Manage Users

This chapter describes the different types of users in Cisco NCS 2000 SVO. This chapter also describes the tasks to manage users.

Table 1. Feature History

Feature Name

Release Information

Feature Description

View Users

Cisco NCS 2000 Release 12.2

This feature allows an admin or superuser to view the details of users who have successfully logged into SVO.

User Groups

User groups are system-defined. The users in each group have certain levels of privileges and permissions and can perform a defined set of tasks.

The system-defined user groups are:

  • Superuser—A user assigned to this group has special permissions to perform any action on the system. The superuser has access to the SVO Admin Plane and the SSH interface. Superusers can create, modify, and delete users. Only one superuser can be created.

  • Admin—A user assigned to this group has read and write permissions. An admin can create, modify, and delete users.

  • Editor—A user assigned to this group has limited read and write permissions. An editor does not have permissions to create and manage users.

  • Viewer—A user assigned to this group has only read permission. A viewer cannot perform any action on the device.

External Authentication Users for SVO

In SVO, the following users are created to manage SVO provisioning activities:

  • Local users (local authentication)—Specifies users created to manage SVO instances.

  • External users (external authentication)—Specifies users created on the external authentication servers.

The local and external users are mutually exclusive, for example, if there is a local user as user1 configured on SVO, then another external user with same name user1 is not allowed to login.

The RADIUS or TACACS user who is created on the RADIUS or TACACAS server should have the Cisco-AVPair reply attribute that is configured for each user on SVO to authenticate.

The following table lists the server attribute mapped to user privileges supported on SVO.

Table 2.

Cisco-AVPair Reply Attribute

Value mapped in RADIUS Server

Value mapped in TACACAS Server

shell:priv-lvl=

3

3

shell:priv-lvl=

0

0

shell:priv-lvl=

1

1

Create Users

Use this task to create users. Only an admin or superuser creates new users. Superusers cannot be created using this task.

Before you begin

Log into the SVO Web Interface

Procedure

Step 1

Click the hamburger icon at the top-left of the page, and select Users Configuration.

Step 2

In the Users Configuration tab, click Create.

The Create User dialog box appears.
Step 3

Enter the following details.

  1. User Name—Type the user name. The user name must be a minimum of six and a maximum of 40 characters. It includes alphanumeric (a-z, A-Z, 0-9) characters and the allowed special characters are @, " - " (hyphen), and " . " (dot).

  2. Password—Enter the password which will be used by the user while logging into the system. The password must be a combination of alphanumeric (a-z, A-Z, 0-9) and special (+, #,%) characters. The minimum number of characters in the password is eight and the maximum number is 127. The password must not contain the user name.

  3. Retype Password—Retype the password.

  4. Full Name—Enter the full name of the user.

  5. Expiry Time (days)—Enter the time period in days before which the user needs to change the password. For example, if the user has set the expiry time to be 20 days, the user must change the password before 20 days are over.

    The user is automatically moved to the Change Password group after the time period in the Expiry Time field elapses. The user must change the password before performing any other action.

  6. Warning Before Expiry (days)—Enter the number of days the user is warned of the expiry of the password.

  7. Max Retry Number—Enter the number of maximum retries for the user. The user is logged out of the system if the password is incorrectly entered after this number of attempts is reached.

  8. Group—Select the group from the drop-down list. The available options are admin, editor, and viewer.

Step 4

Click Create.

The new user is added to the list.

Change Password

Use this task to change password for the user. Only an admin or superuser can change the password.

Before you begin

Log into the SVO Web Interface

Procedure

Step 1

Click the hamburger icon at the top-left of the page, and select Users Configuration.

Step 2

In the Users Configuration tab, check the check box corresponding to the user you want to change the password, and click Reset Password.

The reset Username password dialog box appears.

Step 3

Enter the new password in the New Password field.

The password must be a combination of alphanumeric (a-z, A-Z, 0-9) and special (+, #,%) characters. The minimum number of characters in the password is eight and the maximum is 127. The password must not contain the user name.

Step 4

Retype the same password in the Retype Password field.

Step 5

Click Reset Password.

A confirmation message appears.
Step 6

Click OK.

Delete Users

Use this task to delete users. Only an admin or superuser can delete users.


Note

Superusers cannot be deleted.

Before you begin

Log into the SVO Web Interface

Procedure

Step 1

Click the hamburger icon at the top-left of the page, and select Users Configuration.

Step 2

In the Users Configuration tab, check the check box corresponding to the user you want to delete and click Delete User.

A confirmation message appears.
Step 3

Click Yes.

Modify User Settings

Use this task to change the user settings.

Before you begin

Log into the SVO Web Interface

Procedure

Step 1

Click the User icon at the top-right of the page, and select Users Configuration.

The User Login Details and User Configurations tabs appear.

Step 2

View the displayed details in the User Login Details tab.

  • Last Login Date—The date on which the user had last logged in.

  • Last Logout Date—The date on which the user had last logged out.

  • Last Login Interface—The interface used for last login.

  • Number of Failed Login Attempts—The number of times the user has had failed login attempts before the current login.

  • Last Failed Login Message—The reason for the last login failure.

  • Warning Message—The message displays the number of days remaining for the expiry of the current password.

Step 3

To change the user attributes, go to the User Configurations tab. The following attributes can be changed by a superuser or an admin user except the user name.

  • User Name—Displays the user name.

  • Group—The original group a user was created in. An admin or a superuser can change the group to which a user belongs. Also, when a user has reached the set Expire Time, the user is moved automatically to the Change Password user group. The user must change the password before performing any other action on the system.

  • Full Name—Displays the full name of the user.

  • Max Retry Number—The number of times the user can attempt to login. The default value is 3.

  • Expire Time (days)—The number of days the current password is valid. The default value is 180.

  • Warning Before Expire (days)—The user is warned about the number of days remaining before the expiry of the current password. The value entered for this field must be lesser than the value entered for the Expire Time field. The default value is 14.

Step 4

Click Apply.

A confirmation message appears.
Step 5

Click Yes.