Revised OpenConfig Data Model

This releases introduces revisions to OpenConfig data models. For the list of models, the revised version and details, see the Release Notes for Cisco ASR 9000 Series Routers, IOS XR Release 7.5.3

New Unified Models

This release introduces the Cisco-IOS-XR-um-if-mac-address-cfg.yang unified data model to Set or delete a Media Access Control (MAC) address of the Management Ethernet interface, which acts as a unique identifier for the device in the network.

New Unified Models

Unified models are CLI-based YANG models that are designed to replace the native schema-based models. This release introduces new unified models to configure the Fabric Interface ASIC (FIA), Link Aggregation Control Protocol (LACP), Cisco Express Forwarding (CEF) and controller fabric.

You can access these new unified models from the Github repository.

Release 7.5.2

Operational Data Model for EEM Script

You can programmatically retrieve the operational status of events, actions, and policy maps using the YANG data model.

In earlier releases, you used the show event manager command to view the operational status of event scripts.

This release introduces Cisco-IOS-XR-ha-eem-policy-oper.yang and Cisco-IOS-XR-event-manager-policy-map-oper.yang data models.

Release 7.5.2

Automation Scripts for gNMI RPCs

You can create automation scripts to connect to the gRPC Network Management Interface (gNMI) server and interact with the router using gNMIservices. Based on gNMI-defined RPCs, you can use the automation script to connect to the gNMI server, manage the configuration of network devices, and query the operational data.

Release 7.5.2

Add Multiple Events In a Policy Map With a Single EEM Script

With this feature, you can add multiple events to a policy-map with boolean (AND or OR) correlation. EEM triggers the script when correlation defined in the policy-map for the events is true. For example, a multi-event policy-map for event1 and event2 with event1 AND event2 boolean operation is triggered only when both event1 and event2 are true.

Release 7.5.1

Debug Automation Scripts

Use this feature to collect logs that contain debug information for ltraces and tech-support data. These logs aid in troubleshooting whenever the scripts are not working as expected.

This feature introduces the show tech-support script command.

Release 7.5.1

Github Repository for Automation Scripts

You now have access to sample scripts and templates published on the Github repository. You can leverage these samples to use the python packages and libraries developed by Cisco to build your custom automation scripts for your network

Release 7.5.1

Manage Common Script Actions Using YANG RPCs

This feature enables you to use YANG remote procedure calls (RPCs) on Cisco-IOS-XR-infra-script-mgmt-act.yang data model to perform actions on the automation scripts such as add or remove script from the script repository, run, or stop script from running.

Release 7.5.1

Update Automation Scripts from Remote Server

This feature lets you update automation scripts across routers by accessing the master script from a remote site. This eases script management, where you make changes to the master script and then copy it to routers where it is deployed.

This feature introduces the auto-update keyword in the script exec command.

Release 7.5.1

Upgraded IOS XR Python from Version 3.5 to Version 3.9

This upgrade adds new modules and capabilities to create Python scripts and execute the scripts on routers running Cisco IOS XR software. Some of the modules added as part of the upgraded IOS XR Python 3.9 are: hashlib, idna, packaging, pyparsing, six, yaml.

Release 7.5.1

Validate Pre-configuration Using Config Scripts

This feature allows you to use config scripts to validate pre-configuration during a commit operation. You can configure any valid hardware resource such as line cards or interfaces without the resource installed on the router. At a later point, when the resource is available, the script recognises the resource and implements the configuration. This activity saves time, eliminates the need to update and re-validate the script.

Release 7.5.1