHERNET</value>

</item>

<name xsi:type="xsd:string">TemplateEnabled</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AtmEncapsulationType</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AtmTransportMode</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PortSecurity</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniProtocolTunneling</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniKeepAlive</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniSpeed</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniDuplex</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseExistingACLName</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

<name xsi:type="xsd:string">DirectConnect</name>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickEsiId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EnablePWRedundancy</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PwTunnelSelection</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickBDVlanId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickEsiName</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item >

<name xsi:type="xsd:string">AllowBothTags</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">InnerVlanRanges</name>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

<name xsi:type="xsd:string">PushOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopOuter</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopInner</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseEVC</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

<name xsi:type="xsd:string">UseBD</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">DOT1QTRUNK</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

</properties>

<className xsi:type="xsd:string">PolicyTemplate</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RoleType</name>

</item>

<name xsi:type="xsd:string">DatafileName</name>

<value xsi:type="xsd:string">SampleData0</value>

</item>

<name xsi:type="xsd:string">DatafilePath</name>

<value xsi:type="xsd:string">Audit/Set-Audit-Rule</value>

</item>

<name xsi:type="xsd:string">TemplateAction</name>

<value xsi:type="xsd:string">APPEND</value>

</item>

<name xsi:type="xsd:string">TemplateActive</name>

</item>

</properties>

</objectPath>

</ns1:createInstance>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Policy with ATM/Ethernet Internetworking

In this example, a EVC policy is created using pseudowire with ATM/Ethernet internetworking.

The ATM_ETHERNET policy attribute is highlighted with bold in this example.

Example: ATM_ETHERNET_VC-Pol-PW_Create-NBI-4.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:createInstance>

<className xsi:type="xsd:string">ServiceDefinition</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">ATM_ETHERNET_PW_VC</value>

</item>

</item>

<name xsi:type="xsd:string">Organization</name>

<value xsi:type="xsd:string">Customer1</value>

</item>

</properties>

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">TransportType</name>

<value xsi:type="xsd:string">PSEUDOWIRE</value>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ATM_ETHERNET</value>

</item>

<name xsi:type="xsd:string">TemplateEnabled</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AtmEncapsulationType</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AtmTransportMode</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PortSecurity</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniProtocolTunneling</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniKeepAlive</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniSpeed</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniDuplex</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseExistingACLName</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

<name xsi:type="xsd:string">DirectConnect</name>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickEsiId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EnablePWRedundancy</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PwTunnelSelection</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickBDVlanId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickEsiName</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item >

<name xsi:type="xsd:string">AllowBothTags</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">InnerVlanRanges</name>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

<name xsi:type="xsd:string">PushOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopOuter</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopInner</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseEVC</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

<name xsi:type="xsd:string">UseBD</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">DOT1QTRUNK</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

</properties>

<className xsi:type="xsd:string">PolicyTemplate</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RoleType</name>

</item>

<name xsi:type="xsd:string">DatafileName</name>

<value xsi:type="xsd:string">SampleData0</value>

</item>

<name xsi:type="xsd:string">DatafilePath</name>

<value xsi:type="xsd:string">Audit/Set-Audit-Rule</value>

</item>

<name xsi:type="xsd:string">TemplateAction</name>

<value xsi:type="xsd:string">APPEND</value>

</item>

<name xsi:type="xsd:string">TemplateActive</name>

</item>

</properties>

</objectPath>

</ns1:createInstance>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Policy Setting the MTU Size

In this example, an EVC policy is created in which an attribute is set for the MTU size for a pseudowire service. The MTU attribute in this example is set to 1560. Note that the attribute editable for the MTU size is set to true.

Example: CreateEvcPolicySetMTU.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

sessiontoken="36B0E5AD24D73FD91C3E34023A3ED367"/>

</soapenv:Header>

<soapenv:Body>

<ns1:createInstance>

<className xsi:type="xsd:string">ServiceDefinition</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ETHERNET</value>

</item>

<name xsi:type="xsd:string">TransportType</name>

<value xsi:type="xsd:string">PSEUDOWIRE</value>

</item>

<name xsi:type="xsd:string">StaticPw</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">DirectConnect</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickEsiId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickBDVlanId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AllowBothTags</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item><br/>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">OuterVlanRanges</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EnablePWRedundancy</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PwTunnelSelection</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseEVC</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UseBD</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">DOT1QTRUNK</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

</properties>

</objectPath>

</ns1:createInstance>

<!-- <ns1:modifyInstance>

<className xsi:type="xsd:string">ServiceDefinition</className>

<keyProperties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">d-evc-nbi-innerrangesEdit</value>

</item>

</item>

</keyProperties>

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AllowBothTags</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">OuterVlanRanges</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">InnerVlanRanges</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

</properties>

</objectPath>

</ns1:modifyInstance>

-->

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Head-End Policy for Access into L3VPN

In the following example, a pseudowire head-end policy is created for pseudowire access into L3VPN. The significant attribute is ConfigurePseudowireHE, which in the example is set to true.

Example: CreateEvcPolicy.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

sessiontoken="8F872554E9298441A0CAC4630D37523F"/>

</soapenv:Header>

<soapenv:Body>

<ns1:createInstance>

<className xsi:type="xsd:string">ServiceDefinition</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ETHERNET</value>

</item>

<name xsi:type="xsd:string">TransportType</name>

<value xsi:type="xsd:string">PSEUDOWIRE</value>

</item>

<name xsi:type="xsd:string">StaticPw</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">L2VpnGrpName</name>

</item>

<name xsi:type="xsd:string">ConfigurePseudowireHE</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">DirectConnect</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickEsiId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickBDVlanId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AllowBothTags</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">OuterVlanRanges</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EnablePWRedundancy</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PwTunnelSelection</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseEVC</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UseBD</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">DOT1QTRUNK</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

</properties>

</objectPath>

</ns1:createInstance>

<!-- <ns1:modifyInstance>

<className xsi:type="xsd:string">ServiceDefinition</className>

<keyProperties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">d-evc-nbi-innerrangesEdit</value>

</item>

</item>

</keyProperties>

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AllowBothTags</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">OuterVlanRanges</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">InnerVlanRanges</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

</properties>

</objectPath>

</ns1:modifyInstance>

-->

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Policy With Reserved Bandwidth

This example shows how to set a reserved bandwidth for a pseudowire policy. The significant attribute is ConfigurePseudowireBW, which in the example is set to 242. The full XML example is found in the Cisco Prime Provisioning API 7.2 Programmer Reference.

Example: CreateEvcPwPolicy_ResBw.xml

<name xsi:type="xsd:string">ConfigurePseudowireBW</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

Configuring an SVI/EVC Hybrid Scenario

In the following example, a EVC policy is created with the EVC/SVI Hybrid scenario. The attribute relevant for the EVC/SVI Hybrid scenario is XconnectOnSVI (in bold below), which in the example is set to true.

Example: CreateEVCServiceDefn_PW_1.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:createInstance>

<className xsi:type="xsd:string">ServiceDefinition</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ETHERNET</value>

</item>

<name xsi:type="xsd:string">TransportType</name>

<value xsi:type="xsd:string">PSEUDOWIRE</value>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">DirectConnect</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickEsiId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickBDVlanId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EnablePWRedundancy</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PwTunnelSelection</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AllowBothTags</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseEVC</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UseBD</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">DOT1QTRUNK</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

</properties>

</objectPath>

</ns1:createInstance>

</soapenv:Body>

</soapenv:Envelope>

Creating a Policy for Specifying Service Instance Name

The following example shows how to create a policy that specifies a service instance name for EVC service requests. The attribute used to specify a service instance name in EVC service requests is AutoPickEsiName (in bold below), which in the example is set to true.

Example: CreateEVCServiceDefn_PW_2.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:createInstance>

<className xsi:type="xsd:string">ServiceDefinition</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ETHERNET</value>

</item>

<name xsi:type="xsd:string">TransportType</name>

<value xsi:type="xsd:string">PSEUDOWIRE</value>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">DirectConnect</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickEsiId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickBDVlanId</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EnablePWRedundancy</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickEsiName</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item >

<name xsi:type="xsd:string">PwTunnelSelection</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AllowBothTags</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseEVC</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UseBD</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">DOT1QTRUNK</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

</properties>

</objectPath>

</ns1:createInstance>

</soapenv:Body>

</soapenv:Envelope>

Creating a Multi-Segment Pseudowire Policy

The following example shows how to create a Multi-Segment PseudoWire (MSPW) policy.

