Resolved Caveats – Cisco IOS XE Bengaluru 17.4.2
Caveat ID Number |
Description |
---|---|
Router: Incorrect STP forwarding state programming in platform |
|
LOTR : Router show lic CLI does not show port details |
|
Auto negotiation failing when CU SFP connected to 100m port |
|
CEM ACR: Not able to reuse same clock id on another controller After deleted clock id. |
|
RSP3: interface flaps step-by-step issu procedure post sso |
|
Async Line raw-socket packet-length Configure to 0 on Switchover |
|
RSP3: copy recent standby logs & corefiles to Active |
|
Router: BDI interface is causing high cpu usage |
|
Interface counters not incrementing after 2yrs, 22+ weeks on Router |
|
PPPoE tag circuit-id remote-id should not be trusted if the interface is in untrusted mode |
|
HS1 2.43 FPGA commit for reload/brom select issue |
|
BERT is running cannot remove mode observed while running BERT on unframed mode |
|
On XE 17.4.1 , for mode VT1-15 , when counters are enabled on controllers , o/p of LOP is showing IP |
|
Ingress Policy with set qos-group action is creating extra TCAM entry with match on Egress Policy |