Examples
The following
sample output is from the
show l2vpn forwarding
bridge detail location command for IOS-XR releases 5.3.1 and
earlier:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge detail location 0/2/cpu0
Bridge-domain name: bg1:bd1, id: 0, state: up
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
Security: disabled
DHCPv4 snooping: profile not known on this node
IGMP snooping: disabled, flooding: disabled
Bridge MTU: 1500 bytes
Number of bridge ports: 1
Number of MAC addresses: 0
Multi-spanning tree instance: 0
GigabitEthernet0/1/0/1.2, state: oper up
Number of MAC: 0
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
Bridge-domain name: bg1:bd2, id: 1, state: up
Type: pbb-edge, I-SID: 1234
Core-bridge: pbb-bd2
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
Security: disabled
DHCPv4 snooping: profile not known on this node
IGMP snooping: disabled, flooding: disabled
Bridge MTU: 1500 bytes
Number of bridge ports: 0
Number of MAC addresses: 0
Multi-spanning tree instance: 0
PBB Edge, state: up
Number of MAC: 0
GigabitEthernet0/1/0/1.3, state: oper up
Number of MAC: 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
Bridge-domain name: bg1:bd3, id: 2, state: up
Type: pbb-core
Number of associated pbb-edge BDs: 1
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
Security: disabled
DHCPv4 snooping: profile not known on this node
IGMP snooping: disabled, flooding: disabled
Bridge MTU: 1500 bytes
Number of bridge ports: 0
Number of MAC addresses: 0
Multi-spanning tree instance: 0
PBB Core, state: up
Vlan-id: 1
GigabitEthernet0/1/0/1.4, state: oper up
Number of MAC: 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
The following
sample output is from the
show l2vpn forwarding
bridge detail location command for IOS-XR 5.3.2 release:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge detail location 0/0/CPU0
Bridge-domain name: pbb:pbb_core1, id: 10, state: up
Type: pbb-core
Number of associated pbb-edge BDs: 1
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled
DHCPv4 snooping: profile not known on this node
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping: disabled, flooding: enabled
MLD snooping: disabled, flooding: disabled
MMRP Flood Optimization: disabled
Storm control: disabled
P2MP PW: disabled
Bridge MTU: 1500 bytes
Number of bridge ports: 1
Number of MAC addresses: 5
Multi-spanning tree instance: 0
PBB-EVPN: enabled
Statistics:
packets: received 0, sent 963770
bytes: received 0, sent 263433178
PBB Core, state: Up
Vlan-id: 1
XC ID: 0x80000010
Number of MAC: 0
Statistics:
packets: received 0 (unicast 0), sent 0
bytes: received 0 (unicast 0), sent 0
MAC move: 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
The following
sample outputs shows the backup pseudowire information:
RP/0/RSP0/CPU0:router#show l2vpn forwarding detail location 0/2/CPU0
Local interface: GigabitEthernet0/2/0/0.1, Xconnect id: 0x3000001, Status: up
Segment 1
AC, GigabitEthernet0/2/0/0.1, Ethernet VLAN mode, status: Bound
RG-ID 1, active
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
MPLS, Destination address: 101.101.101.101, pw-id: 1000, status: Bound
Pseudowire label: 16000
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Backup PW
MPLS, Destination address: 102.102.102.102, pw-id: 1000, status: Bound
Pseudowire label: 16001
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
RP/0/RSP0/CPU0:router#show l2vpn forwarding bridge-domain detail location 0/2/CPU0
Bridge-domain name: bg1:bd1, id: 0, state: up
….
GigabitEthernet0/2/0/0.4, state: oper up
RG-ID 1, active
Number of MAC: 0
…..
Nbor 101.101.101.101 pw-id 5000
Backup Nbor 101.101.101.101 pw-id 5000
Number of MAC: 0
….
RP/0/RSP0/CPU0:router#show l2vpn forwarding bridge-domain detail location 0/2/CPU0
Bridge-domain name: bg1:bd1, id: 0, state: up
….
GigabitEthernet0/2/0/0.4, state: oper up
XC ID: 0x1880002
Number of MAC: 0
Statistics:
packets: received 0 (multicast 0, broadcast 0, unknown unicast 0, unicast 0), sent 963770
bytes: received 0 (multicast 0, broadcast 0, unknown unicast 0, unicast 0), sent 263433178
MAC move: 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
Dynamic arp inspection drop counters:
packets: 0, bytes: 0
IP source guard drop counters:
packets: 0, bytes: 0
….
