- Feature History
- Configuring Support of 1 port OC-48/STM-16 or 4 port OC-12/OC-3 / STM-1/STM-4 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module
- Configuring CEM
- Configuring T1 Interfaces
- Configuring T3 Interfaces
- CEM Pseudowire
- Clock Recovery System for SAToP
- CEM over MPLS QoS
- Configuring SONET
- Configuring SDH
- STS-1 Electricals
- Unidirectional Path Switching Ring Over HDLC
- Interworking Multiservice Gateway Access Circuit Redundancy
- Serial Interfaces
Feature History
The following table lists the new and modified features supported in the 1 port OC-48/ 4 port OC-12/OC-3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide in Cisco IOS XE 16 releases.
|
Feature Name |
Cisco IOS XE Release |
|---|---|
|
Interworking Multiservice Gateway Access Circuit Redundancy |
16.11.1 |
|
IPv4 Layer 3 Termination on HDLC or PPP Serial Interfaces |
16.11.1 |
|
Unidirectional Path Switching Ring Over HDLC |
16.11.1 |
|
3G CEM LC support with RSP3 400G |
16.9.1 |
|
HDLC or PPP to Ethernet IPv4 Interworking Pseudowire |
16.9.1 |
|
Support for STS-1e |
16.9.1 |
|
Far-end Performance Monitoring Support |
16.8.1 |
|
Loopback Remote on T1 and T3 Interfaces |
16.8.1 |
|
Support of DS1 Framed Structure-Agnostic TDM over Packet (SAToP) |
16.8.1 |
|
Support of DS3 Circuit Emulation over Packet (CEP) |
16.8.1 |
|
5G Synchronous Digital Hierarchy Support on 1-port OC48/ 4-port OC12/OC3 + 12-port T1/E1 + 4-port T3/E3 CEM Interface Module |
16.7.1 |
|
3G Synchronous Digital Hierarchy Support on 1-port OC48/ 4-port OC12/OC3 + 12-port T1/E1 + 4-port T3/E3 CEM Interface Module |
16.7.1 |
|
Port Licensing Support |
16.7.1 |
|
Configuring Data Communication Channel |
16.6.1 |
|
Configuring MSP on 1-Port OC192/STM-64 or 8-Port OC3/12/48/STM-1/-4/-16 Module |
16.6.1 |
|
Configuring SDH on 1-Port OC192/STM-64 or 8-Port OC3/12/48/STM-1/-4/-16 Module |
16.6.1 |
|
Configuring SNCP on 1-Port OC192/STM-64 or 8-Port OC3/12/48/STM-1/-4/-16 Module |
16.6.1 |
Feedback