The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes open and resolved severity 1 and 2 caveats and select severity 3 caveats:
The “Open Caveats” sections list open caveats that apply to the current release and may apply to previous releases. A caveat that is open for a prior release and is still unresolved applies to all future releases until it is resolved.
The “Resolved Caveats” sections list caveats resolved in a specific release, but open in previous releases.
The bug IDs are sorted alphanumerically.
 Note |
The Caveats section includes the bug ID and a short description of the bug. For details on the symptoms, conditions, and workaround for a specific caveat you must use the Bug Search Tool. |
Cisco Bug Search Tool (BST), the online successor to Bug Toolkit, is designed to improve effectiveness in network risk management and device troubleshooting. You can search for bugs based on product, release, and keyword, and aggregates key data such as bug details, product, and version. For more details on the tool, see the help page located at http://www.cisco.com/web/applicat/cbsshelp/help.html
There are no open caveats for this release.
|
Caveat ID Number |
Description |
|---|---|
|
ASR902-RSP2 crashed after BGP flaps |
|
|
IPv6 BGP update is not applied after changes to inbound route-map |
|
|
Changing external route tag does not update origin code in BGP |
|
|
IPSLA UDP-jitter: Packets are sent at appx 2ms less or more than the config packet interval |
|
Caveat ID Number |
Description |
|---|---|
|
REP flapping randomly and frequently due to port down |
|
Caveat ID Number |
Description |
|---|---|
|
Dynamic neighbor does not form when peer-group is shutdown in different vrf |
|
|
BMP BGP server can lead to CPUHOG and crashes |
|
|
Traceback: IP SLA triggers INJECT_HDR_LENGTH_ER and INJECT_FEATURE_ESCAPE log message |
|
|
BGP: advertised community list is malformed due to GSHUT community |
|
|
BGP fall-over not working when Null0 static route is configured |
|
|
Pseudowire interface may be unexpectedly removed from VFI on unrelated configuration change |
|
|
BGP IPv6 link-local session does not come up |
|
Caveat ID Number |
Description |
|---|---|
|
Traffic drops observed with IPSec traffic |
|
|
Crash while IPV6 updating prefixes |
|
|
Traffic failure due to MPLS ECMP load-balancing in one of the labelled path |
There are no platform independent open caveats for this release.
|
Caveat ID Number |
Description |
|---|---|
|
OBFL updation with valid time after NTP Sync in RTC failure case |
|
|
MPLS TE is not coming UP when bandwidth configured on head end |
|
Caveat ID Number |
Description |
|---|---|
|
SR Labels not installed in forwarding plane when there are multiple sources for the prefix SID |
|
|
C1111 telnet refused for link-local addresses when using ipv6 access class |
|
Caveat ID Number |
Description |
|---|---|
|
T1 serial interface goes down with encapsulation mode as PPP with remote loopback config as iboc. |
|
|
VTY configuration changes transport input protocols |
|
Caveat ID Number |
Description |
|---|---|
|
ASR 920 VTY lines higher than 5 cannot be configured NVGEN |
|
|
ASR 920 traffic drops observed with IPSec traffic |
|
Caveat ID Number |
Description |
|---|---|
|
T1 serial interface goes down with encapsulation mode as PPP with remote loopback config as iboc. |
|
|
VTY configuration changes transport input protocols |
|
Caveat ID Number |
Description |
|---|---|
|
IP SLA can trigger crash when used with MPLS probe |
|
|
