- Feature History
- Configuring CEM
- CEM over MPLS QoS
- Configuring SONET
- Configuring SDH on 1-Port OC-192/STM-64 or 8-Port OC-3/12/48/STM-1/-4/-16 Module
- Configuring MSP on 1-Port OC192/STM-64 or 8-Port OC3/12/48/STM-1/-4/-16 Module
- Configuring SNCP on 1-Port OC192/STM-64 or 8-Port OC3/12/48/STM-1/-4/-16 Module
- Clock Recovery System for SAToP
- Configuring 5G Mode on 1-Port OC-192/STM-64 or 8-Port OC-3/12/48/STM-1/-4/-16 Interface Module
- Configuring Data Communication Channel
- Transparent Overhead Tunneling Data Communication Channel
- Target Identifier Address Resolution Protocol
- Configuring Support for ASR 900 Combo 8-Port SFP GE and 1-Port 10 GE 20G Interface Module (A900-IMA1Z8S-CXMS)
Feature History
The following table lists the new and modified features supported in the 1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide in Cisco IOS XE 16 releases.
|
Feature Name |
Cisco IOS XE Release |
|---|---|
|
Psuedowire Scale Support |
16.12.1 |
|
8-Port SFP GE and 1-Port 10 GE 20G Interface Module Support |
16.12.1a |
|
Transparent Overhead Tunneling Data Communication Channel |
16.9.1 |
|
Support of DS1 Framed Structure-Agnostic TDM over Packet (SAToP) |
16.8.1 |
|
Loopback Remote on T1 and T3 Interfaces |
16.8.1 |
|
Far-end Performance Monitoring Support |
16.8.1 |
|
CESoPSN |
16.7.1 |
|
5G Traffic on 1-Port OC192/STM-64 or 8-Port OC3/12/48/STM-1/-4/-16 Interface Module |
16.5.1 |
Feedback