Example: CreateEVC_MSPW.xml

<?xml version="1.0" encoding="utf-8"?>

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0" xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1" />

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<name xsi:type="xsd:string">Description</name>

<value xsi:type="xsd:string">EVC-PW-MS-default-checking-rob</value>

</item>

<name xsi:type="xsd:string">ServiceDefinition</name>

<value xsi:type="xsd:string">EVC-PW-MS-default</value>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">UseBackupVCID</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">BackupVCID</name>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet4/15</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<name xsi:type="xsd:string">AutoPickServiceInstName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet2/0/14</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<name xsi:type="xsd:string">AutoPickServiceInstName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcPseudowireNeighborLinks</className>

<name xsi:type="xsd:string">PathXml</name>

<![CDATA[

<value>Required NE/Link</value>

<value>Excluded NE/Link</value>

</valueMap>

</field>

</pwfield>

</pwfield>

</field>

<field id="reqExElementpane01_group0widget1" name="reqExElement" position="pane01_group0widget1" required="true" resource="devicesAndTpTunnels" title="" type="textpicker" value="isc-cl-test-l2-7600-6:Tunnel-tp7667(7667)<===>cl-test-l2-7600-5:Tunnel-tp7667(7667)"/>

<value>Working Path</value>

</valueMap>

</field>

</group>

</section>

</service>]]>

</value>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating an EVC VPLS Policy for E-TREE

In the following example, an EVC VPLS policy is created to identify root and leaf nodes in an ETREE. The key attributes are Etree and EtreeRole, to which the following applies:

For the Etree attribute, the value should be either true or false.
If Etree is set to true, set the EtreeRole attribute. If false, this is not required.
The EtreeRole attribute can be either “ROOT” (as in the example below) or “LEAF”.

Example: CreateEVCVplsPolicy_Etree.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

sessiontoken="83A0FC53D02FFC8ED19EC1A4D4635D3E"/>

</soapenv:Header>

<soapenv:Body>

<ns1:createInstance>

<className xsi:type="xsd:string">ServiceDefinition</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">doc_vplsHEad4</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceDefinitionDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SubType</name>

</item>

<name xsi:type="xsd:string">AccessType</name>

<value xsi:type="xsd:string">ETHERNET</value>

</item>

<name xsi:type="xsd:string">TransportType</name>

</item>

<name xsi:type="xsd:string">PortSecurity</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniProtocolTunneling</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniKeepAlive</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniSpeed</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UniDuplex</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseExistingACLName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanTranslationType</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">VlanTranslationNode</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">DirectConnect</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickEsiId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutoPickBDVlanId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">Etree</name>

<name xsi:type="xsd:string">editable</name>

<value xsi:type="xsd:string">false</value>

</qualifier>

</item>

<name xsi:type="xsd:string">EtreeRole</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">ConfigurePseudowireHE</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCId</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AllowBothTags</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PushInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">PopInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateInner</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">TranslateOuter</name>

<value xsi:type="xsd:string">false</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">UseEVC</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UseBD</name>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">DOT1QTRUNK</value>

<name xsi:type="xsd:string">editable</name>

</qualifier>

</item>

</properties>

</objectPath>

</ns1:createInstance>

</soapenv:Body>

</soapenv:Envelope>

Policy Examples in the API Programmer Reference

The following policy API XMLs are included in the Cisco Prime Provisioning API 7.2 Programmer Reference:

Create_ATM_ETHERNET_VC-Pol-LOCAL.xml
Create_ATM_ETHERNET_VC-Pol-PW.xml
CreateLocalEVCPolicy.xml
CreateVplsEVCPolicy.xml
Create_PW_EVCPolicy.xml
CreateEVCServiceDefn_LOCAL.xml
CreateEVCServiceDefn_PW.xml
CreateEVCServiceDefn_VPLS.xml
CreateMPLSServiceDefn_Bundle_PE_CE_IPV4_IPV6.xml
CreateMPLSServiceDefn_Bundle_PE_NO_CE_IPV4_IPV6.xml
CreateEVCPseudoPolicy_withTemplates.xml
CreateEVCVplsPolicy_wthTemplates.xml
DeleteEVCServiceDefn.xml
ViewEVCServiceDefn.xml
CreateEvcPolicySetMTU.xml
CreateEvcPolicy-pwHE.xml

EVC Service Requests

With a EVC service request, you can configure interfaces on an N-PE to support EVC infrastructure features.

Before creating a service request, a service policy has to be defined. Use a predefined policy template as is or with modifications to create a service request, and deploy the service. For information on EVC policies, see EVC Service Definitions.

Overview

A EVC service request defines the service definition and VPN to use, assigns interfaces and attributes for each attachment circuit (EvcLink), and applies template information.

Note The attachment circuit, or EvcLink, defines the layer 2 path from the U-PE to the NPE, including any intermediate devices.

When you deploy a EVC service request using a service order, the attributes specified in the service definition are applied to the devices and interfaces defined in the service request, along with the link attributes for each attachment circuit.

The service request link attributes include any parameters marked as editable in the service definition and link parameters specific to each attachment circuit.

The following XML example shows a partial list of the properties that can be specified for the attachment circuit EvcLink.

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/3</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

</properties>

</objectPath>

End-To-End Wires

An end-to-end wire is the link from one endpoint through the service provider cloud to another endpoint. In most cases, these links are from CE to CE. An attachment circuit is the link from the CE to the PE. If no is CE present, the attachment circuit link is from PE-CLE to PE-CLE.

The following network diagrams depict the three types of connectivity:

Note ATM/Ethernet internetworking only supports pseudowire and local connect.

Pseudowire Network Diagram

In the EVC network example shown in Figure 9-1, there are two EvcLinks:

ence132 to enswosr1
ence61 to enswosr2.

Figure 9-1 End to End Wire Network Example - Pseudowire

VPLS Network Diagram

In the EthernetEVCS network example shown in Figure 9-2, there are three EvcLinks:

ence132 to enswosr1
ence61 to enswosr2
ence51 to enpe5.

Figure 9-2 End to End Wire Network Example - VPLS

Local Connect Network Diagram

In the EthernetEVC network example shown in Figure 9-3, there are two EvcLinks:

ence132 to enswosr1
ence51 to enswosr1.

Figure 9-3 End to End Wire Network Example - Local Connect

Service Request Examples

The following XML examples illustrate how you work with service requests for EVC APIs. They also demonstrate the kinds of properties (attributes) that need to be specified for each request.

The first three are XML examples of service requests for the three supported connectivity types:

Creating a Local Connect Service Request

In this example, a EVC service request is created using local connect. The highlighted attribute ServiceDefinition is set to doc_local below.

Example: CreateEVCServiceOrder_LOCAL.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<value xsi:type="xsd:string">doc_local</value>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7600-3</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">FastEthernet2/3</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-3750-6</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">FastEthernet1/0/7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutopickOuterVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

<value xsi:type="xsd:string">false</value>

</item>

</properties>

</objectPath>

<!-- <objectPath xsi:type="ns1:CIMObjectPath">

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath> -->

<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ProtocolTunnelling</name>

</item>

<name xsi:type="xsd:string">CdpEnable</name>

</item>

<name xsi:type="xsd:string">VtpEnable</name>

</item>

<name xsi:type="xsd:string">StpEnable</name>

</item>

<name xsi:type="xsd:string">VtpDropThreshold</name>

</item>

<name xsi:type="xsd:string">CdpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpThreshold</name>

</item>

<name xsi:type="xsd:string">VtpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpThreshold</name>

</item>

<name xsi:type="xsd:string">RecoveryInterval</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">SpeedType</name>

</item>

<name xsi:type="xsd:string">DuplexType</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">ViolationActionType</name>

<value xsi:type="xsd:string">RESTRICT</value>

</item>

<name xsi:type="xsd:string">Aging</name>

</item>

<name xsi:type="xsd:string">MacAddress</name>

</item>

<name xsi:type="xsd:string">BroadcastTraffic</name>

</item>

<name xsi:type="xsd:string">MulticastTraffic</name>

</item>

<name xsi:type="xsd:string">UnicastTraffic</name>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

</item>

<name xsi:type="xsd:string">DisableCDP</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

<value xsi:type="xsd:string">Description</value>

</item>

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">UniKeepAlive</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Service Request

In this example, a EVC service request is created using pseudowire.

Example: CreateEVCServiceOrder_PW.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">CarrierId</name>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">AutopickVCID</name>

</item>

<name xsi:type="xsd:string">UseBackupVCID</name>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/3</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

</properties>

</objectPath>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-3750-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">FastEthernet1/0/8</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ProtocolTunnelling</name>

</item>

<name xsi:type="xsd:string">VtpDropThreshold</name>

</item>

<name xsi:type="xsd:string">CdpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpThreshold</name>

</item>

<name xsi:type="xsd:string">VtpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpEnable</name>

</item>

<name xsi:type="xsd:string">VtpEnable</name>

</item>

<name xsi:type="xsd:string">StpEnable</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">SpeedType</name>

</item>

<name xsi:type="xsd:string">DuplexType</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">MacAddress</name>

</item>

<name xsi:type="xsd:string">Aging</name>

</item>

<name xsi:type="xsd:string">ViolationActionType</name>

<value xsi:type="xsd:string">RESTRICT</value>

</item>

<name xsi:type="xsd:string">BroadcastTraffic</name>

</item>

<name xsi:type="xsd:string">MulticastTraffic</name>

</item>

<name xsi:type="xsd:string">UnicastTraffic</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a VPLS Service Request

In this example, a EVC service request is created using VPLS.

