- Feature History
- Using Cisco IOS XE Software
- Console Port Telnet and SSH Handling
- Configuring Clocking and Timing
- Using the Management Ethernet Interface
- Configuring Ethernet Interfaces
- Configuring T1/E1 Interfaces
- Dying Gasp Support for Loss of Power Supply via SNMP, Syslog and Ethernet OAM
- Configuring the Global Navigation Satellite System
- G.8275.1 Telecom Profile
- Tracing and Trace Management
- OTN Wrapper Overview
- Using Zero Touch Provisioning
- Configuring 8/16-port 1 Gigabit Ethernet (SFP / SFP) + 1-port 10 Gigabit Ethernet (SFP+) / 2-port 1 Gigabit Ethernet (CSFP) Interface Module
Feature History
The following table lists the new and modified features supported in the Cisco NCS 4200 Series Software Configuration Guide in Cisco IOS XE 16 releases, on Cisco NCS 4201 and Cisco NCS 4202 routers.
Feature Name |
Cisco IOS XE Release |
---|---|
Video Template - IPv4 QoS classifications |
16.11.1a |
PTP Asymmetry Readjustment |
|
Zero Touch Provisioning |
|
SNMP Dying Gasp Support |
16.9.4 |
RS232 Sync |
16.9.1a |
1 PPS Pulse Width Configuration |
16.6.1 |
Alarm support for 900W |
|
Unframed E1 for BCP over MLPPP |
16.5.1 |
G.8275.2 Telecom Profile |
The following table lists the new and modified features supported in the Cisco NCS 4200 Series Software Configuration Guide in Cisco IOS XE 16 releases, on Cisco NCS 4206 and Cisco NCS 4216 routers.
Feature Name |
Cisco IOS XE Release |
---|---|
Video Template - IPv4 QoS classifications |
16.11.1a |
PTP Asymmetry Readjustment |
|
Zero Touch Provisioning |
|
SDM template enhancement for uRPF scale |
16.9.4 |
Dying GASP via SNMP trap |
16.9.1a |
RS232 Sync |
|
Over Subscription Mode and Partial Port Mode Support on 8-port 10 Gigabit Ethernet Interface Module on NCS 4216 Chassis |
|
Card Protection for 48-port T1/E1 CEM Interface Module and 48-port T3/E3 CEM Interface Module |
16.6.1 |
DS1 and DS3 Card Protection |
|
1 PPS Pulse Width Configuration |
|
G.8275.2 Telecom Profile |
16.5.1 |
OTN Wrapper |