The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The following table lists the new and modified features that are supported in the QoS: Policing and Shaping Configuration Guide in Cisco IOS XE 17 releases, on Cisco NCS 4201 and Cisco NCS 4202 routers.
Feature | Description |
---|---|
Cisco IOS XE Bengaluru 17.5.1 |
|
This feature supports Ingress on In-band Management Loopback interface and Ingress on Data plane interface to block traffic using MPLS. Both, Source IP and Destination IP based filtering are supported on NCS 4206 and NCS 4216; however, only Source IP based filtering is supported on the NCS 4201 and NCS 4202 routers. |
The following table lists the new and modified features that are supported in the QoS: Policing and Shaping Configuration Guide in Cisco IOS XE 17 releases, on Cisco NCS 4206 and Cisco NCS 4216 routers.
Feature | Description |
---|---|
Cisco IOS XE Bengaluru 17.5.1 |
|
This feature supports Ingress on In-band Management Loopback interface and Ingress on Data plane interface to block traffic using MPLS. CoPP ACL also enables you to configure the 830 and 5432 ports on the Cisco router. This is only applicable to NCS 4206 and NCS 4216 routers. Both, Source IP and Destination IP based filtering are supported on NCS 4206 and NCS 4216; however, only Source IP based filtering is supported on the NCS 4201 and NCS 4202 routers. |