The following
sample outputs displays the SPAN segment information of the xconnect:
RP/0/RSP0/CPU0:router# show l2vpn forwarding counter location 0/7/CPU0
Legend: ST = State, DN = Down
Segment 1 Segment 2 ST Byte
Switched
----------------------------- ----------------------- -- ---------
pw-span-test (Monitor-Session) mpls 2.2.2.2 UP 0
RP/0/RSP0/CPU0:router #Show l2vpn forwarding monitor-session location 0/7/CPU0
Segment 1 Segment 2 State
------------------------------------ ------------------------------------ ------
pw-span-test(monitor-session) mpls 2.2.2.2 UP
pw-span-sess(monitor-session)  mpls 3.3.3.3 UP
RP/0/RSP0/CPU0:router #Show l2vpn forwarding monitor-session pw-span-test location 0/7/CPU0
Segment 1 Segment 2 State
------------------------------------ ------------------------------------ ------
pw-span-test(Monitor-Session) mpls 2.2.2.2 UP
Example 4:
RP/0/RSP0/CPU0:router #show l2vpn forwarding detail location 0/7/CPU0
Xconnect id: 0xc000001, Status: up
Segment 1
Monitor-Session, pw-span-test, status: Bound
Segment 2
MPLS, Destination address: 2.2.2.2, pw-id: 1, status: Bound
Pseudowire label: 16001
Statistics:
packets: received 0, sent 11799730
bytes: received 0, sent 707983800
Example 5:
show l2vpn forwarding private location 0/11/CPU0
Xconnect ID 0xc000001
Xconnect info:
Base info: version=0xaabbcc13, flags=0x0, type=2, reserved=0
xcon_bound=TRUE, switching_type=0, data_type=3
AC info:
Base info: version=0xaabbcc11, flags=0x0, type=3, reserved=0
xcon_id=0xc000001, ifh= none, subifh= none, ac_id=0, ac_type=SPAN,
ac_mtu=1500, iw_mode=none, adj_valid=FALSE, adj_addr none
PW info:
Base info: version=0xaabbcc12, flags=0x0, type=4, reserved=0
pw_id=1, nh_valid=TRUE, sig_cap_flags=0x20, context=0x0,
MPLS, pw_label=16001
Statistics:
packets: received 0, sent 11799730
bytes: received 0, sent 707983800
Object: NHOP
Event Trace History [Total events: 5]
--------------------------------------------------------------------
Time Event Flags
==== ===== =====
--------------------------------------------------------------------
Nexthop info:
Base info: version=0xaabbcc14, flags=0x10000, type=5, reserved=0
nh_addr=2.2.2.2, plat_data_valid=TRUE, plat_data_len=128, child_count=1
Object: XCON
Event Trace History [Total events: 16]
--------------------------------------------------------------------
Time Event Flags
==== ===== =====
-------------------------------------------------------------------
RP/0/RSP0/CPU0:router #show l2vpn forwarding summary location 0/7/CPU0
Major version num:1, minor version num:0
Shared memory timestamp:0x31333944cf
Number of forwarding xconnect entries:2
Up:2 Down:0
AC-PW:1 (1 mpls) AC-AC:0 AC-BP:0 AC-Unknown:0
PW-BP:0 PW-Unknown:0 Monitor-Session-PW:1
Number of xconnects down due to:
AIB:0 L2VPN:0 L3FIB:0
Number of p2p xconnects: 2
Number of bridge-port xconnects: 0
Number of nexthops:1
MPLS: Bound:1 Unbound:0 Pending Registration:0
Number of bridge-domains: 0
Number of static macs: 0
Number of locally learned macs: 0
Number of remotely learned macs: 0
Number of total macs: 0
The following
sample output is from the
show l2vpn
forwarding command:
RP/0/RSP0/CPU0:router# show l2vpn forwarding location 0/2/cpu0
ID Segment 1 Segment 2
-----------------------------------
1 Gi0/2/0/0 1 1.1.1.1 9)
The following
sample output shows the MAC information in the layer2_fib manager summary:
RP/0/RSP0/CPU0:router# show l2vpn forwarding summary location 0/3/CPU0
Major version num:1, minor version num:0
Shared memory timestamp:0x66ff58e894
Number of forwarding xconnect entries:2
Up:1 Down:0
AC-PW:0 AC-AC:0 AC-BP:1 PW-BP:1
Number of xconnects down due to:
AIB:0 L2VPN:0 L3FIB:0
Number of nexthops:1
Number of static macs: 5
Number of locally learned macs: 5
Number of remotely learned macs: 0
Number of total macs: 10
This example shows sample
output for the
show l2vpn forwarding
location command:
RP/0/RSP0/CPU0:router# show l2vpn forwarding location 0/1/CPU0
LC/0/1/CPU0:JSegment 1 Segment 2 State
------------------------------------ ------------------------------------ ---
PBB Edge Bridge id 0, SHG id 0 UP
