Use the following commands to enable the monitoring of a subscriber.

monitor subscriber supi subcriber_id capture-duration duration_in_seconds  

NOTES:

• supi subcriber_id : Enables monitoring of subscribers based on the subscriber identifier (supi). For example: 0000.4096.3e4a.

  The subscriber-id format supported is as follows:

  <mac-adress>@<upf>: This specifies a particular subscriber with the given MAC address from a specific User Plane function (UPF).

  Wildcard subscriber-id is also supported. For example:

  • *@<upf>: This specifies all subscribers from a specific UPF.

  • <mac>@*: This specfies all subscribers having the given MAC and from any UPF.

  • *: This specifies all subscribers from all UPFs.

• capture-duration : Specifies the duration in seconds during which the monitor subscriber is enabled. The duration_in_seconds can range from 1 to 2147483647 seconds. The default is 300.

• Other sub-options that are present in the CLI command are not supported

Example

bng# monitor subscriber supi aabb.0000.0001@automation-userplane
supi: aabb.0000.0001@automation-userplane
captureDuraiton: 300
enableInternalMsg: false
enableTxnLog: false
namespace(deprecated. Use nf-service instead.): none
nf-service: none
gr-instance: 0
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   337  100   119  100   218  10818  19818 --:--:-- --:--:-- --:--:-- 30636
Command: --header Content-type:application/json --request POST --data {"commandname":"mon_sub","parameters":{"supi":"aabb.0000.0001@automation-userplane","duration":300,"enableTxnLog":false,"enableInternalMsg":false,"action":"start","namespace":"none","nf-service":"none","grInstance":0}} http://oam-pod:8879/commands
Result start mon_sub, fileName ->logs/monsublogs/none.aabb.0000.0001@automation-userplane_TS_2021-06-09T12:17:33.838574118.txt
Starting to tail the monsub messages from file: logs/monsublogs/none.aabb.0000.0001@automation-userplane_TS_2021-06-09T12:17:33.838574118.txt
Defaulting container name to oam-pod.
Use 'kubectl describe pod/oam-pod-0 -n bng' to see all of the containers in this pod.
      Subscriber Id: aabb.0000.0001@automation-userplane
      Timestamp: 2021/06/09 12:19:30.194843
      Message: BNGN4UdpProxyMessage
      Description: Received Packet IPOE, IPC Message from udp-proxy
      Source: bng.udp-proxy.DC.Local.0
      Destination: bng.bng-n4-protocol.DC.Local.0
      PAYLOAD:
        BNGN4UdpProxyMessage:
            BNGN4UdpProxyMessage:
                Type: 6
                L2Data:
                    SrcMac: aabb.0000.0001
                    DstMac: ffff.ffff.ffff
                    Outervlan: 100
                    Innervlan: 200
                    OuterCos: 0
                    InnerCos: 0
                IpAddr:
                    AfType: 1
                    SrcIpv4:
                    SrcIpv6:
                    DstIPv4: 8.8.8.8
                    DstIPv6:
                    LinkLocal:
                    Port: 8000
                UpData:
                    AccessInterface: GigabitEthernet0/0/0/1
                    CpSubscriberId: 0
                    UpSubscriberId: 0
                    UPSubInterfaceId: 0
                    RouterName: automation-userplane
                    AccessVrf: access-vrf-1
                    NASID: NAS-ID-1
                NasInfo:
                    Port: 4
                    Slot: 2
                    Adapter: 5
                    Subslot: 3
                    Chasis: 1
                    InterfaceType: 1
                L2TPData:
                    PuntPoliceRate: 0
                    L2TPTos: 0
                    TunnelID: 0
                Packet:
                    Payload:
                        BaseLayer:
                        Operation: 1
                        HardwareType: 1
                        HardwareLen: 6
                        HardwareOpts: 0
                        Xid: 1
                        Secs: 0
                        Flags: 32768
                        ClientIP: 0.0.0.0
                        YourClientIP: 0.0.0.0
                        NextServerIP: 0.0.0.0
                        RelayAgentIP: 0.0.0.0
                        ClientHWAddr: aa:bb:00:00:00:01
                        ServerName:
                        File:
                        Options: {
		Option(MessageType:Discover)
		Option(ClientID:[1 170 187 0 0 0 1])
}

