- Cisco ASA with FirePOWER Services Local Management Configuration Guide
- Introduction to the Cisco ASA FirePOWER Module
- Managing Reusable Objects
- Managing Device Configuration
- Getting Started with Access Control Policies
- Blacklisting Using Security Intelligence IP Address Reputation
- Tuning Traffic Flow Using Access Control Rules
- Controlling Traffic with Network-Based Rules
- Controlling Traffic with Reputation-Based Rules
- Controlling Traffic Based on Users
- Controlling Traffic Using Intrusion and File Policies
- Intelligent Application Bypass
- Understanding Traffic Decryption
- Getting Started with SSL Policies
- Getting Started with SSL Rules
- Tuning Traffic Decryption Using SSL Rules
- Understanding Network Analysis and Intrusion Policies
- Using Layers in a Network Analysis or Intrusion Policy
- Customizing Traffic Preprocessing
- Getting Started with Network Analysis Policies
- Using Application Layer Preprocessors
- Configuring SCADA Preprocessing
- Configuring Transport & Network Layer Preprocessing
- Tuning Preprocessing in Passive Deployments
- Getting Started with Intrusion Policies
- Tuning Intrusion Policies Using Rules
- Detecting Specific Threats
- Globally Limiting Intrusion Event Logging
- Understanding and Writing Intrusion Rules
- Introduction to Identity Data
- Realms and Identity Policies
- User Identity Sources
- DNS Policies
- Blocking Malware and Prohibited Files
- Logging Connections in Network Traffic
- Viewing Events
- Configuring External Alerting
- Configuring External Alerting for Intrusion Rules
- Using the ASA FirePOWER Dashboard
- Using ASA FirePOWER Reporting
- Scheduling Tasks
- Managing System Policies
- Configuring ASA FirePOWER Module Settings
- Licensing the FireSIGHT System ASA FirePOWER Module
- Updating ASA FirePOWER Module Software
- Monitoring the System
- Using Backup and Restore
- Generating Troubleshooting Files
- Importing and Exporting Configurations
- Viewing the Status of Long-Running Tasks
- Security, Internet Access, and Communication Ports
- Access Control License and Role Requirements
- Creating a Basic Access Control Policy
- Managing Access Control Policies
- Editing Access Control Policies
- Understanding Out-of-Date Policy Warnings
- Deploying Configuration Changes
- Troubleshooting Access Control Policies and Rules
- Generating a Report of Current Access Control Settings
- Comparing Access Control Policies
Getting Started with Access Control Policies
An access control policy determines how the system handles traffic on your network. Each ASA FirePOWER module can have one currently applied policy.
The simplest access control policy handles all traffic using its default action . You can set this default action to block or trust all traffic without further inspection, or to inspect traffic for intrusions.
Note that only ASA FirePOWER modules deployed inline can affect the flow of traffic. Applying an access control policy configured to block or alter traffic to passively deployed devices can have unexpected results. In some cases, the system prevents you from applying inline configurations to passively deployed ASA FirePOWER modules.
This chapter explains how to create and apply a simple access control policy. It also contains basic information on managing access control policies: editing, updating, comparing, and so on. For more information, see:
- Access Control License and Role Requirements
- Creating a Basic Access Control Policy
- Managing Access Control Policies
- Editing Access Control Policies
- Understanding Out-of-Date Policy Warnings
- Deploying Configuration Changes
- Troubleshooting Access Control Policies and Rules
- Generating a Report of Current Access Control Settings
- Comparing Access Control Policies
A more complex access control policy can blacklist traffic based on Security Intelligence data, as well as use access control rules to exert granular control over network traffic logging and handling. These rules can be simple or complex, matching and inspecting traffic using multiple criteria. Advanced access control policy options control preprocessing, performance, and other general preferences.
After you create a basic access control policy, see the following chapters for more information on tailoring it to your deployment:
- Blacklisting Using Security Intelligence IP Address Reputation explains how to immediately blacklist (block) connections based on the latest reputation intelligence.
- Understanding Network Analysis and Intrusion Policies explains how network analysis and intrusion policies preprocess and examine packets, as part of the system’s intrusion detection and prevention feature.
- Tuning Traffic Flow Using Access Control Rules explains how access control rules provide a granular method of handling network traffic across multiple ASA FirePOWER modules.
