The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Numerics
16 x D1 and 8 x D1 video capture cards
BNC breakout panel
description E-10
front connectors E-12
illustration E-11
rear receptacles E-11
receptacles E-11
connector E-6
description E-2
encoding parameter limitations E-4
features E-4
LED E-6
overview E-1
part numbers E-12
PTZ analog cameras, using with E-14
requirements for E-3
specifications E-13
video channel numbers E-6
1-RU Multiservices Platform Series
general specifications 1-1
2-RU Multiservices Platform
general specifications 1-1
power specifications A-3
A
activity
hard disk drive 1-3
hard drive 1-3
network 1-3
air flow 2-14
B
brackets, in square hole to round hole adapter set 2-5
C
chassis
air flow 2-14
cover 2-11
hard drive B-3
rack mounting 2-2
removing cover 2-11
replacing cover 2-12
control panel 1-2
F
fan
failure 1-3
hot swappable 2-12
installing 2-12
removing 2-12
replacing 2-12
fiber channel card C-1
H
hard drive
activity 1-3
hot swapping B-3
recovering from failure B-1
replacing B-3
hard drive bay LED 1-3
HDD LED 1-3
hot swappable
fan 2-12
power supply 2-13
hot swapping, hard drive B-3
I
inner rack rails, attaching to Multiservices Platform Series 2-7
inner rack rails, releasing 2-6
installing, hard drive 2-10, B-3
Intelligent Platform Management Interface (IPMI)
rebooting Multiservices Platform Series with F-2
rebooting Multiservices Platform using F-1
setting up on Multiservices Platform Series F-1
L
LED
0verheat/fan fail 1-3
drive bay 1-3
HDD 1-3
NIC 1 1-3
NIC 2 1-3
on Multiservices Platform Series chassis 1-2
power 1-3
power failure 1-2
M
model numbers, of Multiservices Platform Series 1-v, 1-1
Multiservices Platform Series
1-RU model 1-1
2-RU model 1-1
control panel 1-2
description of models 1-v, 1-1
fan 2-12
general specifications A-1
hard drive
installing 2-10
replacing B-3
key features 1-2
LEDs 1-2
network, connecting to 2-11
power, connecting to 2-11
powering off 1-2
powering on 1-2
power specifications A-2
power supply 2-13
rear panel 1-4
rebooting
from server 1-2
remotely using IPMI F-2
reimaging
when running Cisco IPICS B-6
when running Cisco PAM B-7
when running VSM B-5
resetting 1-2
setting up IPMI on F-1
shutting down 1-2
system specifications 1-1
unpacking 2-2
N
network, connecting to 2-11
network activity 1-3
NIC 1 LED 1-3
NIC 2 LED 1-3
O
option card
16 x D1 and 8 x D1 video capture cards E-1
fiber channel card C-1
video capture card D-1
outer rack rails, attaching to rack 2-8
Overheat/Fan Fail LED 1-3
P
power, connecting to 2-11
Power button 1-2
Power Failure LED 1-2
powering
off 1-2
on 1-2
Power LED 1-3
power supply
hot swappable 2-13
installing 2-13
removing 2-13
power supply replacing 2-13
R
rack mounting
attaching inner rack rails 2-7
attaching outer rack rails 2-8
considerations 2-3
guidelines 2-3
location 2-3
overview 2-2
placing Multiservices Platform Series in rack 2-9
precautions 2-3
square hole to round hole adapter 2-5
rebooting, Multiservices Platform Series 1-2
reimaging, Multiservices Platform Series
when running Cisco IPICS B-6
when running Cisco PAM B-7
when running VSM B-5
replacing, hard drive B-3
Reset button 1-2
resetting, Multiservices Platform Series 1-2
S
shutting down 1-2
specifications
16 x D1 and 8 x D1 video capture cards E-13
power
1-RU Multiservices Platform Series A-1, A-2
2-RU Multiservices Platform A-3
system 1-1
square hole to round hole adapter set 2-5
U
unpacking, Multiservices Platform Series 2-2
V
video capture card D-1