--------------------------------------------------

      Subscriber Id: aabb.0000.0001@automation-userplane
      Timestamp: 2021/06/09 12:19:30.205174
      Message: RadiusUdpProxyMsg
      Description: Send Auth/Acct Request Message to UDP-Proxy
      Source: bng.radius-ep.DC.Local.0
      Destination: bng.udp-proxy.DC.Local.0
      PAYLOAD:
        RadiusUdpProxyMsg:
            RadiusUdpProxyMsg:
                SrcIp: 10.105.254.113
                SrcPort: 16384
                DestIp: 10.105.254.114
                DestPort: 1812
                Payload:
			Code = AccessRequest
			Id = 2
			Authenticator = [148 88 241 197 50 83 83 156 105 245 107 167 117 131 237 165]
			User-Name = "cnbng"
			User-Password = 0x30b19d11f96401290b6410e8a1b324eb
			NAS-IP-Address = 10.105.254.113
			NAS-Port = 16384
			Service-Type = 5
			Called-Station-Id = "1"
			Calling-Station-Id = "1"
			Nas-Identifier = "bng"
			Acct-Session-Id = "Local_DC_16777218"
			Event-Timestamp = 1623241161
			NAS-Port-Type = 41
			NAS-Port-Id = "124536"
			NAS-IPv6-Address = ::/0
			Cisco-Vsa_cisco-nas-port = "124536"
			Cisco-Vsa_cisco-dhcp-client-id = 0x01aabb00000001
			Cisco-Vsa_Cisco AVpair = "client-mac-address=aabb.0000.0001"
			Cisco-Vsa_Cisco AVpair = 0x646863702d636c69656e742d69643d01aabb00000001
                PayloadLen: 231
                SubscriberID: aabb.0000.0001@automation-userplane

--------------------------------------------------

      Subscriber Id: aabb.0000.0001@automation-userplane
      Timestamp: 2021/06/09 12:19:30.206778
      Message: RadiusUdpProxyMsg
      Description: Received Auth/Acct Response Message from UDP-Proxy
      Source: bng.udp-proxy.DC.Local.0
      Destination: bng.radius-ep.DC.Local.0
      PAYLOAD:
        RadiusUdpProxyMsg:
            RadiusUdpProxyMsg:
                SrcIp: 10.105.254.114
                SrcPort: 1812
                DestIp: 10.105.254.113
                DestPort: 16384
                Payload:
			Code = AccessAccept
			Id = 2
			Authenticator = [127 214 195 68 205 142 58 23 126 138 11 70 241 169 153 92]
                PayloadLen: 20

