Time Division Multiplexing Configuration Guide, Cisco IOS XE 17 (Cisco ASR 920 Series)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 25, 2024

Chapter: Feature History

Feature History

Feature History

The following table lists the new and modified features supported in the Time Division Multiplexing Configuration Guide in Cisco IOS XE 17 releases.


Feature	Description
Cisco IOS XE Dublin 17.10.1
TSoP Support for the ASR-920-12CZ-A and ASR-920-12CZ-D	TSoP SSFP support is extended to the ASR-920-12CZ-A and ASR-920-12CZ-D chassis.
Cisco IOS XE Cupertino 17.7.1
Framed SAToP support for T3 Smart TPoP pluggable	[/bookmap/reference/refbody/section/table/tgroup/tbody/row/entry/p {"p"}) You can configure the following features for T3 in framed mode: (p] [/bookmap/reference/refbody/section/table/tgroup/tbody/row/entry/ul/li/p {"p"}) Loopback, framing, line code encoding, cable length, and jitter buffer (p] [/bookmap/reference/refbody/section/table/tgroup/tbody/row/entry/ul/li/p {"p"}) BERT (p] [/bookmap/reference/refbody/section/table/tgroup/tbody/row/entry/ul/li/p {"p"}) Performance monitoring counters and alarms (p] [/bookmap/reference/refbody/section/table/tgroup/tbody/row/entry/ul/li/p {"p"}) Alarm profiling (p] [/bookmap/reference/refbody/section/table/tgroup/tbody/row/entry/ul/li/p {"p"}) Clock recovery modes (p] [/bookmap/reference/refbody/section/table/tgroup/tbody/row/entry/p {"p"}) These features that are configured on framed and unframed T3 interfaces help you to monitor the traffic and troubleshoot errors or failures efficiently. (p]
Cisco IOS XE Bengaluru 17.6.1
Support for T1 framed Smart TPoP pluggable	You can configure the following features for T1 in framed mode: Loopback, framing, line code encoding, cable length, and jitter buffer BERT Performance monitoring counters and alarms Alarm profiling Clock recovery modes These features that are configured on framed and unframed T1 interfaces help you to monitor the traffic and troubleshoot errors or failures efficiently.
Support for E1 framed Smart TPoP pluggable	You can configure the following features for E1 in framed and unframed modes: Loopback, framing, line code encoding, cable length, and jitter buffer BERT Performance monitoring counters and alarms Alarm profiling Clock recovery modes These features that are configured on framed and unframed E1 interfaces help you to monitor the traffic and troubleshoot errors or failures efficiently.
Support for TSoP SSFP Dejitter Buffer Tuning	TSoP SSFP Dejitter Buffer Tuning is applicable only for T1 smart SFP.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)