The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The following table lists the new and modified features supported in the Upgrading the Software on the Cisco ASR 920 Series Routers in Cisco IOS XE 17 releases.
Feature | Description |
---|---|
Cisco IOS XE Bengaluru 17.6.1 |
|
This feature allows you to manually upgrade the firmware of the power supply monitoring device in a router. The firmware upgrade reduces unplanned hardware-related downtime caused by input voltage transients during a power outage. |
|
Cisco IOS XE Bengaluru 17.5.1 |
|
After primary ROMMON version is auto upgraded, secondary ROMMON version auto upgrade process takes place. The secondary ROMMON upgrade is only completed during the next planned manual reload of the router. |
|
Cisco IOS XE Bengaluru 17.4.1 |
|
The features uses the following command to provide enhanced security to the routers: platform secure-cfg When you enable the command, the router does not boot if the SD card is replaced, swapped, or modified externally. Thus, you cannot format the SD card externally and this prevents the misuse of the router. |