Example: CreateEVCServiceOrder_VPLS.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">AutopickVCID</name>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-2</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/1</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-3750-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">FastEthernet1/0/12</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ProtocolTunnelling</name>

</item>

<name xsi:type="xsd:string">VtpDropThreshold</name>

</item>

<name xsi:type="xsd:string">CdpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpThreshold</name>

</item>

<name xsi:type="xsd:string">VtpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpEnable</name>

</item>

<name xsi:type="xsd:string">VtpEnable</name>

</item>

<name xsi:type="xsd:string">StpEnable</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">SpeedType</name>

</item>

<name xsi:type="xsd:string">DuplexType</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">ViolationActionType</name>

<value xsi:type="xsd:string">RESTRICT</value>

</item>

<name xsi:type="xsd:string">Aging</name>

</item>

<name xsi:type="xsd:string">MacAddress</name>

</item>

<name xsi:type="xsd:string">BroadcastTraffic</name>

</item>

<name xsi:type="xsd:string">MulticastTraffic</name>

</item>

<name xsi:type="xsd:string">UnicastTraffic</name>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

</item>

<name xsi:type="xsd:string">DisableCDP</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

<value xsi:type="xsd:string">Description</value>

</item>

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">UniKeepAlive</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Modifying a EVC Service Request

In this example, a EVC service request is modified.

Example: ModifyEVCServiceOrder.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2008-04-15T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">CarrierId</name>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">modifyInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<keyProperties xsi:type="ns1:CIMKeyPropertyList"

soapenc:arrayType="ns1:CIMKeyProperty[]">

<name xsi:type="xsd:string">LocatorId</name>

</item>

</keyProperties>

<!-- delete instance -- >

<className xsi:type="xsd:string">EvcLink</className>

<keyProperties xsi:type="ns1:CIMKeyPropertyList"

soapenc:arrayType="ns1:CIMKeyProperty[]">

<name xsi:type="xsd:string">LocatorId</name>

</item>

</keyProperties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<keyProperties xsi:type="ns1:CIMKeyPropertyList"

soapenc:arrayType="ns1:CIMKeyProperty[]">

<name xsi:type="xsd:string">LocatorId</name>

</item>

</keyProperties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">VlanTranslationNode</name>

</item>

<name xsi:type="xsd:string">VlanTranslationType</name>

</item>

<name xsi:type="xsd:string">OuterVlanID</name>

</item>

<name xsi:type="xsd:string">CeVlanID</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ProtocolTunnelling</name>

</item>

<name xsi:type="xsd:string">VtpDropThreshold</name>

</item>

<name xsi:type="xsd:string">CdpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpThreshold</name>

</item>

<name xsi:type="xsd:string">VtpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpEnable</name>

</item>

<name xsi:type="xsd:string">VtpEnable</name>

</item>

<name xsi:type="xsd:string">StpEnable</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

<name xsi:type="xsd:string">MacAddress</name>

</item>

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">UserDefinedACLName</name>

</item> -->

<name xsi:type="xsd:string">BroadcastTraffic</name>

</item>

<name xsi:type="xsd:string">Aging</name>

</item>

<name xsi:type="xsd:string">UniKeepAlive</name>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

</item>

<name xsi:type="xsd:string">ViolationActionType</name>

<value xsi:type="xsd:string">PROTECT</value>

</item>

<name xsi:type="xsd:string">FilterBPDU</name>

</item>

<name xsi:type="xsd:string">DuplexType</name>

</item>

<name xsi:type="xsd:string">UnicastTraffic</name>

</item>

<name xsi:type="xsd:string">MulticastTraffic</name>

</item>

<name xsi:type="xsd:string">SpeedType</name>

</item>

</properties>

</objectPath>

<!-- <objectPath subAction="createInstance" xsi:type="ns1:CIMObjectPath">

<className xsi:type="xsd:string">EvcUNIMacACLAddresses</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">MacAddress</name>

</item>

<name xsi:type="xsd:string">Permission</name>

<value xsi:type="xsd:string">permit</value>

</item>

<name xsi:type="xsd:string">MacAclRange</name>

</item>

</properties>

</objectPath> -->

<className xsi:type="xsd:string">EvcSecureMacAddress</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">MacAddress</name>

</item>

</properties>

</objectPath>

<!-- <objectPath subAction="createInstance" xsi:type="ns1:CIMObjectPath">

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/9</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">MatchInnerVlan</name>

<value xsi:type="xsd:string">false</value>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ProtocolTunnelling</name>

</item>

<name xsi:type="xsd:string">VtpDropThreshold</name>

</item>

<name xsi:type="xsd:string">CdpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpThreshold</name>

</item>

<name xsi:type="xsd:string">VtpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpEnable</name>

</item>

<name xsi:type="xsd:string">VtpEnable</name>

</item>

<name xsi:type="xsd:string">StpEnable</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

</objectPath> -->

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating Access Ring with two NPEs

In the following three XMLs, a two calls for setting up an access ring are depicted. It is done using the following sequence:

1. Create Ring with Two NPE’s - CreateRing.xml

2. Create NPC - CreateNamedPhysicalCircuitRingExisting.xml

Both examples are depicted in the following.

Example: CreateRing.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:createInstance>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<className xsi:type="xsd:string">PhysicalLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SrcDevice</name>

<value xsi:type="xsd:string">iscind-3750-4</value> </item>

<name xsi:type="xsd:string">DestDevice</name>

<value xsi:type="xsd:string">iscind-7600-3</value> </item>

<name xsi:type="xsd:string">SrcIfName</name>

<value xsi:type="xsd:string">FastEthernet1/0/16</value> </item>

<name xsi:type="xsd:string">DestIfName</name>

<value xsi:type="xsd:string">FastEthernet2/13</value> </item>

</properties>

</objectPath>

<className xsi:type="xsd:string">PhysicalLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SrcDevice</name>

<value xsi:type="xsd:string">iscind-7600-3</value> </item>

<name xsi:type="xsd:string">DestDevice</name>

<value xsi:type="xsd:string">iscind-7609-2</value> </item>

<name xsi:type="xsd:string">SrcIfName</name>

<value xsi:type="xsd:string">LoopBack1000</value> </item>

<name xsi:type="xsd:string">DestIfName</name>

<value xsi:type="xsd:string">LoopBack100</value> </item>

</properties>

</objectPath>

<className xsi:type="xsd:string">PhysicalLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SrcDevice</name>

<value xsi:type="xsd:string">iscind-7609-2</value> </item>

<name xsi:type="xsd:string">DestDevice</name>

<value xsi:type="xsd:string">iscind-3750-4</value> </item>

<name xsi:type="xsd:string">SrcIfName</name>

<value xsi:type="xsd:string">GigabitEthernet1/0/4</value> </item>

<name xsi:type="xsd:string">DestIfName</name>

<value xsi:type="xsd:string">FastEthernet1/0/18</value> </item>

</properties>

</objectPath>

</properties>

</objectPath>

</ns1:createInstance>

</soapenv:Body>

</soapenv:Envelope>

Creating NPC

In this second step, an NPC (Named Physical Circuit) is configured before the access ring service request can be created.

Example: CreateNamedPhysicalCircuitRingExisting.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:createInstance>

<className xsi:type="xsd:string">NamedPhysicalCircuit</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</properties>

<className xsi:type="xsd:string">NamedPhysicalCircuitRing</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">LocatorId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">PhysicalLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SrcDevice</name>

<value xsi:type="xsd:string">iscind-3750-4</value> </item>

<name xsi:type="xsd:string">DestDevice</name>

<value xsi:type="xsd:string">iscind-7600-2</value> </item>

<name xsi:type="xsd:string">SrcIfName</name>

<value xsi:type="xsd:string">FastEthernet1/1</value> </item>

<name xsi:type="xsd:string">DestIfName</name>

<value xsi:type="xsd:string">FastEthernet3/1</value> </item>

</properties>

</objectPath>

</ns1:createInstance>

</soapenv:Body>

</soapenv:Envelope>

Configuring an SVI/EVC Hybrid Scenario Service Request

The following is an example of how to configure a hybrid EVC/SVI scenario in a EVC service request.

If XConnectOnSVI is enabled, the forwarding commands will be configured under SVI for both flex and non-flex. If it is disabled, the forwarding commands will be configured under service instance if it is an EVC link. If the link is a non-flex link, these commands will be configured under a subinterface.