- Controlling Traffic Using Intrusion and File Policies explains how intrusion and file policies provide the last line of defense before traffic is allowed to its destination, by detecting and optionally blocking intrusions, prohibited files, and malware.
Access Control License and Role Requirements
Although you can create access control policies regardless of the licenses on your ASA FirePOWER module, many features require that you enable the appropriate licenses before you apply the policy.
For more information, see License Requirements for Access Control.
License Requirements for Access Control
Although you can create access control policies regardless of the licenses on your ASA FirePOWER module, certain aspects of access control require that you enable specific licensed capabilities before you can apply the policy.
Warning icons and confirmation dialog boxes designate unsupported features for your deployment. For details, see Troubleshooting Access Control Policies and Rules.
The following table explains the license requirements to apply access control policies.
Creating a Basic Access Control Policy
When you create a new access control policy you must give it a unique name and specify a default action. At this point, the default action determines how the ASA FirePOWER modules handles all traffic; you will add other configurations that affect traffic flow later.
When you create a new policy, you can set the default action to block all traffic without further inspection, or to inspect traffic for intrusions, as shown in the following diagram.
Tip When you first create an access control policy, you cannot choose to trust traffic as the default action. If you want to trust all traffic by default, change the default action after you create the policy.
Use the Access Control Policy page ( Policies > Access Control ) to create new and manage existing access control policies.
Optionally, you can use and modify the initial system-provided policy named Default Trust All Traffic.
To create an access control policy:
Step 1 Select Configuration > ASA FirePOWER Configuration > Policies > Access Control Policy .
The Access Control Policy page appears.
Tip You can also copy an existing policy from this ASA FirePOWER module or import a policy from another ASA FirePOWER module. To copy a policy, click the copy icon (
). To import a policy, see Importing and Exporting Configurations.
The New Access Control Policy pop-up window appears.
Step 3 Give the policy a unique Name and, optionally, a Description .
You can use all printable characters, including spaces and special characters, except for the pound sign (
#
), a semi-colon (;), or either brace ({}). The name must include at least one non-space character.
Step 4 Specify the initial Default Action :
For guidance on choosing an initial default action, as well as how to change it later, see Setting Default Handling and Inspection for Network Traffic.
Step 5 Click Store ASA FirePOWER Changes .
The access control policy editor appears. For information on configuring your new policy, see Editing Access Control Policies. Note that you must apply the policy for it to take effect; see Deploying Configuration Changes.
Setting Default Handling and Inspection for Network Traffic
When you create an access control policy, you must select a default action. The default action for an access control policy determines how the system handles traffic that:
- is not blacklisted by Security Intelligence
- matches none of the rules in the policy (except Monitor rules, which match and log—but do not handle or inspect—traffic)
Therefore, when you apply an access control policy that does not contain any access control rules or Security Intelligence configurations, the default action determines how all traffic on your network is handled. You can block or trust all traffic without further inspection, or inspect traffic for intrusions. Your options are shown in the following diagram.
The following table describes how the different default actions handle traffic, and lists the types of inspection you can perform on traffic handled by each default action. Note that you cannot perform file or malware inspection on traffic handled by the default action. For more information, see Controlling Traffic Using Intrusion and File Policies.
The diagram below illustrates the Block All Traffic and Trust All Traffic default actions.
The diagram below illustrates the Intrusion Prevention default actions.
When you first create an access control policy, logging connections that are handled by the default action is disabled by default. If you select a default action that performs intrusion inspection, the system automatically associates the default intrusion variable set with the intrusion policy you select. You can change either of these options, as well as the default action itself, after you create the policy.
To change an access control policy’s default action and related options:
Step 1 Select Configuration > ASA FirePOWER Configuration > Policies > Access Control Policy .
The Access Control Policy page appears.
Step 2 Click the edit icon (
) next to the access control policy you want to configure.
The access control policy editor appears.
Step 3 Select a Default Action .
- To block all traffic, select Access Control: Block All Traffic .
- To trust all traffic, select Access Control: Trust All Traffic .
- To inspect all traffic with an intrusion policy, select an intrusion policy, all of which begin with the label Intrusion Prevention . Keep in mind that an intrusion policy can block traffic.