Gi0/1/0/1.1(Eth VLAN) Bridge id 0, SHG id 0 UP
Gi0/1/0/1.2(Eth VLAN) Bridge id 0, SHG id 0 UP
mpls 1.2.3.4,22 Bridge id 1, SHG id 0 DN
PBB Core Bridge id 2, SHG id 0 UP
This example shows sample
output for the
show l2vpn forwarding
summary location command:
RP/0/RSP0/CPU0:router# show l2vpn forwarding summary location 0/0/CPU0
Major version num:1, minor version num:0
Shared memory timestamp:0x4005e57a0
Number of forwarding xconnect entries:4
Up:4 Down:0
AC-PW:0 AC-AC:0 AC-BP:0 AC-Unknown:0
PW-BP:0 PW-Unknown:0
PBB-BP:4 PBB-Unknown:0
Number of xconnects down due to:
AIB:0 L2VPN:0 L3FIB:0
Number of p2p xconnects: 0
Number of bridge-port xconnects: 4
Number of nexthops:0
Number of bridge-domains: 5
Number of static macs: 0
Number of locally learned macs: 0
Number of remotely learned macs: 0
Number of total macs: 0
This example shows sample
output for the
show l2vpn forwarding
detail location command for IOS-XR 5.3.1 and earlier releases:
RP/0/RSP0/CPU0:router# show l2vpn forwarding detail location 0/1/CPU0
Local interface: TenGigE0/0/0/1/0.1, Xconnect id: 0x80005, Status: up
Segment 1
AC, TenGigE0/0/0/1/0.1, status: Bound
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
Bridge id: 19, Split horizon group id: 0
Storm control: disabled
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled, Accept-Shutdown: enabled
DHCPv4 snooping: profile not known on this node, disabled
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping profile: profile not known on this node
MLD snooping profile: profile not known on this node
Router guard disabled
P2MP PW: disabled
Local interface: PBB Core, Xconnect id: 0x2000001, Status: up
Segment 1
AC, TenGigE0/0/0/1/0.1, status: Bound
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
Bridge id: 19, Split horizon group id: 0
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
This example shows sample
output for the
show l2vpn forwarding
detail location command for IOS-XR 5.3.2 release
RP/0/RSP0/CPU0:router# show l2vpn forwarding detail location 0/6/CPU0
Local interface: TenGigE0/0/0/1/0.1, Xconnect id: 0x80005, Status: up
Segment 1
AC, TenGigE0/0/0/1/0.1, status: Bound
Statistics:
packets: received 0 (multicast 0, broadcast 0, unknown unicast 0, unicast 0), sent 0
bytes: received 0 (multicast 0, broadcast 0, unknown unicast 0, unicast 0), sent 0
MAC move: 0
packets dropped: PLU 0, tail 0
bytes dropped: PLU 0, tail 0
Segment 2
Bridge id: 19, Split horizon group id: 0
Storm control: disabled
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled, Accept-Shutdown: enabled
DHCPv4 snooping: profile not known on this node, disabled
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping profile: profile not known on this node
MLD snooping profile: profile not known on this node
Router guard disabled
P2MP PW: disabled
The following sample output is from the
show l2vpn
forwarding command:
RP/0/RSP0/CPU0:router# show l2vpn for location 0/0/CPU0
Fri May 18 13:56:35.957 EDT
Segment 1 Segment 2 State
------------------------------------ ------------------------------------ ------
Gi0/0/0/4.2(Eth VLAN) l2tpv3 UP
1111:2222::cdef
Gi0/0/0/4.3(Eth VLAN) mpls 1.2.3.4 DN
The following sample output is from the
show l2vpn forwarding
neighbor ipv6 command:
RP/0/RSP0/CPU0:router# show l2vpn forwarding neighbor ipv6 1111:2222::cdef detail loc 0/0/cpu0
Fri May 18 13:58:14.720 EDT
Local interface: GigabitEthernet0/0/0/4.2, Xconnect id: 0x2, Status: up
Segment 1
AC, GigabitEthernet0/0/0/4.2, Ethernet VLAN mode, status: Bound
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
L2TPv3-IPV6, Destination address: 1111:2222::cdef, status: Bound
Source address: 1111:2222::abcd
Local session:
Session ID: -1
Cookie: size 0 bytes
Remote session:
Session ID: -1
Cookie: size 0 bytes
Control word disabled
Sequencing not set
TOS 40 (reflect disabled), TTL 255, DF bit not set
Path MTU: disabled
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
packets dropped: out of sequence 0, other 0
This example shows sample output for the
show l2vpn forwarding
detail location command with P2MP PW enabled on the PW BP for
IOS-XR 5.3.1 and earlier releases.
