Quality of Service Configuration Guidelines, Cisco IOS XE 16 (Cisco NCS 4200 Series)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 7, 2020

Chapter: Feature History

Feature History

Feature History

The following table lists the new and modified features that are supported in the Quality of Service Configuration Guidelines in Cisco IOS XE 16 releases, on Cisco NCS 4201 and Cisco NCS 4202 routers.


Feature Name	Cisco IOS XE Release
CoS Marking for Local Traffic	16.11.1
Egress QoS for IPSLA	16.8.1

The following table lists the new and modified features that are supported in the Quality of Service Configuration Guidelines in Cisco IOS XE 16 releases, on Cisco NCS 4206 and Cisco NCS 4216 routers.


Feature Name	Cisco IOS XE Release
MPLS Layer 3 VPN Conditional Marking	16.12.1
QoS Short-pipe Mode	16.12.1
CoS Marking for Local Traffic on the RSP2 Module	16.11.1
Global Table Map	16.11.1
16K EFP Support on Port Channel	16.8.1
16K EFP QoS Support	16.6.1
IPv6 QoS	16.5.1
Table Map MDT Index Optimization	16.5.1

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)