Compatibility Matrix for Cisco SD-WAN Release 20.1.x

Table 1. Compatibility Matrix for Cisco SD-WAN Release 20.1.x

Controllers

ISR1000/ISR4000/ASR1000

CSR1000v

ISRv (ENCS/CSP)

vEdge

ISR 1100-4G and ISR 1100-6G

ISR1100 - 4GLTENA, ISR1100 - 4GLTEGB

20.1.1

17.2.1r, 16.12.x, 16.10.x, and 16.9.x

17.2.1r and 16.12.x

17.2.1r with NFVIS 4.1.2 FC2

18.3, 18.4, 19.2, and 20.1

20.1.1 & lower up to 19.2.099

20.1.1 & lower up to 19.2.1

20.1.1.1

17.2.1r, 16.12.x, 16.10.x, and 16.9.x

17.2.1v, 17.2.1r, and 16.12.x

17.2.1r with NFVIS 4.1.2.FC2

18.3, 18.4, 19.2, 20.1, and 20.1.1.1

20.1.1.1 & lower up to 19.2.099

20.1.1.1 & lower up to 19.2.1

20.1.12

17.2.1v, 17.2.1r, 16.12.x, 16.10.x, and 16.9.x

17.2.1v, 17.2.1r, and 16.12.x

17.2.1r with NFVIS 4.1.2 FC2

18.3, 18.4, 19.2, 20.1, 20.1.12

20.1.12 & lower up to 19.2.099

20.1.12 & lower up to 19.2.1

20.1.2

17.2.2, 17.2.1v, 17.2.1r, 16.12.x, 16.10.x, and 16.9.x

17.2.2, 17.2.1v, 17.2.1r, and 16.12.x

17.2.1r with NFVIS 4.1.2.FC2

18.3, 18.4, 19.2, 20.1, 20.1.12, and 20.1.2

20.1.2 & lower up to 19.2.099

20.1.2 & lower up to 19.2.1


Note


  • We recommend that the Controller software version matches or be higher than the WAN edge device software version.

  • All device and controller combinations listed in this table have been validated. However, there are no software changes in this controller software release, which impact the device-to-controller backwards compatibility for previous releases that are not listed in the table.

  • UCS-E Series using External Interfaces are supported from Cisco SD-WAN Release 19.2.1 and later releases.

  • UCS-E Series using Internal Backplane Interfaces such as ucse x/y/0 and ucse x/y/1 have a limited feature support configurable using only Cisco SD-WAN Manager CLI templates, starting from Cisco SD-WAN Release 20.1.1 and later releases.

  • The Cisco vEdge 100M, Cisco vEdge 100B, Cisco vEdge 100wm and Cisco vEdge 1000 devices are impacted by a certificate expiry incident. If your Cisco vEdge devices are running Cisco SD-WAN Releases 19.2.x or older releases, or 18.4.x or older releases, upgrade to Cisco SD-WAN Release 20.3.7.1 for a stable user experience. For more information on upgrading to Cisco SD-WAN Release 20.3.7.1 see, Perform the upgrade.