MSPW VC is down after Switchover (Error Local access circuit is not ready for label advertise) |
|
|
After RSP switchover label, imposition is not programmed in Software on APS standby router |
|
|
The app-hosting fails with ip unnumbered configuration in Virtual PortGroup |
|
|
QoS fails to apply to tunnel2 when underlying tunnel1 reachability change |
|
|
Device-tracking tracking 0.0.0.0 mask is ignored after Legacy IPDT to SISF conversion |
|
|
|
|
SDA Fabric Multicast - Unable to calculate RPF from LISP |
|
|
Evaluation of all for TCP_SACK |
|
|
BGP YANG oper address-family fails with vpnv4-unicast |
|
|
Crash in IGMP code occurs due to invalid source count in DNS lookup |
|
|
BGP PIC Repair path breaks after link flap |
|
|
HSRPv2 crashes while retrieving group from received packet |
|
|
BGP improperly formats the BGP ASSET attribute if ASSET attribute length is beyond 255 |
|
|
AutoRP listener functionality issue occurs |
|
|
mGRE L3VPN is broken after reload |
|
|
IP SLA for Path-Jitter returns a value that is not defined by the MIB |
|
|
VPLS label misprogramming occur after RSP switchover |
|
|
Smart licensing PID and SN logs fill up the IOSRP tracelogs |
|
|
LISP map cache is not updated correctly after wired Host-mobility |
|
|
Router crashes after receiving EVPN route-type 2 without any ext-community |
|
|
IGP metric is not detected in MPLS TE topology |
|
|
Adjacency SIDs are not detected in MPLS TE topology (interop issue) |
|
|
LISP: Block adding SVI (anycast gateway) MAC address to LISP ethernet database after SVI reconfiguration is noticed |
|
|
Upon redundancy failover, route is purged on downstream device |
|
|
BGP looped update among 3 peers |
|
|
Crash on BGP Router process |
|
|
C9200L kernel jumbo packets |
|
|
Unexpected reload when issuing show ip mroute vrf vrf command |
|
|
Removing pseudowire-class for 1 peer makes all the peers fail |
|
|
TBs seen with scaled IP SLA configurations with ip sla reset command |
|
| PNP fails with Dual Supervisor with non default startup vlan | |
|
BGP Loss of RPKI Table |
|
|
CBR 8/L2VPN : Toggle of PW-Status-TLV causes Backup PW to remain DOWN |
|
Caveat ID Number |
Description |
|---|---|
|
BFD remains down when using PBR on BDI interface |
|
|
Ingress QOS marking is corrupted for L3VPN traffic with egress QoS policy that matches mpls exp on router. |
There are no new open caveats in this release.
There are no new resolved caveats in this release.
|
Caveat ID Number |
Description |
|---|---|
|
Router crashes at hashtable_get_nth_entry |
|
|
ToD UBX Format - Incorrect header and checksum calculation are noticed |
|
|
After IPv6 nd cache expires, transit traffic fails when ECMP is performed |
|
|
Ingress QOS marking corrupted for L3VPN traffic with egress qos policy matching MPLS EXP on router |
|
Caveat ID Number |
Description |
|---|---|
|
ATOM CW is not exchanged after node reload |
|
|
ASR920: CFM remote endpoint with backup pseudowire points to primary peer IP in HSPW |
|
|
ICMP echo probe is successful when the source interface does not have the IP address |
|
|
Memory leak is observed at hman process |
|
|
ASR-920:MVPN: Unable to pass high MTU multicast packets-MDT-MTU |
|
|
Interface is not joined to mcast map-notify after reload |
|
|
DHCP discover packets are dropped at firewall since UDP source port is set as 0 |
|
|
The in.telnetd process consumes 100% CPU in show process |
|
|
Wrong label programming leads to traffic drop |
|
|
Spurious accesses are seen in show alignment output with BGP |
|
|
ASR920 CSDL: Cisco ASR-920-12SZ-IM Secure FPGA |
|
|
ASR920 CSDL Secure FPGA |