Caution Do not use
Experimental Policy 1 unless instructed to do so by a Cisco representative. Cisco uses this policy for testing.
Step 4 If you selected an
Intrusion Prevention
default action, click the variables icon (
) to change the variable set associated with the intrusion policy you selected.
In the pop-up window that appears, select a new variable set and click
OK
. You can also edit the selected variable set in a new window by clicking the edit icon (
). If you do not change the variable set, the system uses a default set. For more information, see Working with Variable Sets.
Step 5 Click the logging icon (
) to change logging options for connections handled by the default action.
You can log a matching connection at its beginning and end. Note that the system cannot log the end of blocked traffic. You can log connections to the ASA FirePOWER module event viewer, external system log (syslog) or SNMP trap server. For more information, see Logging Connections Handled by the Access Control Default Action.
Managing Access Control Policies
On the Access Control Policy page ( Configuration > ASA FirePOWER Configuration > Policies > Access Control ) you can view your current custom access control policies, along information on whether a policy is applied.
In addition to custom policies that you create, the system provides a custom policy Default Allow All Traffic that you can edit and use.
Options on the Access Control Policy page allow you to take the actions in the following table.
).
)
), then confirm that you want to delete the policy. You cannot delete an applied access control policy or one that is currently applying.Editing Access Control Policies
When you first create a new access control policy, the access control policy editor appears, focused on the Rules tab. The following graphic shows a newly created policy. Because a new policy does not yet have rules or other configurations, the default action handles all traffic. In this case, the default action inspects traffic with the system-provided Balanced Security and Connectivity intrusion policy before allowing it to its final destination.
Use the access control policy editor to add and organize rules, and so on. The following list provides information on the policy configurations you can change.
To change the policy’s name and description, click the appropriate field and type the new name or description.
Security Intelligence is a first line of defense against malicious Internet content. This feature allows you to immediately blacklist (block) connections based on the latest reputation intelligence. To ensure continual access to vital resources, you can override blacklists with custom whitelists. This traffic filtering takes place before any other policy-based inspection, analysis, or traffic handling, including rules and the default action. For more information, see Blacklisting Using Security Intelligence IP Address Reputation.
Rules provide a granular method of handling network traffic. Rules in an access control policy are numbered, starting at 1. The system matches traffic to access control rules in top-down order by ascending rule number.
In most cases, the system handles network traffic according to the first access control rule where all the rule’s conditions match the traffic. These conditions include security zone, network or geographical location, port, application, requested URL, or user. Conditions can be simple or complex; their use often depends on certain licenses.
Use the Rules tab to add, categorize, enable, disable, filter, and otherwise manage rules. For more information, see Tuning Traffic Flow Using Access Control Rules.
The default action determines how the system handles traffic that is not blacklisted by Security Intelligence and does not match any access control rules. Using the default action, you can block or trust all traffic without further inspection, or inspect traffic for intrusions. You can also enable or disable logging of connections handled by the default action.
For more information, see Setting Default Handling and Inspection for Network Traffic and Logging Connections Based on Access Control Handling.
You can specify what the user sees in a browser when the system blocks that user’s website request—either display a generic system-provided response page, or enter custom HTML. You can also display a page that warns users, but also allows them to click a button to continue or refresh the page to load the originally requested site. For more information, see Displaying a Custom Web Page for Blocked URLs.
Advanced Access Control Options
Advanced access control policy settings typically require little or no modification. The default settings are appropriate for most deployments. Advanced settings you can modify include:
Maximum URL characters to store in connection events —the number of characters you store in the ASA FirePOWER module database for each URL requested by your users; see Logging URLs Detected in Connections.
Allow an Interactive Block to bypass blocking for (seconds) —the length of time before you re-block a website after a user bypasses an initial block; see Setting the User Bypass Timeout for a Blocked Website
Retry URL cache miss lookup —when disabled, allows the system to immediately pass traffic to a URL without a cloud lookup when the category is not cached. The system treats URLs that require a cloud lookup as Uncategorized until the cloud lookup completes with a different category.
Inspect traffic during policy apply —when enabled (the default setting), inspects traffic when you deploy configuration changes unless specific configurations require restarting the Snort process. When enabled, resource demands could result in a small number of packets dropping without inspection.