--------------------------------------------------

      Subscriber Id: aabb.0000.0001@automation-userplane
      Timestamp: 2021/06/09 12:19:30.216130
      Message: DHCPPacketTx
      Description: Sending Packet IPOE, IPC Message to udp-proxy
      Source: bng.bng-n4-protocol.DC.Local.0
      Destination: bng.udp-proxy.DC.Local.0
      PAYLOAD:
        DHCPPacketTx:
            DHCPPacketTx:
                Type: 6
                L2Data:
                    DstMac: ff:ff:ff:ff:ff:ff
                    Outervlan: 100
                    Innervlan: 200
                    OuterCos: 0
                    InnerCos: 0
                IpAddr:
                    AfType: 1
                    SrcIpv4: 33.0.0.1
                    SrcIpv6:
                    DstIPv4: 255.255.255.255
                    DstIPv6:
                    LinkLocal:
                    Port: 68
                UpData:
                    AccessInterface: GigabitEthernet0/0/0/1
                    CpSubscriberId: 16777218
                    UpSubscriberId: 0
                    UPSubInterfaceId: 0
                    RouterName: automation-userplane
                    AccessVrf: access-vrf-1
                    NASID: NAS-ID-1
                Packet:
                    Payload:
                        BaseLayer:
                        Operation: 2
                        HardwareType: 1
                        HardwareLen: 6
                        HardwareOpts: 0
                        Xid: 1
                        Secs: 0
                        Flags: 32768
                        ClientIP: 0.0.0.0
                        YourClientIP: 33.0.0.3
                        NextServerIP: 0.0.0.0
                        RelayAgentIP: 0.0.0.0
                        ClientHWAddr: aa:bb:00:00:00:01
                        ServerName:
                        File:
                        Options: {
		Option(MessageType:Offer)
		Option(ClientID:[1 170 187 0 0 0 1])
		Option(SubnetMask:255.255.224.0)
		Option(LeaseTime:90060)
		Option(Timer1:45030)
		Option(Timer2:78802)
		Option(ServerID:33.0.0.1)
}

--------------------------------------------------

      Subscriber Id: aabb.0000.0001@automation-userplane
      Timestamp: 2021/06/09 12:19:30.293167
      Message: BNGN4UdpProxyMessage
      Description: Received Packet IPOE, IPC Message from udp-proxy
      Source: bng.udp-proxy.DC.Local.0
      Destination: bng.bng-n4-protocol.DC.Local.0
      PAYLOAD:
        BNGN4UdpProxyMessage:
            BNGN4UdpProxyMessage:
                Type: 6
                L2Data:
                    SrcMac: aabb.0000.0001
                    DstMac: ffff.ffff.ffff
                    Outervlan: 100
                    Innervlan: 200
                    OuterCos: 0
                    InnerCos: 0
                IpAddr:
                    AfType: 1
                    SrcIpv4:
                    SrcIpv6:
                    DstIPv4: 8.8.8.8
                    DstIPv6:
                    LinkLocal:
                    Port: 8000
                UpData:
                    AccessInterface: GigabitEthernet0/0/0/1
                    CpSubscriberId: 0
                    UpSubscriberId: 0
                    UPSubInterfaceId: 0
                    RouterName: automation-userplane
                    AccessVrf: access-vrf-1
                    NASID: NAS-ID-1
                NasInfo:
                    Port: 4
                    Slot: 2
                    Adapter: 5
                    Subslot: 3
                    Chasis: 1
                    InterfaceType: 1
                L2TPData:
                    PuntPoliceRate: 0
                    L2TPTos: 0
                    TunnelID: 0
                Packet:
                    Payload:
                        BaseLayer:
                        Operation: 1
                        HardwareType: 1
                        HardwareLen: 6
                        HardwareOpts: 0
                        Xid: 1
                        Secs: 0
                        Flags: 32768
                        ClientIP: 0.0.0.0
                        YourClientIP: 0.0.0.0
                        NextServerIP: 0.0.0.0
                        RelayAgentIP: 0.0.0.0
                        ClientHWAddr: aa:bb:00:00:00:01
                        ServerName:
                        File:
                        Options: {
		Option(MessageType:Request)
		Option(ClientID:[1 170 187 0 0 0 1])
		Option(ServerID:33.0.0.1)
		Option(RequestIP:33.0.0.3)
}