|
|
ASR920 CSDL : Cisco ASR-920-24TZ-M, Cisco ASR-920-24SZ-M, Cisco ASR-920-24SZ-IM secure FPGA |
|
|
Router crashes when tod-clock revertive command is executed |
|
|
Router crashes during SNMP configuration, ospfv3_pdb_from_router_info |
|
|
MPLS trace-route shows pre-mature termination of LSP |
|
Caveat ID Number |
Description |
|---|---|
|
Tunnel stats are not working after FRR cutover |
|
|
Unpredictable asymmetry on T1/E1 IM |
|
|
C3794 controller displays down state with traffic flow |
|
|
Portchannel 61-64 is not supported in 16.9.3 |
|
Caveat ID Number |
Description |
|---|---|
|
LLDP TX not working on few ports after the router is reloaded |
|
Caveat ID Number |
Description |
|---|---|
|
Router crash seen in soak run on previous image |
|
|
ASR920 cylon_mgr crash. |
|
|
A900-IMA4OS module reload with controller mode change |
|
|
ASR920-BDI IPv6 ping failure_FMFP_OBJ_Download_Failure |
|
|
QIP-TOD flaps in Cisco ASR-920-12SZ-IM and ASR-920U-12SZ-IM (master) when setup is left overnight |
|
|
On upgrading the node using ISSU from an image where we have the issue outlined in CSCvn07765 to an image having the fix we expect the CU SFP ports to go down after ISSU completion. Workaround to get the ports up again is to flap the ports once. |
|
|
BDI IPv6 ping failure_FMFP_OBJ_Download_Failure |
|
|
Ping failed and interface came up or is up on ZR with local fault detected. |
|
|
One of the instances in G.8032 close ring stuck in protection state post reload |
|
|
Node resets with router crash |
|
|
SD card issues : Timeout waiting for hardware interrupt. |
|
Caveat ID Number |
Description |
|---|---|
|
IS-IS Node Cache may consume excessive CPU |
|
|
OBS: router bgp af network mask does not sync to CBD on reload/full-sync |
|
|
IOS-XE can not build SR-TE towards SR node without mpls-te enabled |
|
|
Cisco-IOS-XE-bgp YANG model needs proper handling for neighbor <ip> activate command with peer-groups |
|
|
in.telnetd process consumes 100% CPU in show process cpu platform sorted |
|
Caveat ID Number |
Description |
|---|---|
|
ALARM_SYNC_FAIL alarm seen with slave Phase Aligned and sync packets are incrementing <167> |
|
|
Time-stamp engine stats are very slow and it is not showing at right port. |
|
|
TDM traffic in priority queue affected with 9,000 bytes size packet of transit data traffic |
|
|
The negotiation auto configuration gets removed from dual rate ports post node Hard reset/Power cycle |
|
|
Last reload reason seen as "Reload command" after upgrade to V169 from 316.7 CCO |
|
|
SVSP-279 - NCS4202 EVC egress policy shows drop rate counters as 0 |
|
|
High reconvergence of 2 seconds in case of local failover recovery on hot-spring |
|
|
Ping fail over EVC Local Connect circuit (arp request getting dropped) |
|
|
On shutting backup ABR, traffic drops observed for 6PE over primary ABR drops |
|
|
One VLAN traffic is not flowing in scaling BCPoMLPPP with 64 VLANs |
|
|
E1 interfaces go DOWN on remote alarm (RDI) |
|
Caveat ID Number |
Description |
|---|---|
|
Router may reload in BGP Router process when interface flap occurs with IPv6 MPLS per vrf routes |
|
|
Strict SID has NOT been enabled in ISIS segment-routing |
|
|
Subscriber session hangs after the upgrade and reload |
|
|
Host crashes the DSP if ipv6 commands are configured under Service-Engine [Purge ipv6 config option] |
|
|
Crash under AFW_application_process with shared-line configuration |
|
|
CUBE does not forward 200 OK in SRTP-RTP scenario with TCL script on Dial-peer |
|
|
