The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Tenant Management page displays a list of all tenants you have created. You can add, modify or delete a tenant. You can also attach templates to tenants.
This chapter has the following sections:
|
Go to Tenants> Tenant Management. The Tenant Management page lists all the available tenants. By default, the tenants under VTS are displayed. You can choose individual VMMs from the drop-down to display the tenants under these.
|
To add tenants:
| Step 1 |
Go to . The Tenant Management page appears. |
| Step 2 |
Click Add (+) icon. |
| Step 3 |
Enter the following:
|
| Step 4 |
Click Save. |
| Step 5 |
To add a Zone, click the Add (+) icon. The Add Zone popup appears. |
| Step 6 |
Enter the zone name, and click OK. |
| Step 7 |
Click Save. |
To edit a tenant:
| Step 1 |
Go to . The Tenant Management page appears. |
| Step 2 |
Select the tenant, then click the Edit icon. |
| Step 3 |
Modify the following:
|
| Step 4 |
Click Save. |
| Step 5 |
To enable or disable network extension, use the Extend all networks toggle switch. By default, Extend all networks is Yes. |
| Step 6 |
Modify the zone details. |
| Step 7 |
Click Save. |
Feedback