The attribute relevant for the EVC/SVI Hybrid scenario is XconnectOnSVI (in bold below), which in the example is set to true

Example: CreateEVCServiceOrder_PW_1.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">CarrierId</name>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">AutopickVCID</name>

</item>

<name xsi:type="xsd:string">UseBackupVCID</name>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

<name xsi:type="xsd:string">Description</name>

<value xsi:type="xsd:string">BD=T,SVI = F Flex and SVI=T,Non-Flex created thru NBI</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-2</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/8</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-3750-2</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">FastEthernet1/0/4</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ProtocolTunnelling</name>

</item>

<name xsi:type="xsd:string">VtpDropThreshold</name>

</item>

<name xsi:type="xsd:string">CdpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpThreshold</name>

</item>

<name xsi:type="xsd:string">VtpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpEnable</name>

</item>

<name xsi:type="xsd:string">VtpEnable</name>

</item>

<name xsi:type="xsd:string">StpEnable</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">SpeedType</name>

</item>

<name xsi:type="xsd:string">DuplexType</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">MacAddress</name>

</item>

<name xsi:type="xsd:string">Aging</name>

</item>

<name xsi:type="xsd:string">ViolationActionType</name>

<value xsi:type="xsd:string">RESTRICT</value>

</item>

<name xsi:type="xsd:string">BroadcastTraffic</name>

</item>

<name xsi:type="xsd:string">MulticastTraffic</name>

</item>

<name xsi:type="xsd:string">UnicastTraffic</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Specifying Service Instance Name for EVC Service Requests

The following is an example of how to specify a service instance name for EVC service requests. The attributes relevant for the Service Instance Name are ServiceInstName and AutoPickServiceInstName (both in bold below), which in the example are set to manualNameNBI4 and false respectively.

Example: CreateEVCServiceOrder_PW_2.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<!-- item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">CarrierId</name>

</item -->

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<!-- item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">AutopickVCID</name>

</item -->

<name xsi:type="xsd:string">UseSVI</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-2</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/12</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceInstName</name>

<value xsi:type="xsd:string">manualNameNBI4</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-2</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/13</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceInstName</name>

<value xsi:type="xsd:string">manualNameNBI4</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Local Connect Service Request for IOS-XR using Bridge Domain

The following is an example of how to create a EVC bridge domain service request using local connect with IOS XR. The attributes relevant for the bridge domain feature are BridgeGroupName, BridgeDomainName, UsePwClass, and PwClassId (all in bold below).

Example: CreateEVCSR_IOSXR_Local_With_BridgeDomain.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<value xsi:type="xsd:string">Policy1</value>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/0/0/36</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">BridgeGroupName</name>

<value xsi:type="xsd:string">SampleBG1</value>

</item>

<name xsi:type="xsd:string">BridgeDomainName</name>

<value xsi:type="xsd:string">SampleBD1</value>

</item>

<name xsi:type="xsd:string">UsePwClass</name>

</item>

<name xsi:type="xsd:string">PwClassId</name>

</item>

<!--<item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">L2VpnGrpName</name>

<value xsi:type="xsd:string">VPNSC</value>

</item>

<name xsi:type="xsd:string">ElineName</name>

<value xsi:type="xsd:string">thfda</value>

</item> -->

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>-->

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">ServiceInstID</name>

</item>-->

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/0/0/34</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">BridgeGroupName</name>

<value xsi:type="xsd:string">SampleBG1</value>

</item>

<name xsi:type="xsd:string">BridgeDomainName</name>

<value xsi:type="xsd:string">SampleBD1</value>

</item>

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">L2VpnGrpName</name>

<value xsi:type="xsd:string">VPNSC</value>

</item>

<name xsi:type="xsd:string">ElineName</name>

<value xsi:type="xsd:string">gfhghf</value>

</item> -->

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>-->

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">ServiceInstID</name>

</item>-->

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Service Request Setting the MTU Size

In this example, an EVC service request is created in which an attribute is set for the MTU size for a pseudowire service. The highlighted MTU attribute in this example is set to 1500.

Example: CreateEvcSR-SetMTU.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="971A089D9C0580746649BD5ABF06B8DD"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<!-- <action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">AnyName</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>-->

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">AnyName</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

</item>

<name xsi:type="xsd:string">UseSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/18</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">UNTAGGED</value>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UseSplitHorizon</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>-->

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">TranslateOuterVlanId</name>

</item>

<name xsi:type="xsd:string">TranslateInnerVlanId</name>

</item>

</properties>

</objectPath>

<!-- <objectPath xsi:type="ns1:CIMObjectPath">

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet5/15</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">UseUpeServiceInst</name>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">TranslateOuterVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">TranslateInnerVlanId</name>

</item>

<name xsi:type="xsd:string">TranslateOuterVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ProtocolTunnelling</name>

</item>

<name xsi:type="xsd:string">VtpDropThreshold</name>

</item>

<name xsi:type="xsd:string">CdpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpThreshold</name>

</item>

<name xsi:type="xsd:string">VtpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpEnable</name>

</item>

<name xsi:type="xsd:string">VtpEnable</name>

</item>

<name xsi:type="xsd:string">StpEnable</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">SpeedType</name>

</item>

<name xsi:type="xsd:string">DuplexType</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">MacAddress</name>

</item>

<name xsi:type="xsd:string">Aging</name>

</item>

<name xsi:type="xsd:string">ViolationActionType</name>

<value xsi:type="xsd:string">RESTRICT</value>

</item>

<name xsi:type="xsd:string">BroadcastTraffic</name>

</item>

<name xsi:type="xsd:string">MulticastTraffic</name>

</item>

<name xsi:type="xsd:string">UnicastTraffic</name>

</item>

</properties>

</objectPath>

</objectPath> -->

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Service Request with P2P E-line Name

In the following example, an EVC service request with pseudowire and p2p e-line name is created. The attributes relevant for the bridge domain feature are L2VpnGrpName, ElineName, UsePwClass, and PwClassId (all in bold below).

UsePwClass and PwClassId are supported only for IOS XR devices and serve to associate the PW class inventories created from the CreatePWclass.xml API.

Example: CreateEVCSR_IOSXR_PW_With_p2p_Elinename.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<value xsi:type="xsd:string">Policy2</value>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">UseSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutopickVCID</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/0/0/36</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UsePwClass</name>

</item>

<name xsi:type="xsd:string">PwClassId</name>

</item>

<name xsi:type="xsd:string">L2VpnGrpName</name>

<value xsi:type="xsd:string">VPNSC</value>

</item>

<name xsi:type="xsd:string">ElineName</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>-->

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">ServiceInstID</name>

</item>-->

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/1/0/34</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">L2VpnGrpName</name>

<value xsi:type="xsd:string">VPNSC</value>

</item>

<name xsi:type="xsd:string">ElineName</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>-->

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">ServiceInstID</name>

</item>-->

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Service Request with Range of Values for Outer VLAN/Inner VLAN

In the following example, an EVC service request with pseudowire is created. If ranges for Outer VLAN/Inner VLAN needs to be enabled, they should be set to editable at the policy level, and in the service request the attributes MatchOuterVlan and MatchInnerVlan should be set to TRUE/FALSE. These attributes are highlighted in bold below. This is applicable for both IOS and ASR9K devices.

Note These highlighted attributes are not mandatory attributes and would be required only when a range needs to be enabled.

The following XML example shows a partial list of the properties that can be specified for the attachment circuit EvcServiceInstanceAttrs.

Example: CreateEVC_PW_ServiceOrder_Ranges.xml

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">MatchOuterVlan</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">MatchInnerVlan</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

Creating a Pseudowire Service Request with Encapsulation Type DEFAULT/UNTAGGED

In this example, an EVC pseudowire service request is created. In case of direct links, the encapsulation type can be set to DEFAULT or UNTAGGED. These attributes are highlighted in bold below. This is applicable for both IOS and ASR9K devices.

The table below shows the supported encapsulation types along with their respective API tag names:

Encapsulation Type	Tag Name
DOT1Q	DOT1Q*
DEFAULT	DEFAULT
UNTAGGED	UNTAGGED

* DOT1Q is an existing encapsulation type.

The following XML example shows a partial list of the properties that can be specified for the attachment circuit EvcETHLinkAttrs for Encapsulation Type UNTAGGED.

Example: CreateEvc_ServiceOrder_PW_EncapDefaultUntag.xml

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">UNTAGGED</value>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

</properties>

</objectPath>

The following XML example shows a partial list of the properties that can be specified for the attachment circuit EvcETHLinkAttrs for Encapsulation Type DEFAULT.

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

<value xsi:type="xsd:string">DEFAULT</value>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

</properties>

</objectPath>

Creating a Pseudowire Service Request with ANY VLAN/Tagged with Untagged VLANs

In this example, an EVC pseudowire service request is created. To enable ANY VLAN or Tagged with Untagged VLANs for EVC direct connect, the attributes should be set to TRUE/FALSE. These attributes are highlighted in bold below. This is applicable for both IOS and ASR9K devices.