TCP closed when using Virtual IP HA(high availability)setup with WSAPI registration |
|
|
ISR not recalcluating the hash value correctly after payload change |
|
|
Configuring more than 5k NAT entries cause high CPU utilization with no traffic. |
|
Caveat ID Number |
Description |
|---|---|
|
Clock class showing 248 on changing clock class of master show ptp port running |
|
|
Interface flap issues in ASR920 register in ES5 |
|
|
Cisco ASR-920-12SZ-A and Cisco ASR-920-12SZ-D: license status not shown for 1588 feature |
|
|
AIS: box crashed at zl303xx_AprRemoveServer |
|
|
Cisco ASR-920-12SZ-A and Cisco ASR-920-12SZ-D: REFSYNC pair is not getting removed while moving from 75.1 Master to default BC |
|
|
HS1: Kernel MMI Read Crash on Enabling IP SLA and PTP |
|
|
Cisco ASR-920-12SZ-A and Cisco ASR-920-12SZ-D: PTP flap between PHASE ALIGNED and FREQUENCY LOCK with 9,000 bytes data packets in transit |
|
|
BFD DDR BUSY condition not recovered |
|
|
OBFL logging for SBE/MBE FPGA interrupts |
|
|
Router crash seen in previous soak run |
|
|
Ethernet SLA tracking not working for Xconnect UP mep sessions (DMM/1DMM) |
|
|
Onboard option missing for show logging CLI |
|
|
BFD flap during DDR3 Busy recovery |
|
|
MLDP:Router crashed after breaking the core link with recursive enabled |
|
|
RP-reset when show pla har pp act commd is executed for the failed object after EMPLSintd exhaust |
|
|
8xT1E1 Adaptive Clock Recovery in UNKNOWN status |
|
|
ACR fails with -/+ 50 ppm tolerance |
|
|
DATAINCONSISTENCY observed with VFI and XCONNECT configuration during reload |
|
Caveat ID Number |
Description |
|---|---|
|
IOS-XE Fails to correctly populate RTCP SSRC Field |
|
|
ASR CUBE 1K reloaded with reason: RG-application reload on voice-b2bha RG |
|
|
CME with external SIP trunk registration results into crash |
|
|
Voice VRF with No Bind OPTIONS Ping response not sent |
|
|
Crash after failing to modify xcode |
|
|
Crash during Generic Call Filter Module cleanup |
|
|
Crash in XDR process: "fib_rp_table_broker_encode_buf.size <= FIB_RP_TABLE_BROKER_ENC_BUF_SZ" |
|
|
ISR4K PPE ucode crash when processing ipsec traffic on CWS tunnel |
|
|
OSPF originates default route without "default-information originate" |
|
|
OSPF routing loop for external route with multiple VLINKs/ABRs |
|
|
VASI NAT: FTP ALG translation is sometimes failed |
|
|
PKI:-IP address parsing issue while printing the subject name if classless IP is used in Trustpoint |
|
|
CSR1k-FlexVPN: Spoke to Spoke: Implicit NHRP entry due to expired resolution request handling. |
|
|
Router returns 255 length byte-stream chars instead of actual length for OSPFV2 Key-string |
|
|
OSPF SR uloop : After issuing clear ip ospf process OSPF process crashed. |
|
|
BGP high CPU when config 256k vxlan static route |
|
|
Hoot-n-holler multicast traffic marked with DSCP 0 |
|
|
CUBE is using wrong source IP address to send SIP error |
|
|
BGP crash while running show command and same time BGP peer reset |
|
|
Unable to remove command ip nat inside destination |
|
|
Modification to ZBFW access-lists do not reflect in TCAM |
|
|
When using VRF NAT port used for ftp data is not freed |
|
|
Router crash in ISIS with SR Ti-LFA |
|
|
MGCP status remains Down after IOS upgrade caused by CSCvh70570 |
|
|
High Availability system with two Voice Gateways - Crash |
|
|
Crash when shifting the layer 2 LACP member peer from one link to another |
|
|
Router crash - AFW_application_process |
|
|
Initial contact in IKEv1 phase 2 rekey (QM1) causes all crypto sessions to drop |
|
|