Use advanced settings to associate subpolicies (SSL, identity) with access control;
Network Analysis and Intrusion Policies
Change the access control policy’s default intrusion policy and associated variable set, which are used to initially inspect traffic before the system can determine exactly how to inspect that traffic; change the access control policy’s default network analysis policy, which governs many preprocessing options:
Intrusion Policy used before Access Control rule is determined — see Setting the Default Intrusion Policy for Access Control.
Intrusion Policy Variable Set —see Working with Variable Sets.
Default Network Analysis Policy —see Setting the Default Network Analysis Policy for Access Control.
Use custom network analysis rules and policies to tailor preprocessing options to specific security zones, networks, and VLANs:
Custom Rules/Policies —see Customizing Preprocessing with Network Analysis Policies.
Tuning File and Malware Inspection Performance and Storage provides information on configuring performance options for file control and AMP for Firepower.
Intelligent Application Bypass Settings
Intelligent Application Bypass (IAB) is an expert-level configuration that specifies applications to bypass or test for bypass if traffic exceeds a combination of inspection performance and flow thresholds. For more information, see Intelligent Application Bypass (IAB).
Transport/Network Layer Preprocessor Settings
Advanced transport and network preprocessor settings apply globally to all networks, zones, and VLANs where you deploy your access control policy. You configure these advanced settings in an access control policy rather than in a network analysis policy. For more information, see Configuring Advanced Transport/Network Settings.
Detection Enhancement Settings
Advanced detection enhancement settings allow you to use adaptive profiles to improve reassembly of packet fragments and TCP streams in passive deployments, based on your hosts' operating systems. For more information, see Tuning Preprocessing in Passive Deployments.
Tuning Intrusion Prevention Performance provides information on improving the performance of your system as it analyzes traffic for attempted intrusions.
Latency-Based Performance Settings
For information specific to latency-based performance settings, see Configuring Packet and Intrusion Rule Latency Thresholds.
When you edit an access control policy, a message indicates that you have unsaved changes. To retain your changes, you must save the policy before exiting the policy editor. If you attempt to exit the policy editor without saving your changes, you are cautioned that you have unsaved changes; you can then discard your changes and exit the policy, or return to the policy editor.
To protect the privacy of your session, after sixty minutes of inactivity on the policy editor, changes to your policy are discarded and you are returned to the Access Control Policy page. After the first thirty minutes of inactivity, a message appears and updates periodically to provide the number of minutes remaining before changes are discarded. Any activity on the page cancels the timer.
To edit an access control policy:
Step 1 Select Configuration > ASA FirePOWER Configuration > Policies > Access Control Policy .
The Access Control Policy page appears.
Step 2 Click the edit icon (
) next to the access control policy you want to configure.
The access control policy editor appears.
Step 3 Edit your policy. Take any of the actions summarized above.
Step 4 Save or discard your configuration:
- To save your changes and continue editing, click Store ASA FirePOWER Changes.
- To save your changes and apply your policy, click Apply ASA FirePOWER Changes . See Deploying Configuration Changes.
- To discard your changes, click Cancel and, if prompted, click OK .
Understanding Out-of-Date Policy Warnings
On the Access Control Policy page ( Configuration > ASA FirePOWER Configuration > Policies > Access Control ), out-of-date policies are marked with red status text.
In almost every case, whenever you change an access control policy, you must reapply it for the change to take effect. If the access control policy invokes other policies or relies on other configurations, changing those also requires that you reapply the access control policy (or, for intrusion policy changes, you can reapply just the intrusion policy).
Configuration changes that require a policy reapply include:
- Modifying the access control policy itself: any changes to access control rules, the default action, Security Intelligence filtering, advanced options including NAP rules, and so on.
- Changing any of the intrusion and file policies that the access control policy invokes: network analysis policies, intrusion policies, and file policies.
- Changing any reusable object or configuration used in the access control policy or the policies it invokes: network, port, URL, and geolocation objects; Security Intelligence lists and feeds; application filters or detectors; intrusion policy variable sets; file lists; security zones, and so on.
- Updating the system software, intrusion rules, or the vulnerability database (VDB).
Keep in mind that you can change some of these configurations from multiple places in the ASA FirePOWER module interface. For example, you can modify security zones using the object manager ( Configuration > ASA FirePOWER Configuration > Object Management ).