Note These highlighted attributes are not mandatory attributes and would be required only when ANY VLAN/Tagged with Untagged VLANs needs to be enabled.

The following XML example shows a partial list of the properties that can be specified for the attachment circuit EvcServiceInstanceAttrs.

Example: CreateEvc_ServiceOrder_PW_MatchTagUntag.xml

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">MatchAnyOuterVlan</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">MatchAnyInnerVlan</name>

</item>

<name xsi:type="xsd:string">MatchTaggedUntagged</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

</properties>

</objectPath>

Creating an EVC Pseudowire Service Request with Reserved Bandwidth

In the following example, an EVC pseudowire service request with reserved bandwidth is created. To set the reserved bandwidth, use the attribute ReservedBandwidth, which in the example is set to 542.

Example: CreateEvcPwSr_ResBw.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<name xsi:type="xsd:string">Description</name>

</item>

<name xsi:type="xsd:string">ServiceDefinition</name>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">UseBackupVCID</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">BackupVCID</name>

</item>

<name xsi:type="xsd:string">ReservedBandwidth</name>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/0/5</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

</item>

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">PWTunnelSel</name>

</item>

<name xsi:type="xsd:string">PWTunnelId</name>

</item> -->

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<name xsi:type="xsd:string">AutoPickServiceInstName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">EncapsulationType</name>

</item> -->

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet2/3</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

</item>

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">PWTunnelSel</name>

</item>

<name xsi:type="xsd:string">PWTunnelId</name>

</item> -->

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<name xsi:type="xsd:string">AutoPickServiceInstName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">EncapsulationType</name>

</item> -->

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcPseudowireNeighborLinks</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PathXml</name>

<value xsi:type="xsd:string"><![CDATA[

<value>Required NE/Link</value>

<value>Excluded NE/Link</value>

</valueMap>

</field>

</pwfield>

</field>

<field id="reqExElementpane01_group0widget1" name="reqExElement" position="pane01_group0widget1" required="true" resource="devicesAndTpTunnels" title="" type="textpicker" value="cl-test-l2-7600-5:Tunnel-tp6(64)<===>isc-asr903:Tunnel-tp682(64)"/>

<value>Working Path</value>

</valueMap>

</field>

</group>

</section>

</service>]]> </value>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Local Connect Service Request with ATM Ethernet

In the following example, a EVC service request with ATM Ethernet and local connect is created. The attributes relevant for the bridge domain feature are AtmTransportMode, AtmVcd, VirtualConnId, and VirtualPvtId (all in bold below).

Example: CreateATM_ETHERNET_LOCAL_WithBD.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-1</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<value xsi:type="xsd:string">ATM_Local</value>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcATMLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AtmInterfaceEncapType</name>

</item>

<name xsi:type="xsd:string">AtmTransportMode</name>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

</item>

<name xsi:type="xsd:string">AtmVcd</name>

</item>

<name xsi:type="xsd:string">VirtualConnId</name>

</item>

<name xsi:type="xsd:string">VirtualPvtId</name>

</item>

<name xsi:type="xsd:string">PwTunnelSelection</name>

</item>

<name xsi:type="xsd:string">InterfaceTunnel</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UsePwClass</name>

</item>

<name xsi:type="xsd:string">PwClassName</name>

<value xsi:type="xsd:string">pw-class</value>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/13</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/14</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Service Request with ATM Ethernet

In the following example, a EVC service request with ATM Ethernet and pseudowire is created. The attributes for specifying the pw-class are UseExistingPwClass and ExistingPwClassName higlighted in bold.

UseExistingPwClass and ExistingPwClassName are applicable only for ATM Ethernet interworking services. They are supported only for IOS devices and require you to provide the PW class name, which should already exist in the device.

The attributes relevant for the bridge domain feature are AtmTransportMode, AtmVcd, VirtualConnId, and VirtualPvtId (all in bold below).

Example: CreateATM_ETH_PW_WithBridgeDomain.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:48.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<value xsi:type="xsd:string">ATM_ETHERNET_PW_VC</value>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

<name xsi:type="xsd:string">AutopickVCID</name>

</item>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcATMLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AtmInterfaceEncapType</name>

</item>

<name xsi:type="xsd:string">AtmTransportMode</name>

</item>

<name xsi:type="xsd:string">UniShutdown</name>

</item>

<name xsi:type="xsd:string">AtmVcd</name>

</item>

<name xsi:type="xsd:string">VirtualConnId</name>

</item>

<name xsi:type="xsd:string">VirtualPvtId</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

<name xsi:type="xsd:string">UseExistingPwClass</name>

</item>

<name xsi:type="xsd:string">ExistingPwClassName</name>

<value xsi:type="xsd:string">pwclass1</value>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-2</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/16</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

<name xsi:type="xsd:string">UseExistingPwClass</name>

</item>

<name xsi:type="xsd:string">ExistingPwClassName</name>

<value xsi:type="xsd:string">pwclass2</value>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-2</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/15</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

<name xsi:type="xsd:string">UseExistingPwClass</name>

</item>

<name xsi:type="xsd:string">ExistingPwClassName</name>

<value xsi:type="xsd:string">pwclass2</value>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Service Request with Hybrid VPLS

In the following example, a EVC service request with Hybrid VPLS (H-VPLS) and pseudowire is created. In the example below, the EvcHvplsRole attribute i set to HUB. This service request can be used to provision (H-)VPLS with (static) single/multi-segment pseudowire over MPLS-TP, MPLS-TE and LDP.

Example: CreateEvcSR-MS-HVPLS.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="583F08B4B8B1E3B818E0CD20DFFFDFD2"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<!--<action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>-->

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<value xsi:type="xsd:string">d-evc-msvpls</value>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

<value xsi:type="xsd:string">d-vpn-msvpls</value>

</item>

<!--<item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">AutopickVCID</name>

</item>-->

<name xsi:type="xsd:string">AutopickVfiName</name>

</item>

</item>

<!--item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">VfiName</name>

</item-->

<name xsi:type="xsd:string">UseSVI</name>

</item>

<name xsi:type="xsd:string">DiscoveryMode</name>

<value xsi:type="xsd:string">Manual</value>

</item>

<!--item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">UseSplitHorizon</name>

</item-->

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">EvcHvplsRole</name>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/0/5</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">EvcHvplsRole</name>

<value xsi:type="xsd:string">SPOKE_WITH_SPOKES</value>

</item>

<name xsi:type="xsd:string">HubPe</name>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/4</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcPseudowireNeighborLinks</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PathXml</name>

<value xsi:type="xsd:string"><![CDATA[

<value>Required NE/Link</value>

<value>Excluded NE/Link</value>

</valueMap>

</field>

</pwfield>

</pwfield>

</pwfield>

</field>

<field id="reqExElementpane01_group0widget1" name="reqExElement" position="pane01_group0widget1" required="true" resource="devicesAndTpTunnels" title="" type="textpicker" value="isc-asr903:Tunnel-te6555(73)<===>cl-test-l2-7600-5:Tunnel-te1000(73)"/>

<value>Working Path</value>

</valueMap>

</field>

</group>

<value>Required NE/Link</value>

<value>Excluded NE/Link</value>

</valueMap>

</field>

<field id="reqExElementpane01_group0widget1" name="reqExElement" position="pane01_group0widget1" required="true" resource="devicesAndTpTunnels" title="" type="textpicker" value="cl-test-l2-7600-5:Tunnel-tp125(42) <===> isc-cl-test-l2-7600-6:Tunnel-tp9808(42)"/>

<value>Working Path</value>

</valueMap>

</field>

</group>

</section>

</service>]]> </value>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Head-End Service Request for Access into L3VPN

In the following example, a pseudowire head-end service request is created for pseudowire access into L3VPN. The significant attribute is ConfigurePseudowireHE, which in the example is set to true. This makes it possible to configure Pw-Ether type interfaces at the service request level in addition to existing Ethernet services

Example: CreateEvcSR-pwHE-managed.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="568C3F922C7078A0A6FE2F9182C6A4AD"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<!-- <action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">AnyName</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>-->

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">AnyName</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<value xsi:type="xsd:string">d-directEvc-pw</value>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/15</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">SystemMTU</name>

</item> -->

<name xsi:type="xsd:string">EncapsulationType</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UseSplitHorizon</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item> -->

<!-- <item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">AutoPickOuterVlan</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>-->

<name xsi:type="xsd:string">InnerVlanRange</name>

</item>

<!--<item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">TranslateOuterVlanId</name>

</item>

<name xsi:type="xsd:string">TranslateInnerVlanId</name>

</item> -->

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<!--<item xsi:type="ns1:CIMProperty">

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/1/0/5</value>

</item>-->

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">PW-Ether550</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ElineName</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<!--

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">UseSplitHorizon</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