Random crash of data plane with SRTP-SRTP / SRTP-RTP load tests |
|
|
Crash due ZBF + NAT |
|
|
Extension Mobility Not working when used with Greek locale on SIP CME |
|
|
CUBE incorrectly fomats SIP SDP |
|
|
No calls shown in output show call active voice brief on CUBE & stale entries are present |
|
|
CUBE is not responding to SIP INFO |
|
|
Observed IPv6 Adj memory leaks |
|
|
Incorrect Contact port 5060 used instead of 5061 by CUBE in 302 Moved Temporarily message |
|
|
%FMFP-3-OBJ_DWNLD_TO_DP_FAILED:fman_fp_image:xxx" appears when configured ip port-map on Router |
|
|
ICMP unrechables are not sent to the client on C1117 platform |
|
|
Rework need on CSCvj59170 to support SDP parsing |
|
|
CPP-mcplo-ucode crash while encrypting SIP packets with ALG NAT for SIP |
|
|
SIP CME Crashes when Calling Shared Line |
|
|
CME/BE4K: Corrupted config file for Auto Registered IP Phones after reload |
|
|
ACL dropping packets after updating it - %CPPEXMEM-3-NOMEM |
|
|
Crash due to communication failure - IPC (Inter-Procedure Call) messages between DSP and RP. |
|
Caveat ID Number |
Description |
|---|---|
|
Serial IM LEDs shows inconsistent behavior while performing SSO |
|
|
IOT: A900-IMASER14A/S disconnected clients are not sending any notification |
|
|
RS232 A900-IMASER14A/S, when continous traffic is sent without interframe gap, RX<TX with end to end traffic |
|
|
BGP Link Bandwidth community gets corrupted for a large values |
|
|
BGP PIC/Max-paths:150K scale device stuck with pending issues for huge time with network changes |
|
|
Media-info,status, oper-config fields wrong in port phy status command |
|
|
Unpredictable asymmetry across the port on C37.94 IM |
|
|
Attaching E1 serial interface with multilink group failed |
|
|
OSPF TILFA: SRLG protect tilfa path computation ALGORITHM fails due to wrong directly connected flag |
|
|
ALARM_SYNC_FAIL alarm seen with slave Phase Aligned and sync packets are incrementing |
|
|
8xT1E1 Adaptive Clock Recovery in UNKNOWN status |
|
|
Clock class showing 248 on changing clock class of master show ptp port running |
|
|
CLI show ptp port running showing 187 clock class and its own clock identity |
|
|
ISIS SRTE: verbatim tunnels stay UP even if the IGP is shut (happens after fail over) |
|
|
RS232 A900-IMASER14A/S failing due to punt issue in datapath |
|
|
Channelized T3 function is setting DS2 X bits to 0 for normal condition |
|
|
Slow convergence when configuring ha-mode sso for IPv6 peers |
|
|
Display full IPv6 address in sh l2tp tunnel |
|
|
UDLD Err Disable (Admin down) observed on migration from customer v155 to v166 label . |
|
|
Alarm is not asserted when we do no mode and mode on vt1.5 and ct3 with alarm injected (arrive ) |
|
|
ACR fails with -/+ 50 ppm tolerance |
|
|
Traceback seen while loading image in Active and standby |
|
|
Ti-LFA Repair Path is not Loop-Free |
|
|
2 way time error drifts 1 us in just 15-20 minutes after locking 23 hours to PL |
|
|
show ptp port running and detail showing incorrect clock IDS. |
|
|
MPLS TTL decremented during PHP process on ASR920 |
|
|
Rx getting dropped at Master after losing its 10M input. |
|
|
RS232 A900-IMASER14A/S serial interface output stats are not incr and no end to end traffic. |
|
|
RS232 A900-IMASER14A/S line and pattern issues in Albedo with different data/stop bits. |
|
|
Higher latency with E&M traffic |
|
|
PPPoE packets (PADI PADO PADR PADS PADT) counters are not getting incremented after SSO |
|
|
Overly aggressive initial SPF delay timer is configured SR uloop does not take effect |
|
|