RP/0/RSP0/CPU0:router# show l2vpn forwarding detail location
Xconnect id: 0xfffc0003, Status: up
Segment 1
MPLS, Destination address: 2.2.2.2, pw-id: 101, status: Bound
Pseudowire label: 16002 Control word disabled
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
Bridge id: 0, Split horizon group id: 1
Storm control: disabled
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled
DHCPv4 snooping: profile not known on this node, disabled
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping profile: profile not known on this node
Router guard disabled
P2MP PW enabled
This example shows sample output for the
show l2vpn forwarding
detail location command with P2MP PW enabled on the PW BP for
IOS-XR 5.3.2 release.
RP/0/RSP0/CPU0:router# show l2vpn forwarding detail location
Xconnect id: 0xfffc0003, Status: up
Segment 1
MPLS, Destination address: 2.2.2.2, pw-id: 101, status: Bound
Pseudowire label: 16002 Control word disabled
Statistics:
packets: received 1000 (unicast 1000), sent 0
bytes: received 128000 (unicast 128000), sent 0
MAC move: 10
Segment 2
Bridge id: 0, Split horizon group id: 1
Storm control: disabled
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled
DHCPv4 snooping: profile not known on this node, disabled
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping profile: profile not known on this node
Router guard disabled
P2MP PW enabled
This example shows sample output for the
show l2vpn forwarding
summary location command displaying number of bridge-domains with
P2MP PW enabled.
RP/0/RSP0/CPU0:router# show l2vpn forwarding summary location
Mon Sep 9 22:07:54.000 EDT
Major version num:1, minor version num:0
Shared memory timestamp:0x547395c50
Global configuration:
Number of forwarding xconnect entries:5
Up:0 Down:5
AC-PW(atom):1 AC-PW(l2tpv2):0 AC-PW(l2tpv3):0
(1 mpls) AC-AC:0 AC-BP:0 AC-Unknown:0
PW-BP:4 PW-Unknown:0
PBB-BP:0 PBB-Unknown:0
Monitor-Session-PW:0 Monitor-Session-Unknown:0
Number of xconnects down due to:
AIB:0 L2VPN:5 L3FIB:0 VPDN:0
Number of xconnect updates dropped due to:
Invalid XID: 0 VPWS PW, 0 VPLS PW, 0 Virtual-AC, 0 PBB
Exceeded max allowed: 0 VPLS PW, 0 Bundle-AC
Number of p2p xconnects: 1
Number of bridge-port xconnects: 4
Number of nexthops:2
MPLS: Bound:2 Unbound:0 Pending Registration:0
P2MP MLDP: Bound:1 Unbound:0 Pending Registration:0
P2MP TE: Bound:1 Unbound:0 Pending Registration:0
Number of bridge-domains: 2 (0 with routed interface, 2 with P2MP enabled)
Number of bridge-domain updates dropped: 0
Number of static macs: 0
Number of routed macs: 0
Number of locally learned macs: 0
Number of remotely learned macs: 0
Number of total macs: 0
Number of total P2MP Ptree entries: 2
MLDP:1 (LMRIB:1) RSVP-TE:0 (LMRIB:0)
The example shows sample
output for the
show l2vpn forwarding
detail command with PW grouping for multi-segment PWs.
