- Introduction to the Cisco ASA FirePOWER Module
- Managing Reusable Objects
- Managing Device Configuration
- Getting Started with Access Control Policies
- Blacklisting Using Security Intelligence IP Address Reputation
- Tuning Traffic Flow Using Access Control Rules
- Controlling Traffic with Network-Based Rules
- Controlling Traffic with Reputation-Based Rules
- Access Control Rules: Realms and Users
- Access Control Rules: Custom Security Group Tags
- Controlling Traffic Using Intrusion and File Policies
- Intelligent Application Bypass
- Access Control Using Content Restriction
- Understanding Traffic Decryption
- Getting Started with SSL Policies
- Getting Started with SSL Rules
- Tuning Traffic Decryption Using SSL Rules
- Understanding Network Analysis and Intrusion Policies
- Using Layers in a Network Analysis or Intrusion Policy
- Customizing Traffic Preprocessing
- Getting Started with Network Analysis Policies
- Using Application Layer Preprocessors
- Configuring SCADA Preprocessing
- Configuring Transport & Network Layer Preprocessing
- AC Adaptive Profiles
- Getting Started with Intrusion Policies
- Tuning Intrusion Policies Using Rules
- Detecting Specific Threats
- Globally Limiting Intrusion Event Logging
- Understanding and Writing Intrusion Rules
- Introduction to Identity Data
- Realms and Identity Policies
- User Identity Sources
- DNS Policies
- Blocking Malware and Prohibited Files
- Logging Connections in Network Traffic
- Viewing Events
- Configuring External Alerting
- Configuring External Alerting for Intrusion Rules
- Using the ASA FirePOWER Dashboard
- Using ASA FirePOWER Reporting
- Scheduling Tasks
- Managing System Policies
- Configuring ASA FirePOWER Module Settings
- Licensing the ASA FirePOWER Module
- Updating ASA FirePOWER Module Software
- Monitoring the System
- Using Backup and Restore
- Generating Troubleshooting Files
- Importing and Exporting Configurations
- Viewing the Status of Long-Running Tasks
- Security, Internet Access, and Communication Ports
Access Control Rules: Realms and Users
The following topics describe how to control user traffic on your network:
Realm, User, User Group, and ISE Attribute Access Control Rule Conditions
Before you can perform user control (create access control rule conditions based on entire realms, individual users, user groups, or ISE attributes), you must:
- Configure a realm for each Microsoft Active Directory or LDAP server you want to monitor. If you enable user download for the realm, the Firepower Management Center regularly and automatically queries the server to download metadata for newly or already-reported authoritative users and user groups.
Note Configuring a realm is optional if you plan to configure SGT ISE attribute conditions but not user, group, realm, Endpoint Location, or Endpoint Profile conditions.
- Create an identity policy to associate the realm with an authentication method.
- Configure one or more User Agents or ISE/ISE-PIC devices, or captive portal. If you want to use an ISE attribute condition, you must configure ISE.
User Agents, ISE/ISE-PIC, and captive portal collect authoritative user data that can be used for user control in access control rule conditions. The identity sources monitor specified users as they log in or out of hosts or authenticate using LDAP or AD credentials.
Note If you configure a User Agent or ISE/ISE-PIC device to monitor a large number of user groups, or if you have a very large number of users mapped to hosts on your network, the system may drop user mappings based on groups, due to your Firepower Management Center user limit. As a result, access control rules with realm, user, or user group conditions may not fire as expected.
You can add a maximum of 50 realms, users, and groups to the Selected Users in a single user condition. Conditions with user groups match traffic to or from any of the group’s members, including members of any sub-groups, with the exception of individually excluded users and members of excluded sub-groups.
Including a user group automatically includes all of that group’s members, including members of any secondary groups. However, if you want to use the secondary group in access control rules, you must explicitly include the secondary group.
Note Hardware-based fast-path rules, Security Intelligence-based traffic filtering, SSL inspection, user identification, and some decoding and preprocessing occur before access control rules evaluate network traffic.
Troubleshooting Issues with User Access Control Rules
If you notice unexpected user access control rule behavior, consider tuning your rule, identity source, or realm configurations.
Access control rules targeting realms, users, or user groups are not firing
If you configure a User Agent or ISE/ISE-PIC device to monitor a large number of user groups, or if you have a very large number of users mapped to hosts on your network, the system may drop user records due to your Firepower Management Center user limit. As a result, access control rules with realm or user conditions may not fire as expected.
Access control rules targeting user groups or users within user groups are not firing as expected
If you configure an access control rule with a user group condition, your LDAP or Active Directory server must have user groups configured. The Firepower Management Center cannot perform user group control if the server organizes the users in basic object hierarchy.
Access control rules targeting users in secondary groups are not firing as expected
If you configure an access control rule with a user group condition that includes or excludes users who are members of a secondary group on your Active Directory server, your server may be limiting the number of users it reports.
By default, Active Directory servers limit the number of users they report from secondary groups. You must customize this limit so that all of the users in your secondary groups are reported to the Firepower Management Center and eligible for use in access control rules with user conditions.
Access control rules are not matching users when seen for the first time
After the system detects activity from a previously-unseen user, the system retrieves information from the server. Until the system successfully retrieves this information, activity seen by this user is not handled by matching access control rules. Instead, the user session is handled by the next access control rule it matches (or the access control policy default action).
For example, this may explain when:
- Users who are members of user groups are not matching access control rules with user group conditions.
- Users who were reported by ISE/ISE-PIC or the User Agent are not matching access control rules, when the server used for user data retrieval is an Active Directory server.
Note that this may also cause the system to delay the display of user data in event views and analysis tools.
Adding a Realm, User, or User Group Condition to an Access Control Rule
- Configure one or more authoritative user identity sources as described in User Identity Sources.
- Configure a realm as described in Creating a Realm. A user download (automatic or on-demand) must be performed before you can configure realm, user, or user group conditions in an access control rule.
Step 1 In the access control rule editor, select the Users tab.
Step 2 Search by name or value above the Available Realms list and select a realm.
Step 3 Search by name or value above the Available Users list and select a user or group.
Step 4 Click Add to Rule , or drag and drop.
Step 5 Save or continue editing the rule.
- Deploy configuration changes; see Deploying Configuration Changes.
Configuring ISE Attribute Conditions
- Configure a realm as described in Creating a Realm. A user download (automatic or on-demand) must be performed before you can configure an ISE attribute condition in an access control rule.
Note Configuring a realm is optional if you plan to configure SGT ISE attribute conditions but not user, group, realm, Endpoint Location, or Endpoint Profile conditions.
- Configure ISE as described in Configuring an ISE/ISE-PIC Connection.
Note The ISE-PIC identity source does not provide ISE attribute data. You must configure ISE.
Step 1 In the access control rule editor, click the SGT/ISE Attributes tab.
Step 2 Search by name or value above the Available Attributes list and choose an attribute.
Step 3 Search by name or value above the Available Metadata list and choose metadata.
Step 4 Click Add to Rule , or drag and drop.
Step 5 Constrain the rule with an IP address in the Add a Location IP Address field.
Note You can use ISE-assigned Security Group Tags (SGTs) to constrain ISE attribute conditions. To use custom SGTs in access control rules, see ISE SGT v. Custom SGT Rule Conditions.
Step 6 Save or continue editing the rule.
- Deploy configuration changes; see Deploying Configuration Changes.
Feedback