<name xsi:type="xsd:string">PwClassName</name>

<value xsi:type="xsd:string">false</value>

</item>

-->

<name xsi:type="xsd:string">UsePwClass</name>

<value xsi:type="xsd:string">false</value>

</item>

</properties>

</objectPath>

<!--<objectPath xsi:type="ns1:CIMObjectPath">

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">EncapsulationType</name>

</item>

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

</properties>

</objectPath> -->

</objectPath>

<!-- <objectPath xsi:type="ns1:CIMObjectPath">

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet5/15</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">UseUpeServiceInst</name>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">TranslateOuterVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">TranslateInnerVlanId</name>

</item>

<name xsi:type="xsd:string">TranslateOuterVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ProtocolTunnelling</name>

</item>

<name xsi:type="xsd:string">VtpDropThreshold</name>

</item>

<name xsi:type="xsd:string">CdpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpThreshold</name>

</item>

<name xsi:type="xsd:string">VtpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpEnable</name>

</item>

<name xsi:type="xsd:string">VtpEnable</name>

</item>

<name xsi:type="xsd:string">StpEnable</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">SpeedType</name>

</item>

<name xsi:type="xsd:string">DuplexType</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">MacAddress</name>

</item>

<name xsi:type="xsd:string">Aging</name>

</item>

<name xsi:type="xsd:string">ViolationActionType</name>

<value xsi:type="xsd:string">RESTRICT</value>

</item>

<name xsi:type="xsd:string">BroadcastTraffic</name>

</item>

<name xsi:type="xsd:string">MulticastTraffic</name>

</item>

<name xsi:type="xsd:string">UnicastTraffic</name>

</item>

</properties>

</objectPath>

</objectPath> -->

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a VPLS Service Request with IOS XR

In the following example, a VPLS EVC service request is created. The attributes for specifying the vpls class are AutoPickBridgeGroupName, AutoPickBridgeDomainName, BridgeGroupName, and BridgeDomainName higlighted in bold.

Example: CreateEVCSR_IOSXR_VPLS.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="p36bttjwy1"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<value xsi:type="xsd:string">VplsPolicy</value>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

<name xsi:type="xsd:string">AutopickVCID</name>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/1/0/11</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickBridgeGroupName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickBridgeDomainName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">BridgeGroupName</name>

</item>

<name xsi:type="xsd:string">BridgeDomainName</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet0/0/0/11</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickBridgeGroupName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickBridgeDomainName</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">BridgeGroupName</name>

</item>

<name xsi:type="xsd:string">BridgeDomainName</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a VPLS Service Request for E-TREE

In the following example, an EVC VPLS service request is created to identify root and leaf nodes in an E-TREE. To do this, set the EtreeRole attribute to ROOT or LEAF. In the example, it is set to LEAF.

Example: CreateEvcVplsSr_Etree.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="A2CA3E07360764655638E548D94C888E"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceOrder</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceName</name>

<value xsi:type="xsd:string">ServiceOrder257</value>

</item>

<name xsi:type="xsd:string">DesiredDueDate</name>

</item>

<name xsi:type="xsd:string">NumberOfRequests</name>

</item>

</properties>

</objectPath>

</action>

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">EvcSR-7</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

</item>

<name xsi:type="xsd:string">VfiName</name>

<value xsi:type="xsd:string">egtgee</value>

</item>

<name xsi:type="xsd:string">UseSVI</name>

</item>

<name xsi:type="xsd:string">DiscoveryMode</name>

<value xsi:type="xsd:string">Manual</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-7609-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet7/0/15</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">VlanID</name>

</item>

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">EtreeRole</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">BothTags</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

</item>

</properties>

</objectPath>

<!--

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<value xsi:type="xsd:string">iscind-3750-1</value>

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">FastEthernet1/0/12</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIProtocolTunnelAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ProtocolTunnelling</name>

</item>

<name xsi:type="xsd:string">VtpDropThreshold</name>

</item>

<name xsi:type="xsd:string">CdpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpDropThreshold</name>

</item>

<name xsi:type="xsd:string">StpThreshold</name>

</item>

<name xsi:type="xsd:string">VtpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpThreshold</name>

</item>

<name xsi:type="xsd:string">CdpEnable</name>

</item>

<name xsi:type="xsd:string">VtpEnable</name>

</item>

<name xsi:type="xsd:string">StpEnable</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIInterfaceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">SpeedType</name>

</item>

<name xsi:type="xsd:string">DuplexType</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">ViolationActionType</name>

<value xsi:type="xsd:string">RESTRICT</value>

</item>

<name xsi:type="xsd:string">Aging</name>

</item>

<name xsi:type="xsd:string">MacAddress</name>

</item>

<name xsi:type="xsd:string">BroadcastTraffic</name>

</item>

<name xsi:type="xsd:string">MulticastTraffic</name>

</item>

<name xsi:type="xsd:string">UnicastTraffic</name>

</item>

<name xsi:type="xsd:string">StdUniPort</name>

</item>

<name xsi:type="xsd:string">DisableCDP</name>

</item>

<name xsi:type="xsd:string">PeIntfDesc</name>

<value xsi:type="xsd:string">Description</value>

</item>

<name xsi:type="xsd:string">PortSecurity</name>

</item>

<name xsi:type="xsd:string">Shutdown</name>

</item>

<name xsi:type="xsd:string">UniKeepAlive</name>

</item>

</properties>

</objectPath>

-->

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Creating a Pseudowire Service Request for an L2-Access Link With EVC-syntax

In the following example, an EVC pseudowire service request is created. In case of L2 access links, UseUpeServiceInst is enabled (which is similar to the EVC UNI checkbox in the GUI). After setting the value for the attribute UseUpeServiceInst to TRUE, use the object EvcUNIServiceInstanceAttrs to set the then corresponding values for the EVC UNI related attributes as highlighted below. This is applicable for L2 access links only.

Example: CreateEVC_ServiceOrder_PW_EVCUNI.xml

<?xml version="1.0" encoding="UTF-8"?>

<soapenv:Envelope

xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0"

xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2002-12-13T14:55:38.885Z"

Wait="true" WaitTimeout="90" sessiontoken="F7C9020B82541A77DBFBF9A0FC6524E3"/>

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actions xsi:type="ns1:CIMActionList"

soapenc:arrayType="ns1:CIMAction[]">

<actionName xsi:type="xsd:string">createInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">RequestName</name>

<value xsi:type="xsd:string">AnyName</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">ServiceDefinition</name>

<name xsi:type="xsd:string">ServiceDefinitionType</name>

</qualifier>

</item>

</item>

</item>

<name xsi:type="xsd:string">UseSVI</name>

<value xsi:type="xsd:string">false</value>

</item>

</properties>

<className xsi:type="xsd:string">EvcLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</item>

<name xsi:type="xsd:string">UniInftId</name>

<value xsi:type="xsd:string">GigabitEthernet5/15</value>

</item>

</item>

</properties>

<className xsi:type="xsd:string">EvcETHLinkAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">UseServiceInst</name>

</item>

<name xsi:type="xsd:string">UseUpeServiceInst</name>

</item>

<name xsi:type="xsd:string">SystemMTU</name>

</item>

<name xsi:type="xsd:string">AutoPickVlanId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">XconnectOnSVI</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcUNIServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">TranslateOuterVlanId</name>

</item>

</properties>

</objectPath>

<className xsi:type="xsd:string">EvcServiceInstanceAttrs</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">OuterVlanRange</name>

</item>

<name xsi:type="xsd:string">AutoPickServiceInstId</name>

<value xsi:type="xsd:string">false</value>

</item>

<name xsi:type="xsd:string">ServiceInstID</name>

</item>

<name xsi:type="xsd:string">RewriteActionType</name>

</item>

<name xsi:type="xsd:string">TranslateInnerVlanId</name>

</item>

<name xsi:type="xsd:string">TranslateOuterVlanId</name>

</item>

</properties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Modifying an EVC Multi-Segment Pseudowire Service Request

The following example shows how an EVC Multi Segment service request is modified. EvcPseudowireNeighborLinks is the XML tag used for the service request level attribute, which is highlighted below. It contains only one item PathXml, which has all the information about the source device, destination device, and stitching point.