RP/0/RSP0/CPU0:router# show l2vpn forwarding detail location
Local interface: GigabitEthernet0/0/0/0.100, Xconnect id: 0x100009, Status: up
Segment 1
AC, GigabitEthernet0/0/0/0.100, Ethernet VLAN mode, status: Bound
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
MPLS, Destination address: 1.1.1.10, pw-id: 100, status: Bound, Active
Pseudowire label: 16000 Control word disabled
NHOP: 1.1.1.10, PW-Group Id: 0x1001
Backup PW
MPLS, Destination address: 3.3.3.30, pw-id: 300, status: Bound
Pseudowire label: 16000
NHOP: 3.3.3.30, Backup PW-Group Id: 0x1002
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
The example shows sample
output for the
show l2vpn forwarding
summary command with PW grouping for multi-segment PWs.
RP/0/RSP0/CPU0:router# show l2vpn forwarding summary location 0/0/CPU0
Tue Jun 18 22:29:47.815 DST
Major version num:1, minor version num:0
Shared memory timestamp:0x182a49b4f9
Global configuration:
Number of forwarding xconnect entries:31
Up:19 Down:12
AC-PW(atom):0 AC-PW(l2tpv2):0 AC-PW(l2tpv3):0
AC-PW(l2tpv3-ipv6):0
AC-AC:3 AC-BP:16 AC-Unknown:0
PW-BP:12 PW-Unknown:0
PBB-BP:0 PBB-Unknown:0
Monitor-Session-PW:0 Monitor-Session-Unknown:0
Number of xconnects down due to:
AIB:0 L2VPN:12 L3FIB:0 VPDN:0
Number of xconnect updates dropped due to:
Invalid XID: 0 VPWS PW, 0 VPLS PW, 0 Virtual-AC, 0 PBB
Exceeded max allowed: 0 VPLS PW, 0 Bundle-AC
Number of p2p xconnects: 1
Number of PW-Group Ids: 1
Number of PW-Group Ids Down: 0
Number of bridge-port xconnects: 28
Number of nexthops:5
MPLS: Bound:0 Unbound:5 Pending Registration:0
P2MP MLDP: Bound:0 Unbound:0 Pending Registration:0
P2MP TE: Bound:0 Unbound:0 Pending Registration:0
Number of bridge-domains: 14
2 with routed interface
0 with PBB evpn enabled
0 with p2mp enabled
Number of bridge-domain updates dropped: 0
Number of total macs: 0
0 Static macs
0 Routed macs
0 BMAC
0 Source BMAC
0 Locally learned macs
0 Remotely learned macs
Number of total P2MP Ptree entries: 0
Number of EVPN Multicast Replication lists: 0 (0 default)
The example shows sample
output for the
show l2vpn forwarding
pwgroup command identifying the PWs of the same PW group as known
by L2FIB.
RP/0/RSP0/CPU0:router# show l2vpn forwarding pwgroup ?
debug Include debug information(cisco-support)
detail Detailed information
location Specify a location
peer-addr PW-Group peer IPv4 address
group-id Provide information for the given PW-Group Id
The example shows sample
output for the
show l2vpn forwarding
pwgroup group-id command with a specified group ID.
RP/0/RSP0/CPU0:router# show l2vpn forwarding pwgroup group-id 0x1001 loc 0/0/cpu0
Xconnect ID 0x1080001
PW info:
Base info: version=0xaabbcc12, flags=0x0, type=4, reserved=0
pw_id=100, nh_valid=TRUE, sig_cap_flags=0x20, context=0x0,
MPLS, Destination address: 1.1.1.10, pw-id: 100, status: Bound, Active
Pseudowire label: 16000 Control word disabled
Redundancy role: active, PW-Group Id 0x1001
Xconnect ID 0x1080008
PW info:
Base info: version=0xaabbcc12, flags=0x0, type=4, reserved=0
pw_id=108, nh_valid=TRUE, sig_cap_flags=0x20, context=0x0,
MPLS, Destination address: 1.1.1.10, pw-id: 108, status: Bound, Active
Pseudowire label: 16000 Control word disabled
Redundancy role none, PW-Group Id 0x1001
The example shows sample
output for the
show l2vpn forwarding
xconnect command.
RP/0/RSP0/CPU0:router# show l2vpn forwarding xconnect 0xfff8000f detail location 0/0/CPU0Mon Jun 20 20:15:32.150 EDT
Xconnect id: 0xfff8000f, Status: up
Segment 1 MPLS, Destination address: 2.2.2.2, pw-id: 100:1001, status: Bound
Pseudowire label: 24055
Control word disabled
Forward-class: 1
Statistics:
packets: received 0 (unicast 0), sent 0
bytes: received 0 (unicast 0), sent 0
MAC move: 0
Segment 2
Bridge id: 0, Split horizon group id: 1
Storm control: disabled
…