Note that the following updates do not require policy reapply:
To determine why an access control or intrusion policy is out of date, use the comparison viewer.
To determine why an access control policy is out of date:
Step 1 Select Configuration > ASA FirePOWER Configuration > Policies > Access Control Policy .
The Access Control Policy page appears. Policies that are out of date are marked with red status text that indicates that the ASA FirePOWER module needs a policy update.
Step 2 Click the policy status for an out-of-date policy.
The detailed Apply Access Control Policy pop-up window appears.
Step 3 Click Out-of-date next to the changed component you are interested in.
A policy comparison report appears in a new window. For more information, see Comparing Access Control Policies and Comparing Two Intrusion Policies or Revisions.
Step 4 Optionally, reapply the policy.
See Deploying Configuration Changes.
Deploying Configuration Changes
After you use the ASA FirePOWER module to configure your deployment, and any time you make changes to that configuration, you must deploy the new configuration.
This deploy action distributes the following configuration components:
- Access control policies and all associated policies: DNS, file, identity, intrusion, network analysis, SSL
- Any associated rule configurations and objects associated with a policy to be deployed
- Intrusion rule updates
- Device and interface configurations
Caution In special cases, deploying configuration changes may cause a short pause in traffic flow and processing, and may also cause a few packets to pass uninspected. To minimize inconvenience, deploy during a change window.
To deploy configuration changes:
Step 1 Click Deploy and select Deploy FirePOWER Changes .
Step 3 If the system identifies errors or warnings in the changes to be deployed, you have the following choices:
- Click Proceed to continue deploying without resolving error or warning conditions.
- Click Cancel to exit without deploying. Resolve the error and warning conditions, and attempt to deploy the configuration again.
ASA FirePOWER module Applying includesASA FirePOWER module a or you might be able to select as few as three intrusion policies across an entire access control policy.
Troubleshooting Access Control Policies and Rules
Properly configuring access control policies, especially creating and ordering access control rules, is a complex task. However, it is a task that is essential to building an effective deployment. If you do not plan your policy carefully, rules can preempt other rules or contain invalid configurations. Both rules and other policy settings can require additional licenses.
To help ensure that the system handles traffic as you expect, the access control policy interface has a robust feedback system. Icons in the access control policy and rule editors mark warnings and errors, as described in the Access Control Error Icons table.
Tip In the access control policy editor, click Show Warnings to display a pop-up window that lists all the warnings for the policy.
Additionally, the system warns you at apply-time of any issues that could affect traffic analysis and flow.
If a rule or configuration has an error, you cannot apply the policy until you correct the issue, even if you disable any affected rules. |
||
You can apply an access control policy that displays rule or other warnings. However, misconfigurations marked with warnings have no effect. For example, you can apply a policy that contains preempted rules or rules that cannot match traffic due to misconfiguration—conditions using empty object groups, configuring URL conditions without having enabled cloud communications, and so on. These rules do not evaluate traffic. If you disable a rule with a warning, the warning icon disappears. It reappears if you enable the rule without correcting the underlying issue. As another example, many features require a specific license. An access control policy successfully applies only to an eligible device. |
||
Information icons convey helpful information about configurations that may affect the flow of traffic. These issues do not prevent you from applying the policy. For example, if you are performing application control or URL filtering, the system may skip matching the first few packets of a connection against some access control rules, until the system identifies the application or web traffic in that connection. This allows connections to be established so that applications and HTTP requests can be identified. For more information, see Limitations to Application Control and Limitations to URL Detection and Blocking. |
Properly configuring access control policies and rules can also reduce the resources required to process network traffic. Creating complex rules, invoking many different intrusion policies, and mis-ordering rules can all affect performance.
- Simplifying Rules to Improve Performance
- Understanding Rule Preemption and Invalid Configuration Warnings
- Ordering Rules to Improve Performance and Avoid Preemption
Simplifying Rules to Improve Performance
Complex access control policies and rules can command significant resources. When you apply an access control policy, the system evaluates all the rules together and creates an expanded set of criteria that the ASA FirePOWER module uses to evaluate network traffic. A pop-up window may warn that you have exceeded the maximum number of access control rules or intrusion policies supported.
