Cisco 1240 Connected Grid Router Hardware Installation Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 15, 2014

Unpacking the Router

This section includes instructions about how to unpack the Cisco 1240 Connected Grid Router and describes the items that ship with the router.

These topics are discussed:

■Unpacking the Router

■Router Package Contents

Unpacking the Router

Tip: When you unpack the router, do not remove the foam blocks attached to antennas and antenna connectors. The foam protects the antennas and connectors during installation.

To unpack the router:

1. Open the shipping container and carefully remove the contents.

2. Return all packing material to the shipping container, and save it.

3. Ensure that all items listed in the Router Package Contents are included in the shipment. If any item is damaged or missing, notify your authorized Cisco sales representative.

Router Package Contents

Your router kit contains the items listed in Table 1.

Note: Some items are optional and might not be included with the router if they were not ordered with the router.

Table 1 Cisco 1240 Connected Grid Router Package Contents
Qty.	Item	Description
1	Cisco CGR 1240	Router enclosure, with the following components installed: ■Connected Grid Modules (1 to 4, depending on configuration ordered) ■GPS Antenna ■WiFi Antenna ■Connected Grid Module Antennas (1 to 7, depending on configuration ordered) ■2-GB SD Flash Memory Module ■AC Power Supply (Power cable part number CGR-PWRCORD-NA or CGR-PWRCORD-EU must be ordered separately). ■Battery Backup Units (0 to 3, depending on configuration ordered)
1	Console cable	RJ-45-to-DB-9
1	Grounding kit	Grounding lug and two screws. See Grounding Hardware.
1	Cable glands kit	Includes: ■One cable gland (more can be ordered, see table 10) ■One tube of anti-seize compound
1	Mounting bracket kit	Includes: ■Mounting bracket ■Mounting bracket security panel ■Required hardware For details, see Mounting Bracket Kit.
Optional Items (Ordered Separately)
1	Pole mount kit	Includes: ■Mounting plate ■Two clamp brackets ■Required hardware See Pole Mount Kit.
1	Band strap kit	Two steel straps. See Band Strap Kit.
1	Strap tool kit	BAND-IT strap tool. See Strap Tool Kit.
1	Antenna plug	CGR-ANT-PLUG

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)