X.21: Serial IM flaps/hangs when CEM interface allows to config clock rates 4032000 and 8064000. |
|
|
SAP: YANG: Yang model for arp entries is missing arp alias support |
|
|
IPv6 AAA Prefix Support for 3rd party PPP clients no password for -dhcpv6 Access-Request |
|
|
CPUHOG observed when rs232 A900-IMASER14A/S config and unconfig on ASR920. |
|
|
IOS thread disabled interrupt Tracebacks seen with r232 A900-IMASER14A/S session |
|
|
RS232: multiple session establishment failures leads to event memory exhaustion in clients |
|
|
ENM IM: Frame and Pattern errors see with Type TO in default operation mode(2-wire). |
|
|
ARP reply not accepted if sourced from nat alias address in other VRFs |
|
|
X21: CEM ingress and Egress counters are not incrementing for different clock rates. |
|
|
VCoP BERT test to a physical loop |
|
|
IOT: Issue with duplex mode while creating RS422 Service |
|
|
VRF stuck in deletion mode |
|
|
Mgmt Port Duplex(right) LED is off even port in duplex full state |
|
|
Router crashed while configuring A900-IMASER14A/S raw-tcp service post OIR. |
|
|
RS232 - traffic fails with parity values except default |
|
|
RS232 A900-IMASER14A/S: Pattern(SLIP) issues seen with higher raw-socket packet-length values(>510) |
|
|
ASR920 crash in ISIS with SR Ti-LFA |
|
|
RS232 A900-IMASER14A/S: IM rebooted and IFCFG_CMD_TIMEOUT traces seen with OIR. |
|
|
RS232 A900-IMASER14A/S: raw TCP sessions are up even tough cable is not connected. |
|
|
QoS stats process crash |
|
|
Netflow FPGA upgrade leading to kernel crash and box hang with version 02. |
|
|
LMM counters are not getting updated by SSFP - UP/DOWN direction |
|
|
Kernel MMI Read Crash on Enabling IP SLA and PTP |
|
|
Down MEP SLA status showing as 0 |
|
|
10M remains in lock state and REF remains OK even after cable pull |
|
|
kernel crash on soak with mac learning /clear |
|
|
GNSS LED behaviour is not as per the specifications |
|
|
Support IPsec feature with metro IP access license. |
|
Caveat ID Number |
Description |
|---|---|
|
ENH: IOS-XE should allow ip address dhcp on Tunnel interfaces |
|
|
EVENTLIB-3-CPUHOG: SIP1: iomd traceback observed while doing SSO |
|
|
Exxx EIN: G.8275.1 testing: Clock loop forming between synce and ptp |
|
|
Max of ECMP path to 8 |
|
|
Crashes @ fillin_mempool_pc_array, mempool_pc_summary_tty |
|
|
TE auto-bw: Incorrect bandwidth requested on soaking with traffic |
|
|
Conditional EXP Marking for BDI+EVC |
|
|
QoS: Configuration failed. Can not configure more than one access-group per class |
|
|
Dynamic stream are getting deleted on ASR920 router with G8275.2 profile with Timing THS |
|
|
MPLS IP support over Routed VPLS. |
|
|
IOT: In SERIAL controllers, the clock-rate value 128000 is not shown in show running-config all |
|
|
Placeholder to support multiple EFPs per port with BDI |
|
|
MAC-FLAP-Syslog-Not generated for TEFP BDs |
|
|
Router crashed at dl_callback |
|
|
configuration of A900-IMASER14A/S replacement with CEM configuration blocks all configurations on interface |
|
|
UTC Offset is NOT taken care properly when VP is selected. |
|
|
configured priority2 under ptp clock is not sent downstream when T- BC selected VP |
|
|
Unable to retrieve stream with G8275.2 profile ASR920 Timing THS |
|
|
DS3 VCOP AIS raised for J1 byte mismatch |
|
|
G275.2 Huge TIE jump seen on slave after reload completes on master |
|
|
DDR Busy and Calibration handling in FPGA software driver |
|
|
G8265.1: huge TIE deviation while master is lost and regained continuously. |
|
|
G8265.1: PTP flaps between HOLDOVER and LOCKED with 64/64 packet rate and HOTSTANDBY |