Example: ModifyEVC_MSPW.xml

<?xml version="1.0" encoding="utf-8"?>

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

xmlns:ns0="http://www.cisco.com/cim-cx/2.0" xmlns:ns1="urn:CIM">

<soapenv:Header>

<ns0:message id="87855" timestamp="2008-04-15T14:55:38.885Z"

Wait="true" WaitTimeout="90"

sessiontoken="87FF9779CE847E2E18C5630091C3A8EB" />

</soapenv:Header>

<soapenv:Body>

<ns1:performBatchOperation>

<actionName xsi:type="xsd:string">modifyInstance</actionName>

<className xsi:type="xsd:string">ServiceRequest</className>

<name xsi:type="xsd:string">RequestName</name>

</item>

</item>

</properties>

<className xsi:type="xsd:string">ServiceRequestDetails</className>

<name xsi:type="xsd:string">LocatorId</name>

</item>

<className xsi:type="xsd:string">EvcLink</className>

<name xsi:type="xsd:string">LocatorId</name>

</item>

</keyProperties>

</objectPath>

<className xsi:type="xsd:string">EvcLink</className>

<name xsi:type="xsd:string">LocatorId</name>

</item>

</keyProperties>

</objectPath>

<className xsi:type="xsd:string">EvcPseudowireNeighborLinks</className>

<name xsi:type="xsd:string">LocatorId</name>

</item>

</keyProperties>

<name xsi:type="xsd:string">PathXml</name>

<![CDATA[

<value>Required NE/Link</value>

<value>Excluded NE/Link</value>

</valueMap>

</field>

</pwfield>

</pwfield>

</field>

<value>Working Path</value>

</valueMap>

</field>

</group>

</section>

</service>]]>

</value>

</item>

</properties>

</objectPath>

</keyProperties>

</objectPath>

</action>

</actions>

</ns1:performBatchOperation>

</soapenv:Body>

</soapenv:Envelope>

Service Request Examples in the API Programmer Reference

The following API XMLs are included in the Cisco Prime Provisioning API 7.2 Programmer Reference:

Create1ATM_1ETH_PW_WithoutBD.xml
CreateATM_ATM_Local_VP_SR.xml
CreateATM_ETH_PW_WithBridgeDomain.xml
CreateATM_ETHERNET_LOCAL_WithBD.xml
CreateATM_ETHERNET_LOCAL_WithoutBD.xml
CreateEVC_PW_ServiceOrder_Ranges.xml
CreateEvc_ServiceOrder_PW_EncapDefaultUntag.xml
CreateEvc_ServiceOrder_PW_MatchTagUntag.xml
CreateEVCPseudowireOrder_withTemplates.xml
CreateEVCServiceOrder_LOCAL.xml
CreateEVCServiceOrder_PW.xml
CreateEVCServiceOrder_VPLS.xml
CreateEVCSR_IOSXR_Local_With_BridgeDomain.xml
CreateEVCSR_IOSXR_Local_With_p2p_Elinename.xml
CreateEVCSR_IOSXR_PW_With_BridgeDomain.xml
CreateEVCSR_IOSXR_PW_With_p2p_Elinename.xml
CreateEVCSR_IOSXR_VPLS.xml
ModifyEVCServiceOrder.xml
ViewEVCServiceRequest.xml
CreateEvcSR-MS-HVPLS.xml
CreateEvcSR-pwHE-managed.xml
CreateEvcSR-SetMTU.xml

End-to-End Provisioning Process

This section describes the process for using the API to provision EVC, and includes the required operation, object definition (className), and parameter definitions.

Process Summary

This EVC provisioning example uses the following processes:

1. Create device groups (optional).

2. Create devices.

3. Collect device configurations.

4. Create provider.

5. Create regions.

6. Declare devices as PEs.

7. Create access domains and assign PEs to them.

8. Create customer.

9. Create sites.

10. Create named physical circuits.

11. Create VLAN ID pool.

12. Create VC ID pool.

13. Create VPN.

14. Create EVC service definition (policy).

15. Create EVC service request.

Prerequisites

For security reasons, Prime Provisioning requires the virtual terminal protocol (VTP) to be configured in transparent mode on all switches before provisioning EVC service requests.

To set the VTP mode, enter the following Cisco IOS commands:

configure terminal

vtp mode transparent

Enter the following Cisco IOS command to verify that the VTP has changed to transparent mode:

Show vtp status

Detailed Process

To provision EVC using Prime Provisioning API, an EVC service policy and an EVC service request are required and only one subtype will be defined and of type Evc.

The EVC service policy/service definition specifies the attributes related to the EVC links and non-EVC links. The service request defines the device interfaces for each EVC/non-EVC link connection and can optionally override policy attributes in each of the corresponding links.

This section describes the process for provisioning EVC using XML examples.

The complete list of XML examples for EVC is available here:
Cisco Prime Provisioning API 7.2 Programmer Reference

Note For clarity, this provisioning process shows each step as a separate XML request. Many of these steps can be combined using performBatchOperations.

Step 1 Create device groups (optional).

Table 9-1 Create Device Group
Operation	className	Required Parameters
createInstance	DeviceGroup	Name

XML Examples:

CreateDeviceGroup.xml

Tip If you plan to create device groups, create the empty device groups before you create the devices. As you create each device, add the associated device group name as a key property in the create device XML request.

In the following example, the device group (CustDev) is added as a key property when creating the device CiscoRouter:

<ns1:createInstance>

<className xsi:type="xsd:string">CiscoRouter</className>

<name xsi:type="xsd:string">DeviceGroup</name>

<value xsi:type="xsd:string">CustDev</value>

</item>

<name xsi:type="xsd:string">CfgUpDnldMech</name>

<value xsi:type="xsd:string">DEFAULT</value>

</item>

<name xsi:type="xsd:string">TransportMechanism</name>

<value xsi:type="xsd:string">DEFAULT</value>

</item>

<name xsi:type="xsd:string">Password</name>

<value xsi:type="xsd:string">vpnsc</value>

</item>

Step 2 Create devices.

Every network element that Prime Provisioning manages must be defined as a device in the system. An element is any device from which Prime Provisioning can collect configuration information.

Table 9-2 Create Devices
Operation	className	Required Parameters
createInstance	CiscoRouter CatOS	One or more of the following: ManagementIPAddress HostName DomainName

XML Examples:

CreateCiscoRouter.xml
CreateCat.xml

Step 3 Collect device configurations.

A device configuration collection is a task. This task uploads the current configuration from the device to the Prime Provisioning database. The collection task is executed through a service request, and the service request is scheduled through a service order.

Note The service request name must be unique for each NBI API.

Table 9-3 Collect Device Configurations
Operation	className	Required Parameters
createInstance	ServiceOrder	ServiceName NumberofRequests ServiceRequest
	ServiceRequest	RequestName Type=Task ServiceRequestDetails
	ServiceRequestDetails	SubType=COLLECTION Device (or DeviceGroup) Note You must select at least one device or device group. RetreiveVersion=true RetreiveDeviceInterfaces=true

XML Examples:

CreateTaskServiceOrderCollection.xml

Step 4 Create a provider.

The provider is the administrative domain of an ISP, with one BGP autonomous system (AS) number. The network owned by the provider is called the backbone network. If an ISP has two AS numbers, you must define it as two provider administrative domains.

Table 9-4 Create a Provider
Operation	className	Required Parameters
createInstance	Provider	Name AsNumber

XML Examples:

CreateProvider.xml

Step 5 Create regions.

Each provider can contain multiple regions.

Table 9-5 Create Regions
Operation	className	Required Parameters
createInstance	Region	Name Provider

XML Examples:

CreateRegion.xml

Step 6 Declare devices as PEs.

The XML request that assigns a PE role to a device is also used to:

Assign PE devices to Regions/Provider
Specify interface information

Table 9-6 Create PE Devices
Operation	className	Required Parameters
createInstance	PE	Provider Region Role= – PE_CLE – PE_POP Device Interface

XML Examples:

CreatePE.xml

Step 7 Create access domains.

Prime Provisioning assigns a VLAN ID to the attachment circuit from the VLAN ID pool. Select all PE-POP devices to be associated with this domain, and later in the process, when VLAN ID pools are created, the PE-POP is automatically assigned a VLAN ID.

Note If provisioning for an Ethernet provider core, all PE devices must be in the same access domain and a single VLAN ID is used for the entire VPLS VPN. If provisioning for an MPLS provider core, the PE devices can be in different access domains.

Table 9-7 Create Access Domains
Operation	className	Required Parameters
createInstance	AccessDomain	Name Provider PE (Role must be PE_POP)

XML Examples:

CreateAccessDomain.xml

Step 8 Create a customer.

A customer is a requestor of VPN services. Each customer can contain multiple customer sites. Each site belongs to only one customer and can contain multiple CPEs.

Table 9-8 Create Organization
Operation	className	Required Parameters
createInstance	Organization	Name

XML Examples:

CreateOrganization.xml

Step 9 Create sites and assign customers (Organizations) to them.

Table 9-9 Create Sites
Operation	className	Required Parameters
createInstance	Site	Name Organization

XML Examples:

CreateSite.xml

Step 10 Create Named Physical Circuits (NPCs). This step is not required if you plan to manually configure the physical links in the VPLS service request (Step 16).

Create an NPC for each attachment circuit (CE/UNI to PE-POP link). If there are intermediate devices, those links must also be added to the NPC using PhysicalLink.

Note When creating an NPC, you must specify the CPE as the source device and the PE-POP as the destination device. If there are intermediate devices, such as PE-CLEs, the source and destination devices must follow the direction of the CPE to PE-POP link.

