Using Lookups

The following topics explain how to look up information about entities that may or may not be known to the Firepower System:

Introduction to Lookups

If your Firepower Management Center is connected to the Internet, you can use manual lookup features to find the following information:

  • Regional Information Registries (RIR) information (whois) for any IP address.

  • URL category and reputation as classified by the URL Filtering feature.

  • Geolocation information for any IP address: country name, country code, and continent name. (To ensure that you are using up-to-date geolocation information, Cisco strongly recommends that you regularly update the Geolocation Database (GeoDB) on your Firepower Management Center.)

Finding URL Category and Reputation

You can manually look up category and reputation of URLs. Use this feature to see how particular URLs are evaluated in order to plan, adjust, or troubleshoot policy processing, or to investigate potentially problematic URLs that come to your attention via sources outside your Cisco solution. The categories and reputations in these results are the same as those that are used by the URL Filtering feature.

Before you begin

Procedure


Step 1

Select Analysis > Advanced > URL.

Step 2

Enter up to 250 URLs and public, routable IP addresses, in any common format (for example, URLs may be with or without "http", "www", or a subdomain, or may be shortened). Separate each entity with a space or a return.

Wildcards such as asterisks (*) are not supported.

Step 3

Click Search.

If you enter many URLs and your network is slow, processing may take several minutes.

If you see an error message that the URL is not valid, check your spelling or try a different variation of the URL. For example, add or omit the "www" or "http" or "https" prefix.

A URL may belong to up to six categories but has only one reputation.

Step 4

(Optional) Sort the results by clicking a column heading.

Step 5

(Optional) To save the results as a CSV file, click Export CSV.

An additional column for reputation level is included in the CSV file so you can sort by risk. Zero (0) represents an unknown risk, for a URL for which the system has insufficient risk data.


What to do next

If you want to view lists of possible categories and reputations, go to Policies > Access Control > Access Control, click a policy or add a new one, click Add Rule, then click URLs.

Finding Geolocation Information for an IP Address

You can use the geolocation lookup feature to find the country name, ISO 3166-1 three-digit country code, and continent name associated with any IP address.

Procedure


Step 1

Choose Analysis > Advanced > Geolocation.

Step 2

To view the geolocation information for one or more IP addresses, enter the address or addresses and click Search. You may specify IPv4 addresses, IPv6 addresses, or both. Use a comma, semicolon, return, or any white space character to separate multiple addresses.

Tip

 

Click Clear to clear the text box.

Step 3

Optionally, click the column titles to sort the data. You can sort by any field except IP Address.

Step 4

(Optional) To save the results as a CSV file, click Export CSV.