Simplifying Access Control Rules
The following guidelines can help you simplify access control rules and improve performance:
- When constructing a rule, use as few individual elements in your conditions as possible. For example, in network conditions, use IP address blocks rather than individual IP addresses. In port conditions, use port ranges. Use application filters and URL categories and reputations to perform application control and URL filtering, and LDAP user groups to perform user control.
Note that combining elements into objects that you then use in access control rule conditions does not improve performance. For example, using a network object that contains 50 individual IP addresses gives you only an organizational—not a performance—benefit over including those IP addresses in the condition individually.
- Restrict rules by security zones whenever possible. If a device’s interfaces are not in one of the zones in a zone-restricted rule, the rule does not affect performance on that device.
- Do not overconfigure rules. If one condition is enough to match the traffic you want to handle, do not use two.
Avoiding Intrusion Policy and Variable Set Proliferation
The number of unique intrusion policies you can use to inspect traffic in an access control policy depends on the complexity of your policies: you can associate one intrusion policy with each Allow and Interactive Block rule, as well as with the default action. Every unique pair of intrusion policy and variable set counts as one policy. You might be able to select as few as three intrusion policies across an entire access control policy.
If you exceed the number of intrusion policies supported, reevaluate your access control policy. You may want to consolidate intrusion policies or variable sets.
Check to see how many policies you select and how many variable sets those policies use in each of the following locations in your access control policy: the Intrusion Policy used before Access Control rule is determined option in the Advanced access control policy settings, the default action for the access control policy, and the inspection settings for any access control rules in the policy.
Understanding Rule Preemption and Invalid Configuration Warnings
Properly configuring and ordering access control rules (and, in advanced deployments, network analysis rules) is essential to building an effective deployment. Within an access control policy, access control rules can preempt other rules or contain invalid configurations. Similarly, network analysis rules, which you configure using the access control policy’s advanced settings, can have the same issues. The system uses warning and error icons to mark these.
Understanding Rule Preemption Warnings
The conditions of an access control rule may preempt a subsequent rule from matching traffic. For example:
The second rule above will never block traffic because the first rule will have already allowed the traffic.
- Any type of rule condition can preempt a subsequent rule.
- A rule also preempts an identical subsequent rule where all configured conditions are the same.
- A subsequent rule would not be preempted if any condition is different.
Understanding Invalid Configuration Warnings
Because outside settings that the access control policy depends on may change, an access control policy setting that was valid may become invalid. Consider the following examples:
- If you add a port group to the source ports in a rule, then change the port group to include an ICMP port, the rule becomes invalid and a warning icon appears next to it. You can still apply the policy, but the rule will have no effect on network traffic.
- If you add a user to a rule, then change your LDAP user awareness settings to exclude that user, the rule will have no effect because the user is no longer an access controlled user.
Ordering Rules to Improve Performance and Avoid Preemption
Rules in an access control policy are numbered, starting at 1. The system matches traffic to rules in top-down order by ascending rule number. With the exception of Monitor rules, the first rule that traffic matches is the rule that handles that traffic.
Proper access control rule order reduces the resources required to process network traffic, and prevents rule preemption. Although the rules you create are unique to every organization and deployment, there are a few general guidelines to follow when ordering rules that can optimize performance while still addressing your needs.
Order Rules from Most to Least Critical
First, you must order rules to suit your organization's needs. Place priority rules that must apply to all traffic near the top of the policy. For example, if you want to inspect traffic from a single user for intrusions (using an Allow rule), but trust all other users in the department (using a Trust rule), place two access control rules in that order.
Order Rules from Specific to General
You can improve performance by placing specific rules earlier, that is, rules that narrowly define the traffic they handle. This is also important because rules with broad conditions can match many different types of traffic, and can preempt later, more specific rules.
Consider a scenario where you want to block most social networking sites, but allow access to certain others. For example, you may want your graphic designers to be able to access Creative Commons Flickr and deviantART content, but not access other sites such as Facebook or Google+. You should order your rules as follows:
the first rule blocks all social networking traffic, including Flickr and deviantART. Because no traffic will ever match the second rule, your designers cannot access the content you wanted to make available.