--------------------------------------------------

      Subscriber Id: aabb.0000.0001@automation-userplane
      Timestamp: 2021/06/09 12:19:30.301343
      Message: BNGN4SessionEstablishmentReq
      Description: Sending N4 Session Establishment Request, IPC Message to udp-proxy
      Source: bng.bng-n4-protocol.DC.Local.0
      Destination: bng.udp-proxy.DC.Local.0
      PAYLOAD:
        BNGN4SessionEstablishmentReq:
            BNGN4SessionEstablishmentReq:
                PfcpSessionHeader:
                    Version: 1
                    SeidSet: true
                    MessageType: 50
                    MessageLen: 413
                    SequenceNumber: 5
                    Seid: 0
                    Priority: 1
                NodeID:
                    Valid: true
                    Ip: Afi=v4 Ip=10.105.254.113
                Fseid:
                    Valid: true
                    Seid: 16777218
                    Ipv4: 0.0.0.0
                    Ipv6:
                CreatePdrList:
                    CreatePdrList[0]:
                        Valid: true
                        PdrId:
                            Valid: true
                            RuleId: 1
                        Precedence:
                            Valid: true
                            Val: 1
                        Pdi:
                            Valid: true
                            SrcIface:
                                Valid: true
                                Value: 1
                            TrafficEndptId:
                                Valid: true
                                Val: 1
                        FarId:
                            Valid: true
                            Val: 1
                        OuterHeaderRemoval:
                            Valid: false
                            Description: 0
                        UrrId:
                            Valid: true
                            Val: 1
                    CreatePdrList[1]:
                        Valid: true
                        PdrId:
                            Valid: true
                            RuleId: 2
                        Precedence:
                            Valid: true
                            Val: 1
                        Pdi:
                            Valid: true
                            SrcIface:
                                Valid: true
                                Value: 2
                            TrafficEndptId:
                                Valid: false
                                Val: 0
                        FarId:
                            Valid: true
                            Val: 2
                        OuterHeaderRemoval:
                            Valid: false
                            Description: 0
                        UrrId:
                            Valid: false
                            Val: 0
                CreateFarList:
                    CreateFarList[0]:
                        Valid: true
                        FarId:
                            Valid: true
                            Val: 1
                        ApplyAction:
                            Valid: true
                            Drop: false
                            Forward: true
                            Buffer: false
                            NotifyCP: false
                            Duplicate: false
                        ForwParams:
                            Valid: true
                            DestIface:
                                Valid: true
                                Value: 2
                            OuterHeaderCreation:
                                Valid: true
                                CprNSH: false
                                TfEndpt: true
                                L2tp: false
                                Ppp: false
                                TunnelID: 0
                                SessionID: 0
                        DuplParams:
                            Valid: false
                            DestIface:
                                Valid: false
                                Value: 0
                            OuterHeaderCreation:
                                Valid: false
                                Teid: 0
                                Ipv4:
                                Ipv6:
                                PortNum: 0
                            IntrInfo:
                                Valid: false
                                InterceptId:
                                    Valid: false
                                Dscp:
                                    Valid: false
                                    Dscp: 0
                    CreateFarList[1]:
                        Valid: true
                        FarId:
                            Valid: true
                            Val: 2
                        ApplyAction:
                            Valid: true
                            Drop: false
                            Forward: true
                            Buffer: false
                            NotifyCP: false
                            Duplicate: false
                        ForwParams:
                            Valid: true
                            DestIface:
                                Valid: true
                                Value: 1
                            OuterHeaderCreation:
                                Valid: true
                                CprNSH: false
                                TfEndpt: true
                                L2tp: false
                                Ppp: false
                                TunnelID: 0
                                SessionID: 0
                        DuplParams:
                            Valid: false
                            DestIface:
                                Valid: false
                                Value: 0
                            OuterHeaderCreation:
                                Valid: false
                                Teid: 0
                                Ipv4:
                                Ipv6:
                                PortNum: 0
                            IntrInfo:
                                Valid: false
                                InterceptId:
                                    Valid: false
                                Dscp:
                                    Valid: false
                                    Dscp: 0
                CreateTrafficEndptList:
                    CreateTrafficEndptList[0]:
                        Valid: true
                        Tfid:
                            Valid: true
                            Val: 1
                        AccessPortId:
                            Valid: true
                            Value: GigabitEthernet0/0/0/1