|
|
Require varbind entSensorPrecision,Scale & Type along with trap entSensorThresholdNotification |
|
|
AMS port netsync is not up on reload |
|
|
VPLS Backup PW: Enable member bdi CLI under l2vpn xconnect context |
|
|
Router gets rebooted with PTP master switch |
|
|
Uea-mgr crashed while trying to install a label entry in kbp(update case) |
|
|
To throw warning and reject the priority configuration in class-default |
|
|
P node ECMP loadbalancing failing for ip traffic |
|
|
DHCPNAK is not sent in roaming scenario. |
|
|
TOD cisco format was broken. |
|
|
IOT: Admin and Oper state of C37.94 controller are not proper in SNMP IfTable |
|
|
G.8275.1: Unable to scale the number of ports beyond 8. |
|
|
920-TDM-OCX : Automatic EEPROM Update required |
|
|
IoT[T1E1 CAS]: CEM counters are getting zero after delete/recreate cem-group with CAS |
|
|
IGMP multicast SSM-map with DNS doesn't work with IGMPv3 |
|
|
Traceback seen in ASR920 TDM THS tb |
|
|
Unexpected Reboot following 'show platform software adjacency oce [ID]' |
|
|
NULL remote_hostname from LAC |
|
|
RS232 when no chan-group is done sessions are not getting removed |
|
|
%SYS-3-TIMERNEG:Cannot start timer with negative offset Process= ARP Background |
|
|
Configuration of BGP auto-summary using NETCONF fails |
|
|
standby rp crash on removing member link from port-channel |
|
|
DHCP Leasequery Padding contains previously used data |
|
|
ENM flaps/hangs on configuring CEM interface |
|
|
G.8265.1- SYNC and Delay Request are not being injected at ASR920 with VRF. |
|
|
PTP Holdover Timer resets to zero as soon as QL Flap in the event of double failure |
|
|
Stream is still active though the clock port deleted at master. |
|
|
Conditional marking not working for new policy-map when all 3 marker profile are used |
|
|
RS232: router reloads when traffic is sent in both directions simultaneously |
|
|
show ptp port virtual showing Signal Fail as True eventhough the port is up |
|
|
PTP over IMA8Z and IMA2Z is not working |
|
|
With HSRP Loop ,Unicast ARP Packet drops due to Br Q choke |
|
|
RS422 service is not working on ports 0 to 3 |
|
|
Default clock class 6 without input 1pps config |
|
|
AG1 CLI command show ptp port running detail not showing output |
|
|
Adding one more VLAN tag to the existing service instance causing entire traffic to drop |
|
|
Type TO is not working for different payload sizes |
|
|
IOT: Issue with A900-IMASER14A/S Packet length default value |
|
|
RS232 A900-IMASER14A/S: IOSXE-WATCHDOG - Router crashed while performing OIR |
|
|
G8275: Clock class value is 6 even when TOD is removed in TGM |
|
|
RS232 A900-IMASER14A/S: line and pattern issues in Albedo with different data/stop bits. |
|
|
Memory leaks seen when sync RS232 A900-IMASER14A/S service is unconfigured and re-configured |
|
|
%SPA_SERIAL_IM-3-NULL_DATA_STRUCTURE: NULL pointer detected: msg in set destination address |
|
|
Policy-map on Multilink interface interrupts ARP |
|
|
DHCP server with option 249 pushes only the routes confiugred in the first instance. |
|
|
IOT: Issue with duplex mode while creating RS422 Service |
|
|
Not able to see the physical-layer configuration under show run command |
|
|
EM IM: Dejitter Buffer Not Taking Effect on IM or Router Bootup |
|
|
Support IPsec feature with metro IP access license |
|
|
QoS: Configuration failed. Cannot configure more than one access-group per class |
|
|
Need to accept user configurable 4-Wire E and M CEM payload and dejitter buffer values |
Feedback