Card Types
This appendix provides a list of interface and card types supported in Cisco TransportPlanner, as well as the corresponding Cisco product ID (Tables B-1 to B-29).
![](/c/dam/en/us/td/i/templates/note.gif)
Note The card names in this appendix designated with "_C" or "_L" appear in Cisco TransportPlanner with a "_y" designation before network analysis. The "_y" designation indicates that Cisco TransportPlanner will use either a C- or L-band card, depending on the band selected during project creation.
|
|
|
|
---|---|---|---|
Transponder |
TXP_MR_10E_C and TXP_MR_10E_L with EFEC1 |
Client 1+1 Y-Cable |
15454-10E-L1-C= (C band) 15454-10E-L1-L= (L band) |
Transponder |
TXP_MR_10E_C and TXP_MR_10E_L with FEC2 |
Client 1+1 Y-Cable |
15454-10E-L1-C= (C band) 15454-10E-L1-L= (L band) |
Transponder |
TXP_MR_10E_C and TXP_MR_10E_L without FEC |
Client 1+1 Y-Cable |
15454-10E-L1-C= (C band) 15454-10E-L1-L= (L band) |
Transponder |
TXP_MR_10E with EFEC |
Client 1+1 Y-Cable |
15454-10E-L1-xx.y= (C band) 15454-10E-L1-xx.y= (L band) |
Transponder |
TXP_MR_10E with FEC |
Client 1+1 Y-Cable |
15454-10E-L1-xx.y= (C band) 15454-10E-L1-xx.y= (L band) |
Transponder |
TXP_MR_10E without FEC |
Client 1+1 Y-Cable |
15454-10E-L1-xx.y= (C band) 15454-10E-L1-xx.y= (L band) |
Transponder |
TXP_MR_10G with FEC |
Client 1+1 Y-Cable |
15454-10T-L1-xx.y= |
Transponder |
TXP_MR_10G without FEC |
Client 1+1 Y-Cable |
15454-10T-L1-xx.y= |
Line Card |
OC-192 LR STM-64 LR |
Client 1+1 |
15454-192L-1-xx.y= (ANSI) 15454E-64L-xx.y= (ETSI) |
1 Enhanced forward error correction. 2 Forward error correction. |
|
|
|
|
Transponder |
TXP_MR_2.5G 2R |
Client 1+1 |
15454-MR-L1-xx.y= (Unprot) 15454-MRP-L1-xx.y= (Prot) |
|
|
|
|
Transponder |
TXP_MR_2.5G 2R |
Client 1+1 |
15454-MR-L1-xx.y= (Unprot) 15454-MRP-L1-xx.y= (Prot) |
|
|
|
|
Transponder |
TXP_MR_2.5G 2R |
Client 1+1 |
15454-MR-L1-xx.y= (Unprot) 15454-MRP-L1-xx.y= (Prot) |