                        UeIPAddr:
                            Valid: true
                            Flags: 2
                            Ipv4Addr: Afi=v4 Ip=33.0.0.3
                            Ipv6Addr:
                            IPv6PrefixLen: 0
                            Ipv6PDAddr:
                            Ipv6LLAddr:
                        UeMacAddress: aa:bb:00:00:00:01
                        PppoeSessId:
                            Valid: false
                            Value: 0
                        AddressFamily:
                            Valid: true
                            Value: 3
                        Cvlan:
                            Valid: true
                            Pcp: 0
                            Dei: 0
                            VlanId: 200
                        Svaln:
                            Valid: true
                            Pcp: 0
                            Dei: 0
                            VlanId: 100
                        L2tpTunnel:
                            Valid: false
                            TunnelEndpoint:
                                Valid: false
                                Choose: false
                                LocalID: 0
                                RemoteID: 0
                            SessionID:
                                Valid: false
                                SessionID: 0
                                RemoteSessionID: 0
                            TunnelFeatures:
                                Valid: false
                                SetTOS: false
                                ReflectTOS: false
                                SetDF: false
                                ReflectDF: false
                                TcpMssAdjust: false
                                TunnelStatsEnabled: false
                                SessStatsEnabled: false
                                TSI: false
                                SSI: false
                                TosVal: 0
                                TcpMssVal: 0
                                TunnelStatsInterval: 0
                                SessStatsInterval: 0
                SubParams:
                    Valid: true
                    Stype:
                        Valid: true
                        Value: 1
                    SrgIntfId:
                        Valid: false
                        Value: 0
                    SrgGrpId:
                        Valid: false
                        Value: 0
                    Vrf:
                        Valid: true
                        Value: automation-vrf
                    AccessVrf:
                        Valid: false
                CreateURR:
                    CreateURR[0]:
                        Valid: true
                        UrrID:
                            Valid: true
                            Val: 1
                        MeasurementMethod:
                            Valid: true
                            Event: false
                            Volume: true
                            Duration: false
                        Trigger:
                            Valid: true
                            PeriodicReporting: true
                            VolumeThreshold: false
                            TimeThreshold: false
                            QuotaHoldingTime: false
                            StartOfTraffic: false
                            StopOfTraffic: false
                            DroppedDlTrafficThreshold: false
                            ImmediateReport: false
                            VolumeQuota: false
                            TimeQuota: false
                            LinkedUsageReporting: false
                            TerminationReport: true
                            MonitoringTime: false
                            EnvelopeClosure: false
                            MacAddressReporting: false
                            EventThreshold: false
                            EventQuota: false
                            TerminationByUP: false
                        MeasurementPeriod:
                            Valid: true
                            Val: 1940
                Keepalive:
                    Valid: false
                    Tfid:
                        Valid: false
                        Val: 0
                    Timer:
                        Valid: false
                        TimeInterval: 0
                        RetryCount: 0
                    MagicNum:
                        Valid: false
                        LocalMagicNum: 0
                        PeerMagicNum: 0
                CreateQspList:
                    CreateQspList[0]:
                        Valid: true
                        Service:
                            Valid: true
                            Length: 0
                            Value: automation-feature-template-accounting
                        QosIngress:
                            Valid: true
                            Length: 0
                            Name: inpolicy
                            Priority: 0
                        QosEgress:
                            Valid: true
                            Length: 0
                            Name: outpolicy
                            Priority: 0
                        Stats:
                            Valid: true
                            Value: true
                        Spi:
                            Valid: false
                            Value: 0
                        PlainQos: false
                CreateACL:
                    Valid: false
                    Ipv4InACL:
                        Valid: false
                    Ipv4OutACL:
                        Valid: false
                    Ipv6InACL:
                        Valid: false
                    Ipv6OutACL:
                        Valid: false
                CreatePBR:
                    Valid: false
                    PbrIngress:
                        Valid: false
                        Length: 0
                CreateuRPF:
                    Valid: false
                    Strictv4: false
                    Strictv6: false
                    Loosev4: false
                    Loosev6: false
                CreateICMP:
                    Valid: false
                    V4: false
                    V6: false
                RemoveICMP:
                    Valid: false
                    V4: false
                    V6: false
                CreateMTU:
                    Valid: true
                    V4Mtu: 1400
                    V6Mtu: 0
                    PPPMtu: 0
                TransactionIdentifier:
                    Valid: true
                    Value: 1
-------------------------------------------------- 