Place Rules that Inspect Traffic Later
Because intrusion, file, and malware inspection require processing resources, placing rules that do not inspect traffic (Trust, Block) before rules that do (Allow, Interactive Block) can improve performance. This is because Trust and Block rules can divert traffic that the system might otherwise have inspected. All other factors being equal, that is, given a set of rules where none is more critical and preemption is not an issue, consider placing them in the following order:
- Monitor rules that log matching connections, but take no other action on traffic
- Trust and Block rules that handle traffic without further inspection
- Allow and Interactive Block rules that do not inspect traffic further
- Allow and Interactive Block rules that optionally inspect traffic for malware, intrusions, or both
Generating a Report of Current Access Control Settings
An access control policy report is a record of the policy and rules configuration at a specific point in time. You can use the report, which contains the following information, for auditing purposes or to inspect the current configuration.
You can also generate an access control comparison report that compares a policy with the currently applied policy or with another policy. For more information, see Comparing Access Control Policies.
To view an access control policy report:
Step 1 Select Configuration > ASA FirePOWER Configuration > Policies > Access Control Policy .
The Access Control Policy page appears.
Step 2 Click the report icon (
) next to the policy for which you want to generate a report. Remember to save any changes before you generate an access control policy report; only saved changes appear in the report.
The system generates the report. You are prompted to save the report to your computer.
Comparing Access Control Policies
To review policy changes for compliance with your organization’s standards or to optimize system performance, you can examine the differences between two access control policies. You can compare any two policies or the currently applied policy with another policy. Optionally, after you compare, you can then generate a PDF report to record the differences between the two policies.
There are two tools you can use to compare policies:
- The comparison view displays only the differences between two policies in a side-by-side format. The name of each policy appears in the title bar on the left and right sides of the comparison view except when you select Running Configuration , in which case a blank bar represents the currently active policy.
You can use this to view and navigate both policies on the module interface, with their differences highlighted.
- The comparison report creates a record of only the differences between two policies in a format similar to the policy report, but in PDF format.
You can use this to save, copy, print, and share your policy comparisons for further examination.
For more information on understanding and using the policy comparison tools, see:
Using the Access Control Policy Comparison View
The comparison view displays both policies in a side-by-side format, with each policy identified by name in the title bar on the left and right sides of the comparison view. When comparing two policies other than the running configuration, the time of last modification and the last user to modify are displayed with the policy name.
Differences between the two policies are highlighted:
- Blue indicates that the highlighted setting is different in the two policies, and the difference is noted in red text.
- Green indicates that the highlighted setting appears in one policy but not the other.
You can perform any of the actions in the following table.
click Previous or Next above the title bar.
The double-arrow icon ( |
|
|
The Select Comparison window appears. See Using the Access Control Policy Comparison Report for more information. |
|
|
The policy comparison report creates a PDF document that lists only the differences between the two policies. |
) centered between the left and right sides moves, and the
Difference
number adjusts to identify which difference you are viewing.Using the Access Control Policy Comparison Report
An access control policy comparison report is a record of all differences between two access control policies or a policy and the currently applied policy identified by the policy comparison view, presented in PDF format. You can use this report to further examine the differences between two policy configurations and to save and disseminate your findings.
You can generate an access control policy comparison report from the comparison view for any policies to which you have access. Remember to save any changes before you generate a policy report; only saved changes appear in the report.
The format of the policy comparison report is the same as the policy report with one exception: the policy report contains all configurations in the policy, and the policy comparison report lists only those configurations that differ between the policies. An access control policy comparison report contains the sections described in Table 4-5.
Tip You can use a similar procedure to compare network analysis, intrusion, file, or system policies.
To compare two access control policies:
Step 1 Select Configuration > ASA FirePOWER Configuration > Policies > Access Control Policy .
The Access Control Policy page appears.
Step 2 Click Compare Policies .
The Select Comparison window appears.
Step 3 From the Compare Against drop-down list, select the type of comparison you want to make:
The page refreshes and the Policy A and Policy B drop-down lists appear.
The page refreshes and the Target/Running Configuration A and Policy B drop-down lists appear.
Step 4 Depending on the comparison type you selected, you have the following choices:
Step 5 Click OK to display the policy comparison view.
Step 6 Optionally, click Comparison Report to generate the access control policy comparison report.
The access control policy comparison report appears. You are prompted to save the report to your computer.
Feedback