Cisco Cyber Vision Sensor Application for Cisco Switches Installation Guide, Release 4.2.2

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 25, 2023

Requirements

The hardware must have an access set to the Local Manager and to the CLI (ssh or console port).

Elements to collect

The Cisco Cyber Vision Sensor application to collect from Cisco.com, i.e.
- CiscoCyberVision-IOx-aarch64-<version>.tar (Cisco IE3300 10G, Cisco IE3400, Cisco IE9300)
- CiscoCyberVision-IOx-x86-64-<version>.tar (Cisco Catalyst 9300)
- CiscoCyberVision-IOx-Active-Discovery-aarch64-<version>.tar (Cisco IE3300 10G, Cisco IE3400, Cisco IE9300 with Active Discovery)
- CiscoCyberVision-IOx-Active-Discovery-x86-64-<version>.tar (Cisco Catalyst 9300 with Active Discovery)
A console cable, for the connection to the hardware's console port.

OR
An Ethernet cable, for the connection to one of the hardware's port.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)