Use the following commands to enable protocol monitoring for a subscriber.

monitor protocol interface pcap_interface capture-duration duration_in_seconds  

NOTES:

• interface pcap_interface : Specifies the packet capture (PCAP) interface. The valid PCAP interfaces are: Packet Forwarding Control Protocol (PFCP), GPRS Tunnelling Protocol User Plane (GTP-U), and Remote Authentication Dial-In User Service (RADIUS).

• capture-duration duration_in_seconds : Specifies the duration in seconds during which the monitor protocol is enabled. The duration_in_seconds can range from 1 to 2147483647 seconds. The default is 300.

• cnBNG uses a custom GTPU packet format. Therefore, packet decode errors are displayed on the screen because the standard decode plugin does not support the cnBNG format. Capture the packet to PCAP and use the cnBNG specific LUA plugin during Wireshark decode.

• Interface names must be entered manually and must match the name mentioned in the description, else the packet capture may fail.

• Only one physical-interface (NIC) packet capture is supported. For PFCP and GTPU this limitation is not applicable as they always run-on a single interface (VIP). However for RADIUS, certain deployments may use different VIPs for Auth/Acct/COA, leading to different physical NICs. Due to the infrastructure limitation, packet-capture can run on only one of the physical-NICs.

Example

monitor protocol interface pfcp

InterfaceName = N4:10.86.73.161:8805 |  InterfaceIP = 10.86.73.161 | Filter = (tcp or udp) and (port 8805)
<<<<OUTBOUND
from 10.86.73.161:8805 to 10.86.73.162:8805
Protocol: UDP | Sequence Number: 0
Packet Metadata: {Timestamp:2019-10-22 09:22:34.029363 +0000 UTC CaptureLength:72 Length:72 InterfaceIndex:2 AncillaryData:[]}

Packet Raw Bytes:
 0050569c14610050569c8d5c08004500003a76c5400040111bff0a5649a10a5649a2226522650026a8262006001a00000004003c0005000a5649a1001300010100600004e159480e

Packet Dump:
 -- FULL PACKET DATA (72 bytes) ------------------------------------
00000000  00 50 56 9c 14 61 00 50  56 9c 8d 5c 08 00 45 00  
00000010  00 3a 76 c5 40 00 40 11  1b ff 0a 56 49 a1 0a 56  
00000020  49 a2 22 65 22 65 00 26  a8 26 20 06 00 1a 00 00  
00000030  00 04 00 3c 00 05 00 0a  56 49 a1 00 13 00 01 01 
00000040  00 60 00 04 e1 59 48 0e  
--- Layer 1 ---
Ethernet	{Contents=[..14..] Payload=[..58..] SrcMAC=00:50:56:9c:8d:5c DstMAC=00:50:56:9c:14:61 EthernetType=IPv4 Length=0}
00000000  00 50 56 9c 14 61 00 50  56 9c 8d 5c 08 00  
--- Layer 2 ---
IPv4	{Contents=[..20..] Payload=[..38..] Version=4 IHL=5 TOS=0 Length=58 Id=30405 Flags=DF FragOffset=0 TTL=64 Protocol=UDP Checksum=7167 SrcIP=10.86.73.161 DstIP=10.86.73.162 Options=[] Padding=[]}
00000000  45 00 00 3a 76 c5 40 00  40 11 1b ff 0a 56 49 a1  
00000010  0a 56 49 a2 
--- Layer 3 ---
UDP	{Contents=[..8..] Payload=[..30..] SrcPort=8805(pfcp) DstPort=8805(pfcp) Length=38 Checksum=43046}
00000000  22 65 22 65 00 26 a8 26                           |"e"e.&.&|
--- Layer 4 ---
Payload	30 byte(s)
00000000  20 06 00 1a 00 00 00 04  00 3c 00 05 00 0a 56 49  
00000010  a1 00 13 00 01 01 00 60  00 04 e1 59 48 0e     

Use the following commands to copy the stored log files externally or on the BNG Ops Center.

