The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Administrator windows let you perform several general administrative operations, including enabling HTTP and HTTPS access to the IP camera, configuring users, resetting or rebooting the IP camera, and updating firmware.
The following sections describe the Administration windows in detail:
The Initialization window provides options for configuring passwords for the IP camera default administrator accounts, and for configuring which protocols can be used to access the IP camera.
The IP camera always has an HTTP/HTTPS administrator who can access the IP camera through an HTTP or HTTPS connection. The name of this administrator is admin . The password is configurable.
If you want to access the IP camera through SSH, you must configure a password for an SSH administrator. The name of this administrator is root . The password is configurable.
To display the Initialization window, perform the following steps:
Step 1 From the IP camera user interface, click the Setup link.
Step 2 Click Administration to expand the menu.
Step 3 From the Administration menu, click Initialization .
The Initialization window appears. If you change any options in this window, you must click the Save button to save the changes. If you do not click this button, changes are not retained when you exit the window. The Save button appears at the bottom of the window. You might need to scroll down to it.
Table 9-1 describes the options in the Initialization window.
The User window lets you configure the following types of IP camera users:
There is always at least one user with Administrator privileges configured. The user name of this user is “admin.” You can configure up to four additional users and assign privilege levels to each one.
When you configure users, follow these guidelines:
To display the User window, perform the following steps:
Step 1 From the IP camera user interface, click the Setup link.
Step 2 Click Administration to expand the menu.
Step 3 From the Administration menu, click Users .
Table 9-2 describes the options in the User window.
The Maintenance window provides options for setting or restarting the IP camera, saving configuration information from the IP camera, and uploading the configuration information to the IP camera.
Saving and uploading configuration is useful for these activities:
To display the Maintenance window, perform the following steps:
Step 1 From the IP camera user interface, click the Setup link.
Step 2 Click Administration to expand the menu.
Step 3 From the Administration menu, click Maintenance .
The Maintenance window appears.
Table 9-3 describes the options in the Maintenance window.
Click the Restore button to reset all IP camera settings to their factory default values. To confirm the restore procedure, click OK in the confirmation pop-up window. Otherwise, click Cancel . This action has the same effect as pressing and holding the Reset button on the IP camera for at least 15 seconds. After you perform this procedure, follow the steps in the Chapter2, “Performing the Initial Setup of the IP Camera” Note You also can perform a restore procedure by using the command line, as described in the “Restoring or Resetting the IP Camera from the Command Line” section. Using the command line can be useful if you cannot access the web-based menus for the IP camera. |
|
Click the Reset button to reset all IP camera settings except static network settings, user information (user name, password, and privilege level for each user), and ONVIF setting (enabled or disabled) to their factory default values. To confirm the restore procedure, click OK in the confirmation pop-up window. Otherwise, click Cancel . Note You also can perform a reset procedure from the command line, as described in the “Restoring or Resetting the IP Camera from the Command Line” section. Using the command line can be useful if you cannot access the web-based menus for the IP camera. |
|
Click the Reboot button to reboot the software on IP camera. To confirm the reboot procedure, click OK in the confirmation pop-up window. Otherwise, click Cancel . This action has the same effect as pressing and immediately releasing the Reset button on the IP camera, or powering the IP camera down and then powering it up. |
|
Click the Export button to save the current IP camera configuration information to a binary file. Check the Exclude Network Basic and IP Addressing Setting check box if you do not want the configuration to contain network basic configuration information and the IP address of the camera. When you click this button, the File Download window appears. Use this window to save the configuration file. You can then load this configuration information to any same-model IP camera in the network. This feature is useful for creating a backup of this configuration and for configuring other IP cameras based on this configuration. |
|
Path and folder where a configuration file is stored. You can click Browse to find this location. After you enter this information, click Import to load the configuration file to the IP camera. After you upload a configuration file to the IP camera, the IP camera restarts automatically. If you upload configuration from another IP camera that is active in your network, make sure to configure this IP camera with a name, description, and unique IP address (if not obtained through DHCP). To change these options, see the “Basic Window” section and the “IP Addressing Window” section. A configuration file that you upload includes the passwords that are configured for the administrator and for users. If you change any passwords after saving the configuration file, be aware that uploading the file overwrites the new passwords with the saved ones. |
|
Click the Export button to save the current IP camera log information in .tar.gz format. When you click this button, the File Download window appears. Use this window to save the log file. Depending on the size of logs it may take some time to download the logs. |
|
Click the Clear button from the Camera Logs section to clear the camera log information from the IP camera. Depending on the amount of log information, it may take some time to clear the information. |
The Firmware window lets you view information about the firmware that is installed on the IP camera and upgrade the firmware.
Before you upgrade firmware, download the firmware file to a PC that is accessible on your network and unzip the file if it is zipped. To download firmware, go to this web page:
http://www.cisco.com/en/US/products/ps6918/Products_Sub_Category_Home.html
After you upgrade firmware, the IP camera restarts automatically. It retains all configuration information.
To display the Firmware window, perform the following steps:
Step 1 From the IP camera user interface, click the Setup link.
Step 2 Click Administration to expand the menu.
Step 3 From the Administration menu, click Firmware .
Table 9-4 describes the options in the Firmware window.
Display only . ID of the IP camera, as configured in the Basic window. For more information, see the “Basic Window” section. |
|
Click this button to display a pop-up window with additional information about the firmware on the IP camera (for example, bootloader version). |
|
To upgrade the firmware on the IP camera, begin by entering the path and folder where the new firmware file for the IP camera is stored. The upgrade file might be stored on another PC. Click Browse to find this location. |
|
After entering the path and folder for the firmware file, click this button to load the firmware upgrade on the IP camera. Do not power down the IP camera during the upgrade procedure. |
The Device Processes window displays the processes that occupy TCP or UDP ports, and lets you stop any of these processes.
Note To stop any process, click the Delete button that appears to the right of the process in the window.
Take care when stopping processes because some processes are required for the camera to operate properly. Processes that you stop in this window can restart the next time that you log in to the IP camera. If you delete a required process and the camera stops functioning, exit your web browser and then log back in to the IP camera to restart the process. If the process does not restart, power the IP camera off and then back on.
To display the Device Processes window, perform the following steps:
Step 1 From the IP camera user interface, click the Setup link.
Step 2 Click Administration to expand the menu.
Step 3 From the Administration menu, click Device Processes .
The Device Processes window appears.
Table 9-5 describes the options in the Device Processes window. All options are for display only.
IP camera administrator and user passwords must always meet the requirements that are described in the “User Window” section. The Password Complexity window provides options for configuring additional requirements for the IP camera passwords.
To display the Password Complexity window, perform the following steps:
Step 1 From the IP camera user interface, click the Setup link.
Step 2 Click Administration to expand the menu.
Step 3 From the Administration menu, click Password Complexity .
The Password Complexity window appears. If you change any options in this window, you must click the Save button to save the changes. If you do not click this button, changes are not retained when you exit the window. The Save button appears at the bottom of the window. You might need to scroll down to it.
Table 9-6 describes the options in the Password Complexity window.