Table 9-10 Create Named Physical Circuits
Operation	className	Required Parameters
createInstance	NamedPhysicalCircut	PhysicalLink
	PhysicalLink	SrcDevice DestDevice SrcIfName DestIfName

You can create one XML request for the NamedPhysicalCircuit and include multiple PhysicalLinks as shown in the following example:

<ns1:createInstance>

<className xsi:type="xsd:string">NamedPhysicalCircuit</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

</properties>

<className xsi:type="xsd:string">PhysicalLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SrcDevice</name>

<value xsi:type="xsd:string">Device1</value> </item>

<name xsi:type="xsd:string">DestDevice</name>

<value xsi:type="xsd:string">Device2</value> </item>

<name xsi:type="xsd:string">SrcIfName</name>

<name xsi:type="xsd:string">DestIfName</name>

</properties>

<className xsi:type="xsd:string">PhysicalLink</className>

<properties xsi:type="ns1:CIMPropertyList"

soapenc:arrayType="ns1:CIMProperty[]">

<name xsi:type="xsd:string">SrcDevice</name>

<value xsi:type="xsd:string">Device3</value> </item>

<name xsi:type="xsd:string">DestDevice</name>

<value xsi:type="xsd:string">Device5</value> </item>

<name xsi:type="xsd:string">SrcIfName</name>

<name xsi:type="xsd:string">DestIfName</name>

</properties>

</objectPath>

</ns1:createInstance>

XML Examples:

CreateNamedPhysicalCircuit.xml
CreateNamedPhysicalCircuitRing.xml—Use this example if there is a Ring topology configuration on the PE-CLEs.
CreateNamedPhysicalCircuitRingExisting.xml—Use this example to reference an NPC ring that has already been created.

Step 11 Create VLAN ID pool.

Create a VLAN ID pool, specify a range, and associate it to an access domain to manually enter the parameters for a VLAN ID pool. To have Prime Provisioning automatically assign VLANs to the attachment circuits, specify the Autopick_Vlan_ID keyword in the service definition (Step 15).

When provisioning for an Ethernet core, VPLS service requests use the VLAN ID to reference the attachment circuits.

Table 9-11 Create VLAN ID Pools
Operation	className	Required Parameters
createInstance	VlanIdPool	Start Size AssocClassType AssocClassId

XML Examples:

CreateVlanIdPool.xml

Step 12 Create VC ID pool.

For a VPLS VPN, all PE-POP routers use the same VC ID to establish the virtual circuit (VC) across the provider core. The VC ID is also the VPN ID and is assigned from the VC ID pool. Prime Provisioning ensures that VC IDs are unique among VPLS VPNs.

Note A VC ID pool is global (not associated with a provider or organization).

Table 9-12 Create VC ID Pool
Operation	className	Required Parameters
createInstance	VcIdPool	Start Size

XML Examples:

CreateVcIdPool.xml

Step 13 Create a VPN.

When you create a VPN to use in VPLS provisioning, you must enable it to support VPLS (VplsVpn=true), and define the type of service (ERS or EWS).

Prime Provisioning assigns a VPN ID (from the VC ID pool) to each VPLS VPN.

Table 9-13 Create VPNs
Operation	className	Required Parameters
createInstance	VPN	Name Organization or Provider VplsVpn=true ServiceType= – ERS – EWS

XML Examples:

CreateVPN.xml

Step 14 Create EVC service definition (policy).

A EVC service definition specifies the core type, service subtype, device properties, and the attributes common to all attachment circuits.

Table 9-14 Create a EVC Service Definition
Operation	className	Required Parameters
createInstance	ServiceDefinition	Name Type=Evc Provider or Organization Note If you do not specify a Provider or Organization, the service policy is global ServiceDefinitionDetails
	ServiceDefinitionDetails	SubType=Evc Core_Type= – PseudoWire – VPLS – LOCAL N_PE_Encap and U_PE_Encap= – DOT1Q – DOT1QTUNNEL – ACCESS EvcUNIMacACLAddresses – MacAddress (You can list multiple secure MAC addresses) AutoPickBDVlanId
	PW	UsePwClass= – TRUE – FALSE PwClassId= – 1 – any other number

Note If AutoPickBDVlanId=true, be sure that an access domain is attached to the PE-POP, and a VLAN ID pool is assigned to the access domain (Step 7).

XML Examples:

CreateEVCServiceDefn_LOCAL.xml
CreateEVCServiceDefn_PW.xml
CreateEVCServiceDefn_VPLS.xml
Create_PW_EVCPolicy.xml
CreateLocalEVCPolicy.xml
CreateVplsEVCPolicy.xml

Step 15 Create EVC service request.

A EVC service request defines the service definition and VPN, assigns interfaces and attributes for each attachment circuit (EvcLink), and applies any template information.

Table 9-15 Create a EVC Service Request
Operation	className	Required Parameters
createInstance	ServiceOrder	ServiceName NumberOfRequests Provider or Organization Note If you do not specify a Provider or Organization, the service policy is global. ServiceRequest
	ServiceRequest	RequestName Type=Evc ServiceRequestDetails
	ServiceRequestDetails	ServiceDefinition – ServiceDefinitionType=Evc VPN EvcLink
	EvcLink	NPC EvcUNIMacACLAddresses SRAssociatedTemplate (optional) Note See the “Templates in a Service Request” section.

Tip Record the LocatorId value from the XML response for the service request. The Locator ID is required for subsequent service request tasks.

XML Example:

CreateEVCServiceOrder_LOCAL.xml
CreateEVCServiceOrder_VPLS.xml
CreateEVCServiceOrder_PW.xml

Auditing Service Requests

A configuration audit occurs automatically each time you deploy a service request. During this configuration audit, Prime Provisioning verifies that all Cisco IOS commands are present and that they have the correct syntax. An audit also verifies that there were no errors during deployment by examining the commands configured by the service request on the target devices. If the device configuration does not match what is defined in the service request, the audit flags a warning and sets the service request to a Failed Audit or Lost state.

If you do not want the configuration audit to occur, change the value for the Audit parameter. The Audit parameter supports these values:

Audit—This is the default. A successfully deployed service request is automatically audited unless this flag is changed.
NoAudit—Do not perform a configuration audit when the service request is deployed.
ForceAudit—Perform a configuration audit even if the service request deployment is not successful.

You can use the Audit parameter with a Create, Modify, or Decommission service request or a Deployment task. See the “Service Decommission” section for more information. To perform a configuration audit as a separate task, see the “Configuration Audit” section.

Bias-Free Language

Results

Chapter: EVC Provisioning

EVC Provisioning

EVC Service Definitions

Supported Service Definitions and Service Orders

Policy Types

MPLS Core Connectivity Types

Policy Examples

Creating a Local Connect Policy

Creating a Pseudowire Policy

Creating a VPLS Policy

Creating a Local Connect Policy with ATM/Ethernet internetworking

Creating a Pseudowire Policy with ATM/Ethernet Internetworking

Creating a Pseudowire Policy Setting the MTU Size

Creating a Pseudowire Head-End Policy for Access into L3VPN

Creating a Pseudowire Policy With Reserved Bandwidth

Configuring an SVI/EVC Hybrid Scenario

Creating a Policy for Specifying Service Instance Name

Creating a Multi-Segment Pseudowire Policy

Creating an EVC VPLS Policy for E-TREE

Policy Examples in the API Programmer Reference

EVC Service Requests

Overview

End-To-End Wires

Pseudowire Network Diagram

VPLS Network Diagram

Local Connect Network Diagram

Service Request Examples

Creating a Local Connect Service Request

Creating a Pseudowire Service Request

Creating a VPLS Service Request

Modifying a EVC Service Request

Creating Access Ring with two NPEs

Creating NPC

Configuring an SVI/EVC Hybrid Scenario Service Request

Specifying Service Instance Name for EVC Service Requests

Creating a Local Connect Service Request for IOS-XR using Bridge Domain

Creating a Pseudowire Service Request Setting the MTU Size

Creating a Pseudowire Service Request with P2P E-line Name

Creating a Pseudowire Service Request with Range of Values for Outer VLAN/Inner VLAN

Creating a Pseudowire Service Request with Encapsulation Type DEFAULT/UNTAGGED

Creating a Pseudowire Service Request with ANY VLAN/Tagged with Untagged VLANs

Creating an EVC Pseudowire Service Request with Reserved Bandwidth

Creating a Local Connect Service Request with ATM Ethernet

Creating a Pseudowire Service Request with ATM Ethernet

Creating a Pseudowire Service Request with Hybrid VPLS

Creating a Pseudowire Head-End Service Request for Access into L3VPN

Creating a VPLS Service Request with IOS XR

Creating a VPLS Service Request for E-TREE

Creating a Pseudowire Service Request for an L2-Access Link With EVC-syntax

Modifying an EVC Multi-Segment Pseudowire Service Request

Service Request Examples in the API Programmer Reference

End-to-End Provisioning Process

Process Summary

Prerequisites

Detailed Process

Auditing Service Requests

Was this Document Helpful?

Contact Cisco