These files ether can be copied outside or dumped on the bng-opscenter using the following CLI command.

monitor subscriber-dump filename <file path got from monitor subscriber-list CLI> 

Example:

monitor subscriber dump filename /opt/workspace/logs/monsublogs/none.aabb.0000.0001@automation-userplane_TS_2021-06-09T12:17:33.838574118.txt.sorted
RELEASE_NAMESPACE: 'bng'
Dumping file '/opt/workspace/logs/monsublogs/none.aabb.0000.0001@automation-userplane_TS_2021-06-09T12:17:33.838574118.txt.sorted'
**** Received 19 messages ******
      Subscriber Id: aabb.0000.0001@automation-userplane
      Timestamp: 2021/06/09 12:19:30.194843
      Message: BNGN4UdpProxyMessage
      Description: Received Packet IPOE, IPC Message from udp-proxy
      Source: bng.udp-proxy.DC.Local.0
      Destination: bng.bng-n4-protocol.DC.Local.0
      PAYLOAD:
        BNGN4UdpProxyMessage:
            BNGN4UdpProxyMessage:
                Type: 6
                L2Data:
                    SrcMac: aabb.0000.0001
                    DstMac: ffff.ffff.ffff
                    Outervlan: 100
                    Innervlan: 200
                    OuterCos: 0
                    InnerCos: 0
                IpAddr:
                    AfType: 1
                    SrcIpv4:
                    SrcIpv6:
                    DstIPv4: 8.8.8.8
                    DstIPv6:
                    LinkLocal:
                    Port: 8000
                UpData:
                    AccessInterface: GigabitEthernet0/0/0/1
                    CpSubscriberId: 0
                    UpSubscriberId: 0
                    UPSubInterfaceId: 0
                    RouterName: automation-userplane
                    AccessVrf: access-vrf-1
                    NASID: NAS-ID-1
                NasInfo:
                    Port: 4
                    Slot: 2
                    Adapter: 5
                    Subslot: 3
                    Chasis: 1
                    InterfaceType: 1
                L2TPData:
                    PuntPoliceRate: 0
                    L2TPTos: 0
                    TunnelID: 0
                Packet:
                    Payload:
                        BaseLayer:
                        Operation: 1
                        HardwareType: 1
                        HardwareLen: 6
                        HardwareOpts: 0
                        Xid: 1
                        Secs: 0
                        Flags: 32768
                        ClientIP: 0.0.0.0
                        YourClientIP: 0.0.0.0
                        NextServerIP: 0.0.0.0
                        RelayAgentIP: 0.0.0.0
                        ClientHWAddr: aa:bb:00:00:00:01
                        ServerName:
                        File:
                        Options: {
                                Option(MessageType:Discover)
                                Option(ClientID:[1 170 187 0 0 0 1]).
 
.


--------------------------------------------------
 
      Subscriber Id: aabb.0000.0001@automation-userplane
      Timestamp: 2021/06/09 12:19:30.205174
      Message: RadiusUdpProxyMsg
      Description: Send Auth/Acct Request Message to UDP-Proxy
      Source: bng.radius-ep.DC.Local.0
      Destination: bng.udp-proxy.DC.Local.0
      PAYLOAD:
        RadiusUdpProxyMsg:
            RadiusUdpProxyMsg:
                SrcIp: 10.105.254.113
                SrcPort: 16384
                DestIp: 10.105.254.114
                DestPort: 1812
                Payload:

