- Feature History
- Getting Started With the Cisco NCS 520 Series Router
- Using Cisco IOS XE Software
- Using Zero Touch Provisioning
- Console Port and Telnet Handling
- Using the Management Ethernet Interface
- Installing and Upgrading Software
- Configuring Ethernet Interfaces
- Dying Gasp Support for Loss of Power Supply Through SNMP, Syslog and Ethernet OAM
- Configuring and Monitoring Alarm
- Tracing and Trace Management
Feature History
The following table lists the new and modified features that are supported in the Cisco NCS 520 Series Router Configuration Guide in Cisco IOS XE 16 releases.
Feature Name |
Cisco IOS XE Release |
---|---|
HSRP/VRRP Support |
16.12.1 |
IGMP Snooping |
16.12.1 |
PVST+/RPVST+ |
16.12.1 |
Resilient Ethernet Protocol |
16.11.1 |
Y.1564 Support |
16.11.1 |
TWAMP Responder |
16.11.1 |
IPv4 Routing |
16.10.1 |
Switch Port Analyzer |
16.10.1 |
YANG Data Models |
16.10.1 |
Support for Flex Links |
16.9.1 |