Configuring SNMP

The following MIBs are supported in NCS 1002.

  • CISCO-CONFIG-MAN-MIB

  • CISCO-FLASH-MIB

  • CISCO-ENTITY-REDUNDANCY-MIB

  • CISCO-SYSTEM-MIB

  • CISCO-ENTITY-ASSET-MIB

  • EVENT-MIB

  • DISMAN-EXPRESSION-MIB

  • CISCO-FTP-CLIENT-MIB

  • NOTIFICATION-LOG-MIB

  • CISCO-RF-MIB

  • RADIUS-AUTH-CLIENT-MIB

  • RADIUS-ACC-CLIENT-MIB

  • IEEE8023-LAG-MIB

  • CISCO-TCP-MIB

  • UDP-MIB

  • CISCO-BULK-FILE-MIB

  • CISCO-CONTEXT-MAPPING-MIB

  • CISCO-OTN-IF-MIB

  • CISCO-ENHANCED-MEMPOOL-MIB

  • CISCO-PROCESS-MIB

  • CISCO-SYSLOG-MIB

  • ENTITY-MIB

  • CISCO-ENTITY-FRU-CONTROL-MIB

  • CISCO-IF-EXTENSION-MIB

  • RMON-MIB

  • CISCO-OPTICAL-MIB

  • CISCO-ENTITY-SENSOR-MIB

  • LLDP-MIB

  • CISCO-ALARM-MIB.my

  • IEEE8021-SECY-MIB (only SNMP read-only operations are supported for this MIB). For more information, see http://www.ieee802.org/1/files/public/MIBs/IEEE8021-SECY-MIB-200601100000Z.mib.

The following table provides more information about SNMP MIBs and the documentation links.

Task

Link

Determine the MIB definitions

SNMP Object Navigator

Configure SNMP

Configure SNMP

Understand the SNMP best practices regarding the recommended order of SNMP query, maximum cache hit, and SNMP retry and timeout recommendation

SNMP Best Practices

snmp-server community must be configured as SystemOwner for admin-plane parameters to appear to entity mib. The parameters of fans and power supply units are examples of admin-plane parameters.