 
--------------------------------------------------
 
      Subscriber Id: aa11.0000.0003@asr9k-1
      Timestamp: 2021/06/03 06:26:26.796023
      Message: RadiusUdpProxyMsg
      Description: Send Auth/Acct Request Message to UDP-Proxy
      Source: BNG.radius-ep.DC.Local.0
      Destination: BNG.udp-proxy.DC.Local.0
      PAYLOAD:
        RadiusUdpProxyMsg:
            RadiusUdpProxyMsg:
                SrcIp: 10.1.4.150
                SrcPort: 16384
                DestIp: 10.1.4.151
                DestPort: 1813
                Payload:
                        Code = AccountingRequest
                        Id = 31
                        Authenticator = [88 13 251 114 225 205 9 68 52 194 48 231 234 226 226 184]
                        User-Name = "cnbng"
                        NAS-IP-Address = 10.1.4.150
                        NAS-Port = 16384
                        Service-Type = 5
                        Framed-IP-Address = 1.0.3.13
                        Nas-Identifier = "CISCO-BNG-ACCT"
                        Acct-Status-Type = 1
                        Acct-Delay-Time = 0
                        Acct-Session-Id = "Local_DC_16777230"
                        Event-Timestamp = 1622701602
                        NAS-Port-Type = 41
                        Acct-Interim-Interval = 300
                        NAS-Port-Id = "asr9k-1/2/3/4/100.200"
                        NAS-IPv6-Address = ::/0
                        Cisco-Vsa_cisco-nas-port = "asr9k-1/2/3/4/100.200"
                        Cisco-Vsa_cisco-dhcp-client-id = 0x01aa1100000003
                        Cisco-Vsa_Cisco AVpair = "client-mac-address=aa11.0000.0003"
                        Cisco-Vsa_Cisco AVpair = "dhcp-class=RJIL_DHCPV4_CLASS_2"
                        Cisco-Vsa_Cisco AVpair = "dhcp-class=RJIL_DHCPv6_CLASS_1"
                        Cisco-Vsa_Cisco AVpair = "accounting-list=aaa-prof1"
                        Cisco-Vsa_Cisco AVpair = 0x646863702d636c69656e742d69643d01aa1100000003
                        Cisco-Vsa_Cisco AVpair = "vrf=ISP"
                PayloadLen: 396
                SubscriberID: aa11.0000.0003@asr9k-1
 
--------------------------------------------------
 
      Subscriber Id: aa11.0000.0003@asr9k-1
      Timestamp: 2021/06/03 06:26:26.800776
      Message: RadiusUdpProxyMsg
      Description: Received Auth/Acct Response Message from UDP-Proxy
      Source: BNG.udp-proxy.DC.Local.0
      Destination: BNG.radius-ep.DC.Local.0
      PAYLOAD:
        RadiusUdpProxyMsg:
            RadiusUdpProxyMsg:
                SrcIp: 10.1.4.151
                SrcPort: 1813
                DestIp: 10.1.4.150
                DestPort: 16384
                Payload:
                        Code = AccountingResponse
                        Id = 31
                        Authenticator = [168 192 147 70 117 31 151 16 237 80 68 105 42 191 23 186]
                PayloadLen: 20
 
-------------------------------------------------
 bng# 

Note

While receiving CoA or DM packets, the RADIUS pod does not have the subscriber-information, instead the information is available only with the BNG-SM pod. Therefore, the packet related session programming N4-SESS-UPDATE TX and RX is dumped on the screen first followed by the CoA or DM TX and RX dump. Packet dumps are not captured for PFCP session report request and response.

Use the following commands to view the stored log files for a monitor protocol or subscriber.

monitor subscriber list 
monitor protocol list 

The following is a sample output for the monitor subscriber list.

Example:

bng# monitor subscriber list
none.aa11.0000.0004*_TS_2021-06-03T06:28:13.564009704.txt.sorted
none.aa11.0000.0003@asr9k-1_TS_2021-06-03T06:26:20.627655233.txt.sorted
none.*_TS_2021-06-03T06:25:04.176857711.txt.sorted
bng#